Effects of Nutrients Conditions and Solids Retention Time (SRT) on Performance and Membrane Fouling of Aerobic Membrane Bioreactors (MBRs) PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Effects of Nutrients Conditions and Solids Retention Time (SRT) on Performance and Membrane Fouling of Aerobic Membrane Bioreactors (MBRs) PDF full book. Access full book title Effects of Nutrients Conditions and Solids Retention Time (SRT) on Performance and Membrane Fouling of Aerobic Membrane Bioreactors (MBRs) by Ling Hao. Download full books in PDF and EPUB format.
Author: Ling Hao Publisher: ISBN: Category : Bioreactors Languages : en Pages : 244
Book Description
"This thesis investigated the effect of chemical oxygen demand (COD) to nitrogen ratio (COD:N) in feed on the biological performance of aerobic membrane bioreactor (MBR). Meanwhile, the effects of nutrients condition (COD:N ratios) and solids retention time (SRT) (7, 12 and 20 days) on sludge properties and their role in membrane fouling were systematically studied using well-controlled aerobic membrane bioreactor receiving a synthetic high strength industrial wastewater containing glucose. The results showed an increased COD:N ratio from 100:5 to 100:2.5 and 100:1.8 had limited impact on COD removal efficiency and further led to a significant improvement in membrane performance, a reduced sludge yield, and improved effluent quality in terms of residual nutrients. The results suggest that an increased COD:N ratio will benefit the industrial wastewater treatment using membrane bioreactors by reducing membrane fouling and sludge yield, saving chemical costs, and reducing secondary hand pollution by nutrients. Membrane performance was improved with an increase in the COD:N ratio (e.g. reduced N dosage). Surface analysis of sludge by X-ray photoelectron spectroscopy (XPS) suggests that significant differences in the surface concentrations of elements C, O and N were observed under different COD:N ratios, implying significant differences in extracellular polymeric substances (EPS) composition. A unique characteristic peak at 1735 cm -1 was observed under nitrogen limitation conditions by using Fourier transform-infrared spectroscopy (FTIR). Total EPS, proteins and the ratio of proteins to carbohydrates in EPS decreased with an increase in COD:N ratio, while carbohydrates in EPS increased with an increase in COD:N ratio. There were no significant differences in the total soluble microbial products (SMPs) but the ratio of proteins to carbohydrates in SMPs decreased with an increase in COD:N ratios. Sludge cake formation was the dominant mechanism of membrane fouling. Membrane performance was improved with an increase in SRT. Surface analysis of sludge by X-ray photoelectron spectroscopy (XPS) suggests that significant differences in the surface concentration of element C and N were observed under different SRTs, implying significant differences in EPS composition. A larger amount of total EPS was found at the lowest SRT (7 days) tested but the ratio of proteins to carbohydrates in EPS increased with an increase in SRT. Similarly, the quantity of SMPs decreased with an increase in SRT but the ratio of proteins to carbohydrates in SMPs increased with an increase in SRT. The quantity of total EPS, total SMPs, and proteins to carbohydrates ratios positively correlated to membrane fouling rates. Sludge cake formation is the dominant mechanisms of membrane fouling."-- from abstract.
Author: Ling Hao Publisher: ISBN: Category : Bioreactors Languages : en Pages : 244
Book Description
"This thesis investigated the effect of chemical oxygen demand (COD) to nitrogen ratio (COD:N) in feed on the biological performance of aerobic membrane bioreactor (MBR). Meanwhile, the effects of nutrients condition (COD:N ratios) and solids retention time (SRT) (7, 12 and 20 days) on sludge properties and their role in membrane fouling were systematically studied using well-controlled aerobic membrane bioreactor receiving a synthetic high strength industrial wastewater containing glucose. The results showed an increased COD:N ratio from 100:5 to 100:2.5 and 100:1.8 had limited impact on COD removal efficiency and further led to a significant improvement in membrane performance, a reduced sludge yield, and improved effluent quality in terms of residual nutrients. The results suggest that an increased COD:N ratio will benefit the industrial wastewater treatment using membrane bioreactors by reducing membrane fouling and sludge yield, saving chemical costs, and reducing secondary hand pollution by nutrients. Membrane performance was improved with an increase in the COD:N ratio (e.g. reduced N dosage). Surface analysis of sludge by X-ray photoelectron spectroscopy (XPS) suggests that significant differences in the surface concentrations of elements C, O and N were observed under different COD:N ratios, implying significant differences in extracellular polymeric substances (EPS) composition. A unique characteristic peak at 1735 cm -1 was observed under nitrogen limitation conditions by using Fourier transform-infrared spectroscopy (FTIR). Total EPS, proteins and the ratio of proteins to carbohydrates in EPS decreased with an increase in COD:N ratio, while carbohydrates in EPS increased with an increase in COD:N ratio. There were no significant differences in the total soluble microbial products (SMPs) but the ratio of proteins to carbohydrates in SMPs decreased with an increase in COD:N ratios. Sludge cake formation was the dominant mechanism of membrane fouling. Membrane performance was improved with an increase in SRT. Surface analysis of sludge by X-ray photoelectron spectroscopy (XPS) suggests that significant differences in the surface concentration of element C and N were observed under different SRTs, implying significant differences in EPS composition. A larger amount of total EPS was found at the lowest SRT (7 days) tested but the ratio of proteins to carbohydrates in EPS increased with an increase in SRT. Similarly, the quantity of SMPs decreased with an increase in SRT but the ratio of proteins to carbohydrates in SMPs increased with an increase in SRT. The quantity of total EPS, total SMPs, and proteins to carbohydrates ratios positively correlated to membrane fouling rates. Sludge cake formation is the dominant mechanisms of membrane fouling."-- from abstract.
