Effects of Multi-pass Friction Stir Processing on Aluminium PDF Download

Author: Kayode Oyindamola
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 155

View

Book Description

Author: Dr. Chandan Deep Singh
Publisher: BookRix
ISBN: 3743849682
Category : Technology & Engineering
Languages : en
Pages : 71

View

Book Description
FSP is manufacturing the Technique used to modify the microstructure metals. In this process a rotating tool is penetrated in the work piece and moved in the transverse direction.Further FSP technique is used for fabrication of surface composite on aluminium substrate and homogenization of powder metallurgy aluminium alloy, metal matrix composites, and the cast aluminium alloys. By this process material properties can be improved due to enhancement of grain structure. With this technique the material have shown good corrosion resistance, high strength and high fatigue resistance.

Author: Nelson Gomes Affonseca (Netto)
Publisher:
ISBN:
Category : Aluminum alloys -- Hardenability
Languages : en
Pages :

View

Book Description
Friction Stir Processing (FSP) is a promising thermomechanical technique that is used to modify the microstructure of metals locally, and thereby locally improve mechanical properties of the material. FSP uses a simple and inexpensive tool, and has been shown to eliminate pores and also reduce the sizes of intermetallics in aluminum alloys. This is of great interest for research on solidification, production and performance of aluminum alloy castings because FSP can enhance the structural quality of aluminum casting significantly by minimizing the effect of those structural defects. In the literature, there is evidence that the effectiveness of FSP can change with tool wear of the tool used. Therefore, a study was first conducted to determine the effect of FSP time on the tool life and wear in 6061-T6 extrusions. Results showed the presence of two distinct phases in the tool life and wear. Metallographic analyses confirmed that wear in Phase I was due to fracture of the threads of the tool and Phase II was due to regular wear, mostly without fracture. Moreover, built-up layers of aluminum were observed between threads. The microhardness profile was found to be different from those reported in the literature for 6061-T6, with Vickers hardness increasing continuously from the the stir zone to the base material. To investigate the degree of effectiveness of FSP in improving the structural quality of cast A356 alloys, ingots with different quality (high and low) were friction strir processed with single and multiple passes. Analysis of tensile test results and work hardening characteristics showed that for the high quality ingot, a single pass was sufficient to eliminate the structural defects. Subsequent FSP passes had no effect on the work hardening characteristics. In contrast, tensile results and work hardening characteristics improved with every pass for the low quality ingot, indicating that the effectiveness of FSP was dependent on the initial quality of the metal. The evolution of microstructure, specifically the size and spacing of Silicon (Si) eutectic particles, was investigated after friction stir processing of high quality A356 castings with single and multiple passes. Si particles were found to coarsen with each pass, which was in contrast with previous findings in the literature. The nearest neighbor distance of Si particles also increased with each FSP pass, indicating that microstructure became progressively more homogeneous after each pass. In the literature, the improvement observed after FSP of Al-Si cast alloys was attributed to the refinement of Si particles. Tensile data from high quality A356 ingot showed that there was no correlation between the size of Si particles and ductility. To the author's knowledge, this is the first time that the absence of a correlation between Si particle size and ductility has been found.

Author: Ranjit Bauri
Publisher: Butterworth-Heinemann
ISBN: 0128137304
Category : Technology & Engineering
Languages : en
Pages : 139

View

Book Description
Metal Matrix Composites by Friction Stir Processing discusses the capabilities of utilizing friction stir processing (FSP) as a tool to manufacture new materials, such as composites. FSP is considered a tool for grain refinement. However, this work illustrates how FSP has a wider capability due to the material flow and mixing the process offers. This book highlights such aspects by demonstrating the ability of the process to incorporate a second phase and make metal matrix composites (MMCs). The book covers the current research on processing MMCs by FSP, and presents a novel approach of making ductile MMCs by FSP using metal particle reinforcements. Demonstrates how friction stir processing can be used to make metal matrix composites Includes a review of different approaches of making metal matrix composites by friction stir processing Demonstrates the utility of friction stir processing in making new types of non-equilibrium ductile composites Provides a comparison of properties of friction stir processed composites to those of conventional metal matrix composites

Author: Lucas F. M. da Silva
Publisher: Springer Nature
ISBN: 9811529574
Category : Science
Languages : en
Pages : 178

View

Book Description
This book presents recent material science-based and mechanical analysis-based advances in joining processes. It includes all related processes, e.g. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints. It gathers selected full-length papers from the 1st Conference on Advanced Joining Processes.

