Effects of Gate Stress and Parasitic Package Inductance on the Reliability of GaN HEMTs PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Effects of Gate Stress and Parasitic Package Inductance on the Reliability of GaN HEMTs PDF full book. Access full book title Effects of Gate Stress and Parasitic Package Inductance on the Reliability of GaN HEMTs by Cheikh Abdoulahi Tine. Download full books in PDF and EPUB format.
Author: Cheikh Abdoulahi Tine Publisher: ISBN: Category : Gallium nitride Languages : en Pages : 66
Book Description
Recent advances in the development of gallium nitride (GaN) high electron mobility transistor (HEMT) have shown promising results in the application of high frequency power conversion techniques. GaN transistors are emerging as a credible alternative to silicon (Si) devices in multiple power conversion applications. This is mainly because the characteristics of GaN offer higher electron mobility, electron velocity, and higher breakdown voltage compared to (Si) devices. In spite of the promising attributes offered by GaN devices, significant technological readiness level challenges remain, in order for the technology to be adopted pervasively into the market. These challenges relate to the reliability of the material both at the device-physics level, and at the circuit-implementation level. This thesis presents detailed studies on some of the circuit-level reliability phenomena affecting GaN technology. These studies will offer a better understanding of the limitations associated with GaN so that the technology's beneficial aspects can be leveraged. The first reliability investigation performed was related to a comparison of two 600 V GaN HEMTs based on the same die, however packaged in two different configurations. In order to characterize the performance of the GaN HEMT, a realistic behavioral simulation model was developed in this thesis. The model takes into consideration both the static and dynamic characteristics of the HEMT including drain current variations with respect to gate voltage and drain voltage, ON resistance, intrinsic capacitances, and reverse recovery current and charge. The model was also integrated with values for the per-terminal parasitic package inductances. These values were obtained through empirical measurement. The modeled transistor was then simulated in a converter to analyze the overall performance of the system. Experimental results verified the results obtained by the model. This study thus presents a framework to project and assess the effect of each parasitic inductance on the performance of next generation GaN devices. In the second reliability study, the effect of gate-stress on the performance of normally-off GaN HEMT devices in a boost converter was investigated. The converter's efficiency, output voltage stability, and gate current were evaluated in order to scrutinize the failure mechanisms of pGaN gated lateral GaN devices under high gate stress. It was observed that the transient overshoot of the gate voltage during turn-on becomes switching frequency-dependent once the device has suffered sufficient degradation, leading to a marked decline in converter performance. This observation has not been reported in the previous literature. This improved understanding may allow mitigation of degradation mechanisms in GaN at the fabrication, packaging, and circuit implementation level. The results of this thesis are beneficial in two ways. First it offers insights into the safe and reliable implementation of GaN devices at the circuits-level, thus obviating the need to trade device performance for device safety. Secondly, the gate-stressing investigation unveils degradation characteristics that are of critical importance to the design and fabrication of next generation GaN devices.
Author: Cheikh Abdoulahi Tine Publisher: ISBN: Category : Gallium nitride Languages : en Pages : 66
Book Description
Recent advances in the development of gallium nitride (GaN) high electron mobility transistor (HEMT) have shown promising results in the application of high frequency power conversion techniques. GaN transistors are emerging as a credible alternative to silicon (Si) devices in multiple power conversion applications. This is mainly because the characteristics of GaN offer higher electron mobility, electron velocity, and higher breakdown voltage compared to (Si) devices. In spite of the promising attributes offered by GaN devices, significant technological readiness level challenges remain, in order for the technology to be adopted pervasively into the market. These challenges relate to the reliability of the material both at the device-physics level, and at the circuit-implementation level. This thesis presents detailed studies on some of the circuit-level reliability phenomena affecting GaN technology. These studies will offer a better understanding of the limitations associated with GaN so that the technology's beneficial aspects can be leveraged. The first reliability investigation performed was related to a comparison of two 600 V GaN HEMTs based on the same die, however packaged in two different configurations. In order to characterize the performance of the GaN HEMT, a realistic behavioral simulation model was developed in this thesis. The model takes into consideration both the static and dynamic characteristics of the HEMT including drain current variations with respect to gate voltage and drain voltage, ON resistance, intrinsic capacitances, and reverse recovery current and charge. The model was also integrated with values for the per-terminal parasitic package inductances. These values were obtained through empirical measurement. The modeled transistor was then simulated in a converter to analyze the overall performance of the system. Experimental results verified the results obtained by the model. This study thus presents a framework to project and assess the effect of each parasitic inductance on the performance of next generation GaN devices. In the second reliability study, the effect of gate-stress on the performance of normally-off GaN HEMT devices in a boost converter was investigated. The converter's efficiency, output voltage stability, and gate current were evaluated in order to scrutinize the failure mechanisms of pGaN gated lateral GaN devices under high gate stress. It was observed that the transient overshoot of the gate voltage during turn-on becomes switching frequency-dependent once the device has suffered sufficient degradation, leading to a marked decline in converter performance. This observation has not been reported in the previous literature. This improved understanding may allow mitigation of degradation mechanisms in GaN at the fabrication, packaging, and circuit implementation level. The results of this thesis are beneficial in two ways. First it offers insights into the safe and reliable implementation of GaN devices at the circuits-level, thus obviating the need to trade device performance for device safety. Secondly, the gate-stressing investigation unveils degradation characteristics that are of critical importance to the design and fabrication of next generation GaN devices.