Author: Thomas Stephenson Publisher: IWA Publishing ISBN: 1900222078 Category : Science Languages : en Pages : 194
Book Description
The book covers the subject of membrane bioreactors (MBR) for wastewater treatment, dealing with municipal as well as industrial wastewaters. The book details the 3 types of MBR available and discusses the science behind the technology, their design features, operation, applications, advantages, limitations, performance, current research activities and cost. As the demand for wastewater treatment, recycling and re-use technologies increases, it is envisaged that the membrane separation bioreactor will corner the market. Contents Membrane Fundamentals Biological Fundamentals Biomass Separation Membrane Bioreactors Membrane Aeration and Extractive Bioreactors Commercial Membrane Bioreactor Systems Membrane Bioreactor Applications Case Studies
Author: Faisal I. Hai Publisher: IWA Publishing ISBN: 1780400659 Category : Science Languages : en Pages : 484
Book Description
In recent years the MBR market has experienced unprecedented growth. The best practice in the field is constantly changing and unique quality requirements and management issues are regularly emerging. Membrane Biological Reactors: Theory, Modeling, Design, Management and Applications to Wastewater Reuse comprehensively covers the salient features and emerging issues associated with the MBR technology. The book provides thorough coverage starting from biological aspects and fundamentals of membranes, via modeling and design concepts, to practitioners’ perspective and good application examples. Membrane Biological Reactors focuses on all the relevant emerging issues raised by including the latest research from renowned experts in the field. It is a valuable reference to the academic and professional community and suitable for undergraduate and postgraduate teaching in Environmental Engineering, Chemical Engineering and Biotechnology. Editors: Faisal I. Hai, University of Wollongong, Australia Kazuo Yamamoto, University of Tokyo, Japan Chung-Hak Lee, Seoul National University, Korea.
Author: Wallace Woon-Fong Leung Publisher: Butterworth-Heinemann ISBN: 0081026358 Category : Technology & Engineering Languages : en Pages : 503
Book Description
Centrifugal Separations in Biotechnology, Second Edition, is the only book on the market devoted to centrifugal separation in biotechnology. Key topics covered include a full introduction to centrifugation, sedimentation and separation; detailed coverage of centrifuge types, including batch and semi-batch centrifuges, disk-stack and tubular decanter centrifuges; methods for increasing solids concentration; laboratory and pilot testing of centrifuges; selection and sizing centrifuges; scale-up of equipment, performance prediction and analysis of test results using numerical simulation. Centrifugal Separations in Biotechnology, Second Edition, provides guidance on troubleshooting and optimizing centrifuges, and then goes on to explore the commercial applications of centrifuges in biotechnology. It gives detailed process information and data to assist in the development of particular processes from existing systems. It is of value to professionals in the chemical, bioprocess, and biotech sectors, and all those concerned with bioseparation, bioprocessing, unit-operations and process engineering. - Provides a comprehensive guide to centrifuges, their optimal development, and their operation in the biotechnology industry - Updated throughout based on developments in industrial applications and advances in our understanding of centrifugal separations in biotechnology - Discusses applications for the separation of proteins, DNA, mitochondria, ribosomes, lysosomes and other cellular elements - Includes new sections on use of optimal polymer dosage in waste treatment, new centrifuge designs for applications in algae processing, biopharma, and more
Author: Seong-Hoon Yoon Publisher: CRC Press ISBN: 1482255847 Category : Science Languages : en Pages : 436
Book Description
Grasp the Essential Principles of Membrane Bioreactor ProcessesEvolved from the conventional activated sludge (CAS) process, membrane bioreactor (MBR) processes have become the next-generation solution for municipal and industrial wastewater treatment and recycle. Membrane Bioreactor Processes: Principles and Applications explores nearly all the th
Author: Duncan Mara Publisher: Elsevier ISBN: 0080478190 Category : Science Languages : en Pages : 828
Book Description