Author: Alexander Vorozhtsov
Publisher: MDPI
ISBN: 3039437372
Category : Science
Languages : en
Pages : 216

View

Book Description
Investigation of the effect of casting and crystallization on the structure and properties of the resulting light alloys and, in particular, research connected with detailed analysis of the microstructure of light alloys obtained using various external influences of ultrasonic, vibration, magnetic, and mechanical processing on the casting and crystallization are discussed. Research on the study of introduction of additives (modifiers, reinforcers, including nanosized ones, etc.) into the melt during the crystallization process, the technological properties of casting (fluidity, segregation, shrinkage, etc.), the structure and physicomechanical properties of light alloys are also included.

Author: Sandeep Rathee
Publisher: John Wiley & Sons
ISBN: 1394169442
Category : Technology & Engineering
Languages : en
Pages : 356

View

Book Description
A single source of information on the fundamental concepts and latest research applications of friction stir welding and processing Friction Stir Welding and Processing: Fundamentals to Advancements provides concise yet comprehensive coverage of the field of friction stir welding, with an eye toward future research directions and applications. Throughout the book, case studies provide real-world context and highlight applications for various engineering sectors. With contributions from an array of leaders in the field, Friction Stir Welding and Processing provides readers with a single source of information on all aspects of FSW and FSP. After explaining the fundamentals of friction stir welding (FSW) and its variants, the book discusses composite fabrication techniques using friction stir processing (FSP). Different types of friction techniques are covered, as is the equipment used. Detailed characterization of samples and composites are included. Additional topics discussed include the impact of FSW on the economics of production, methods for coupling FSW/FSP with additive manufacturing, composite fabrication, and process-property relationships. Master the basic concepts of friction stir welding and its variants Discover the role of FSW in developing hybrid manufacturing techniques Follow case studies that connect theoretical concepts to real-world experimental results Learn from contributions from an array of global thought leaders in the field This is a valuable compendium on the topic for engineers and designers who utilize welding and advanced manufacturing across industries, as well as graduate students and post-graduate researchers who are exploring new friction stir welding applications.

Author: Moataz Attallah
Publisher: LAP Lambert Academic Publishing
ISBN: 9783843380690
Category : Aluminum alloys
Languages : en
Pages : 324

View

Book Description
Friction Stir Welding (FSW) is known to result in a complex microstructural development, with features that remain unexplained, such as: the formation of the onion rings structure. Moreover, various microstructural factors have been suggested to control the strength in Al-Mg AA5xxx welds, without identifying their relative contribution. Furthermore, the influence of the basemetal microstructural parameters (e.g. grains, intermetallic particles, stored energy) on the microstructure-property development has not been previously investigated. These issues are addressed in the present study.

Author: Namrata Gangil
Publisher: CRC Press
ISBN: 1000299031
Category : Technology & Engineering
Languages : en
Pages : 139

View

Book Description
This up-to-date reference text discusses the fabrication technique for strengthening of high specific strength alloys including age-hardened aluminum alloys for several industrial applications. The text presents an exhaustive overview of the materials used in the aircraft construction in general and age-hardened aluminum alloys in particular. The text discusses important concepts including surface composite fabrication using friction stir processing (FSP), FSP tools, effect of reinforcement particles, and conditions that affect strengthening during surface composite fabrication on age-hardened aluminum alloys. The text will facilitate the readers to control parameters and avoid conditions that lead to a net negative impact on the resulting composites and select the one that lead to a net gain. It will enable the readers, researchers, and professionals to plan and practice composite fabrication via FSP with a benefit of net strengthening. The understanding of specific strength of materials used in applications including aerial vehicles and manufacturing is important. The proposed text highlights importance of age-hardened alloy as one of the materials used for diverse applications. It discusses strengthening strategies of existing age-hardened aluminum alloys through composite fabrication via a solid-state FSP route. The text will help students and professionals working in the field of manufacturing, materials science, and aerospace engineering. The text discusses an important aspect of strengthening age-hardened alloy using solid-state friction stir processing for diverse applications in industries including manufacturing and aviation. It will serve as an ideal reference for graduate students, academic researchers, and professionals in the field of mechanical engineering, aerospace engineering, and materials science. It will also be helpful to the professionals working in the aviation and manufacturing industries.

Author: Carlos Agelet de Saracibar
Publisher: MDPI
ISBN: 3039212079
Category : Science
Languages : en
Pages : 146

View

Book Description
This book is a printed edition of the Special Issue Friction Stir Welding and Processing in Alloy Manufacturingthat was published in Metals