Author: Shankar Dhakal Publisher: ISBN: Category : Gallium nitride Languages : en Pages : 73
Book Description
The recent development in the wide bandgap (WBG) semiconductor devices such as gallium nitride (GaN) has pushed the limit for the next generation power electronics in terms of high frequency switching applications with high power density. GaN devices have shown promising theoretical advantages such as large bandgap, breakdown field and electron saturation velocity, thereby presenting GaN as an effective alternative for Silicon in high power, temperature and frequency switching applications. Despite having numerous advantages over silicon, GaN technology has suffered with various device level as well as circuit level challenges. Although the very low inherent capacitance of the GaN is one of the most important attributes of the device, it can become disruptive in the presence of significant parasitic circuit inductance. Due to the high sensitivity of these capacitances and their interaction with the parasitic circuit components, undesirable transient events resulting in circuit deterioration can occur. In this thesis work, circuit level reliability issues of GaN due to high VGS stress and high frequency switching has been analyzed with emphasis on external circuit parasitics. The research study targets three important aspects of circuit level reliability issues in a GaN HEMT. It begins with 1. determination of degradation parameters, followed by 2. effect of external gate resistance over degradation parameters and finally 3. analysis of device degradation mechanism with respect to high VGS stress under zero input bias (VDS = 0). A simulation study is also developed to predict the VGS overshoot for a specific gate voltage with respect to parasitic inductance. For this purpose, a 100 V, "EPC-8010" normally off GaN HEMT has been modeled and utilized in SaberRD environment. The VGS overshoot obtained from SaberRD model are then verified with experimental results. In conjunction, a boost converter has been designed and built for experimentation to assess the degradation mechanism in the device. As a part of the experiment, frequency sweep, time stress and DC gate bias tests have been performed to scrutinize the degradation parameters of the device. In addition, degraded GaN devices have been re-tested in the frequency sweep test to analyze the recovery behavior of the device. The results have revealed a close relationship between VGS overshoot, gate current and efficiency pre, post and during degradation which can be very useful to develop a probabilistic model to predict the device failure.
Author: Hadhemi Lakhdhar Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This Ph.D. work focuses on the reliability assessment of ultra-short gate AlGaN/GaN high electron mobility transistor (HEMT) on silicon substrate dedicated to power applications at frequency above 40GHz. It was carried out within IMS Bordeaux and IEMN Lille laboratories.This work initially compares AlGaN/GaN HEMTs grown by MOCVD with those grown using MBE, through electrical characterization.In particular, the device geometry impact on the device performances has been studies by static electrical characterization.Step-stress experiments are performed to investigate reliability assessment of ultra-short gate AlGaN/GaN high electron mobility transistor (HEMT) on Si substrate. A methodology based on a sequence of step stress tests has been defined for in-situ diagnosis of a permanent degradation and of a degradation which is identified by a drain current transient occurring during each step of the ageing sequence . The same stress conditions were applied on HEMTs with different geometries. It is found no evolution of the drain current during non stressful steps. The value of the critical degradation voltage beyond which the stress drain current starts to decrease significantly is also found dependent on the stress bias conditions, the gate-drain distance and the gate length. Moreover, the safe operating area of this technology has been determined.