"Access to safe water is a fundamental human need and therefore a basic human right" --Kofi Annan, United Nations Secretary General Edited by two world-renowned scientists in the field, The Handbook of Water and Wastewater Microbiology provides a definitive and comprehensive coverage of water and wastewater microbiology. With contributions from experts from around the world, this book gives a global perspective on the important issues faced in the provision of safe drinking water, the problems of dealing with aquatic pollution and the processes involved in wastewater management. Starting with an introductory chapter of basic microbiological principles, The Handbook of Water and Wastewater Microbiology develops these principles further, ensuring that this is the essential text for process engineers with little microbiological experience and specialist microbiologists alike. Comprehensive selection of reviews dealing with drinking water and aquatic pollution Provides an understading of basic microbiology and how it is applied to engineering process solutions Suitable for all levels of knowledge in microbiology -from those with no background to specialists who require the depth of information
Author: Jeff Macomber Publisher: ISBN: Category : Languages : en Pages : 172
Book Description
The recent development of less expensive and more efficient ultra-filtration membranes has stimulated a new method of biological waste treatment: membrane bioreactors (MBR). The MBR is a combination of an aeration tank for aerobic biological waste treatment and a membrane unit for physical particulate separation. For wastewater treatment, the MBR process is a modification of the conventional activated sludge process, where a membrane module is used instead of a settling tank to achieve the separation of treated water from the mixed liquor. Wastewater effluent quality is well-monitored for discharge permitting and future regulations will only be more stringent. A treatment system capable of high quality effluent is needed to address future discharge requirements. More recalcitrant compounds such as dyes, pesticides, and other organics are more frequently encountered in treatment processes. Since the ultrafiltration membrane retains these mostly insoluble compounds, their ultimate disposal is controlled and hopefully as less harmful degraded byproducts. The MBR system is capable of effective treatment even for difficult waste streams. In this study, a pilot-scale MBR is operated to investigate the performance of the system in the biodegradation of wastewater containing high molecular weight compounds. Typically, these larger compounds are difficult to treat using conventional methods. Retention of these compounds by the membrane unit improves the chances of microbial degradation. Several solids retention times (SRTs) ranging from 30 days to 2 days will be monitored and the impacts will be evaluated. Biological parameters including microbial diversity, cell viability, and enzymatic activity will be investigated at each SRT. The soluble mixed liquor will be analyzed for several physical/chemical properties throughout the study to evaluate available substrate. Chemical oxygen demand, proteins, and carbohydrates will be analyzed to show the fate of the feed substrates. Effluent quality and treatment efficiency will be studied to assess MBR operation.
Author: Wei-Hsin Chen Publisher: MDPI ISBN: 3038975966 Category : Technology & Engineering Languages : en Pages : 432
Book Description
The subject of this book is “Biofuel and Bioenergy Technology”. It aims to publish high-quality review and research papers, addressing recent advances in biofuel and bioenergy. State-of-the-art studies of advanced techniques of biorefinery for biofuel production are also included. Research involving experimental studies, recent developments, and novel and emerging technologies in this field are covered. This book contains twenty-seven technical papers which cover diversified biofuel and bioenergy technology-related research that have shown critical results and contributed significant findings to the fields of biomass processing, pyrolysis, bio-oil and its emulsification; transesterification and biodiesel, gasification and syngas, fermentation and biogas/methane, bioethanol and alcohol-based fuels, solid fuel and biochar, and microbial fuel cell and power generation development. The published contents relate to the most important techniques and analyses applied in the biofuel and bioenergy technology.
Author: Ling Hao
Author: Ling Hao
Author: Thomas Stephenson
Author: Simon Judd
Author: Faisal I. Hai
Author: Wallace Woon-Fong Leung
Author: Seong-Hoon Yoon
Author: Duncan Mara
Author: Jeff Macomber
Author: Wei-Hsin Chen
Author: Mengni Han