Author: 林軒毅Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Electrical Characteristics of Amorphous Indium-gallium-zinc-oxide Thin-film Transistors and Enhanced Ultra-thin-body Mosfets by Charged Buried Oxide
Author: 林軒毅Investigating the Electrical Characteristics of Amorphous Indium Gallium Zinc Oxide Thin Film Transistors
Author: 吳昱陞Amorphous Indium Gallium Zinc Oxide Thin-Film Transistors, Non-volatile Memory and Circuits for Transparent Electronics
Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The ability to make electronic devices, that are transparent to visible and near infrared wavelength, is a relatively new field of research in the development of the next generation of optoelectronic devices. A new class of inorganic thin-film transistor (TFT) channel material based on amorphous oxide semiconductors, that show high carrier mobility and high visual transparency, is being researched actively. The purpose of this dissertation is to develop amorphous oxide semiconductors by pulsed laser deposition, show their suitability for TFT applications and demonstrate other classes of devices such as non-volatile memory elements and integrated circuits such as ring oscillators and active matrix pixel elements. Indium gallium zinc oxide (IGZO) is discussed extensively in this dissertation. The influence of several deposition parameters is explored and oxygen partial pressure during deposition is found to have a profound effect on the electrical and optical characteristics of the IGZO films. By optimizing the deposition conditions, IGZO TFTs exhibit excellent electrical properties, even without any intentional annealing. This attribute along with the amorphous nature of the material also makes IGZO TFTs compatible with flexible substrates opening up various applications. IGZO TFTs with saturation field effect mobility of 12 â€" 16 cm2 V-1 s-1 and subthreshold voltage swing of 200 mV decade-1 have been fabricated. By varying the oxygen partial pressure during deposition the conductivity of the channel was controlled to give a low off-state current ~ 10 pA and a drain current on/off ratio of 1 x108. Additionally, the effects of the oxygen partial pressure and the thickness of the semiconductor layer, the choice of the gate dielectric material and the device channel length on the electrical characteristics of the TFTs are explored. To evaluate IGZO TFT electrical stability, constant voltage bias stress measurements were carried out. The observed logarithmic depende.
Electrical Characterization and Reliability Study of Amorphous Indium-gallium-zinc Oxide Thin-film Transistors
Author: 馮正倫Composition Engineering for Solution-Processed Gallium-Rich Indium-Gallium-Zinc-Oxide Thin Film Transistors
Author: Isaac Caleb WangPublisher:
ISBN:
Category :
Languages : en
Pages : 60
Book Description
Metal oxides have risen to prominence in recent years as a promising active layer for thin film transistors (TFTs). One of the main reasons for this has been its value in display technology. Conventionally, displays have relied on amorphous hydrogenated silicon (a-Si:H) TFTs but the demand for large area displays with high resolution, fast response time, low power consumption and compatibility with integrated driving circuits have prompted research into other semiconducting materials. As a result, metal oxides have become major prospects to replace a-Si:H with their high-performance electrical characteristics and simplicity of processing, making them valuable switching elements in display technology. Particularly, quaternary metal oxides such as the amorphous Indium-Gallium-Zinc-Oxide (IGZO) have demonstrated extremely high performances as TFTs, prompting extensive research in the field. The conventional method of producing metal oxide thin films has been through vacuum deposition methods such as sputtering. However, for large area applications these vacuum deposition methods face inherent limitations which prevent easy application and device fabrication. Facing these restrictions, solution-processing has become a popularly researched alternative in producing metal oxide thin films due to their simple processing requirements, low cost, and ability to be applied over large areas. In solution-processed IGZO, there have been a couple approaches to improve device performance and stability as well as simplify processing. In this work, we produce a gallium-rich 2:2:1 IGZO TFT using solution processes and study its electrical characteristics and stability. In this paper, we demonstrate a working solution-processed gallium-rich 2:2:1 IGZO TFT and compare it to a solution-processed indium-rich device to quantify its stability and performance. Through this work, we show that solution-processing is a viable fabrication method for gallium-rich IGZO, which can be a high-stability alternative to other compositions of IGZO devices.
High Mobility and Enhanced Reliability Amorphous Indium-gallium-zinc Oxide Thin-film Transistors
Author: 羅傑Reliability and Physical Mechanisms of Amorphous Indium Gallium Zinc Oxide Thin-Film Transistors for Advanced Display
Author: Amorphous Indium Gallium Zinc Oxide Based Thin Film Transistors and Circuits
Author: Haojun LuoAmorphous Indium Gallium Zinc Oxide Thin-film Transistors, Non-volatile Memory and Circuits for Transparent Electronics
Author: Arun SureshDevelopment of Indium Gallium Zinc Oxide Thin Film Transistors on a Softening Shape Memory Polymer for Implantable Neural Interfaces Devices
Author: Ovidio Rodriguez LopezPublisher:
ISBN:
Category : Brain-computer interfaces
Languages : en
Pages :
Book Description
The continuous improvement in electronic active devices has led to several innovations in semiconductor materials, novel deposition methods, and improved microfabrication techniques. In the same way, the implementation of thin-film technology has revolutionized the semiconductor industry. For instance, the field of flexible electronics has utilized novel thin-film electronics components for the fabrication flexible displays, radio frequency identification (RF-ID) tags, and solar cells. Moreover, flexible electronics have sparked a great interest in the field of bioelectronics, for the fabrication of high-spatial-resolution implantable devices for neural interfaces. This incorporation of thin-film technology can potentially enable stimulation and recording the nervous system activity by utilizing novel, minimally invasive, conformal devices. To achieve this, flexible electronics circuits must possess high performance, reliability, and stability, as well as be resilient to mechanical stress and human body conditions, are some of the requirements that flexible electronics must meet for the realization of these devices. Furthermore, the choice of substrates is also critical since it directly affects final properties of the active devices. Substrates, which are mechanically and biologically compliant, are preferred. For this reason, novel, softening materials like thiol-ene polymers are considered in this research. This work centers on the development of Indium-Gallium-Zinc-Oxide (IGZO) thin-film transistors (TFT) using the thiol-ene softening polymer as substrate. Functional IGZO-TFTs were fabricated on top of 50 μm of a thiol-ene/acrylate shape memory polymer (SMP) and electrically characterized. Hafnium oxide (HfO2) deposited at 100°C by atomic layer deposition was used as gate dielectric, and gold (Au) as contacts. The devices were exposed to oxygen, vacuum and forming gas (FG) environments at 250°C to analyze the effects of these atmospheres on the IGZO-TFTs. Improvement in the electrical performance was noticed after the exposure to FG with a significant change in mobility from 0.01 to 30 cm2 V-1s-1, and a reduction in the threshold voltage shift (∆Vth), which it is translated into an increase on stability. Vacuum and oxygen effects were, also analyzed and compared. Furthermore, a time-dependent dielectric breakdown (TDDB) analysis was performed to define the lifetime of the transistors, where a prediction of 10 years at an operational range below 5 V was obtained. Additionally, the TFTs were encapsulated with 5 μm of SMP and exposed to simulated in vivo conditions. Up to 104 bending cycles were performed to the IGZO-TFTs with a bending radius of 5 mm and then, soaked into PBS solution at 37°C for one week to determine the resilience and reliability of the devices. The encapsulated IGZO-TFTs survived to the PBS environment and demonstrated resilience to mechanical deformation with small changes in the electronic properties. The results provided in this research contribute to the development of complex circuitry based on thin-film devices using mechanically adaptive polymers as a flexible substrate and enable the production of multichannel implantable bioelectronics devices.