Author: Andrew Daniel Koehler Publisher: ISBN: Category : Languages : en Pages :
Book Description
Repeatable gauge factors of an AlGaN/GaN HEMT device were obtained after eliminating parasitic charge trapping effects. Over four orders of magnitude of variation in gauge factors are reported in literature. Charge traps are likely responsible for the huge discrepancy. By employing continuous sub-bandgap optical excitation, the effect of non-repeatable charge trapping transients was effectively minimized, allowing the gauge factor to be accurately measured. The measured gauge factor is compared to a simulated gauge factor, calculated from stress-induced changes in the 2DEG sheet carrier density and mobility.
Author: Matteo Meneghini Publisher: Springer ISBN: 3319431994 Category : Technology & Engineering Languages : en Pages : 383
Book Description
This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Author: Mehdi Rzin Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
This thesis is in the framework of two projects: ReAGaN and Extreme GaN withindustrials (UMS, Serma Technologies, Thales TRT) and academics (LEPMI, LAAS andUniversity of Bristol).The studied AlGaN/GaN HEMTs are provided by the society United MonolithicSemiconductors (UMS) from the GH50 and GH25 GaN processes that were qualified duringthis thesis. Many devices were submitted to high temperature accelerated life tests by UMSand characterized at IMS laboratory to study the parasitic effects and degradationsmechanisms that are limiting the electrical reliability of GaN based HEMTs technology.The first chapter gives an overview of the basics of GaN based high electron mobilitytransistors (HEMTs). Gallium Nitride material features are reviewed as well as substratessuited for GaN based devices. GaN market in Europe and the main industrial actors are listed.Furthermore, the structure and operation of GaN based HEMTs are described. In the last part,the two UMS GaN processes are described.The second chapter presents the life tests that are used for reliability studies. State of theart of parasitic effects and degradation mechanisms of AlGaN/GaN HEMTs is given.Furthermore, the ReAGaN project in which the main part of this thesis is involved isdescribed. The electrical characterization techniques used at IMS during this thesis arepresented.The third chapter is divided into four case studies; three case studies are in theframework of ReAGaN project and the fourth one in the Extreme GaN project. In the firstcase study, we investigate the conduction mechanisms inducing the leakage current inAlGaN/GaN HEMTs issued from GH50 process. The second case study is dedicated to thestudy of an electrical parasitic effect that appears on the Schottky diode forward characteristicafter temperature accelerated life tests. In the third case study, we study the influence of Almole fraction on the DC electrical parameters of AlGaN/GaN HEMTs. The last case studyconsists in the determination of the limits and safe operating area (SOA) of UMS GH25 GaNHEMTs by carrying out the two and three terminal breakdown voltages measurements.
Author: Alex Lidow Publisher: John Wiley & Sons ISBN: 1119594421 Category : Science Languages : en Pages : 470
Book Description
An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.
Author: Farid Medjdoub Publisher: MDPI ISBN: 3036505660 Category : Technology & Engineering Languages : en Pages : 242
Book Description
Emerging wide bandgap (WBG) semiconductors hold the potential to advance the global industry in the same way that, more than 50 years ago, the invention of the silicon (Si) chip enabled the modern computer era. SiC- and GaN-based devices are starting to become more commercially available. Smaller, faster, and more efficient than their counterpart Si-based components, these WBG devices also offer greater expected reliability in tougher operating conditions. Furthermore, in this frame, a new class of microelectronic-grade semiconducting materials that have an even larger bandgap than the previously established wide bandgap semiconductors, such as GaN and SiC, have been created, and are thus referred to as “ultra-wide bandgap” materials. These materials, which include AlGaN, AlN, diamond, Ga2O3, and BN, offer theoretically superior properties, including a higher critical breakdown field, higher temperature operation, and potentially higher radiation tolerance. These attributes, in turn, make it possible to use revolutionary new devices for extreme environments, such as high-efficiency power transistors, because of the improved Baliga figure of merit, ultra-high voltage pulsed power switches, high-efficiency UV-LEDs, and electronics. This Special Issue aims to collect high quality research papers, short communications, and review articles that focus on wide bandgap device design, fabrication, and advanced characterization. The Special Issue will also publish selected papers from the 43rd Workshop on Compound Semiconductor Devices and Integrated Circuits, held in France (WOCSDICE 2019), which brings together scientists and engineers working in the area of III–V, and other compound semiconductor devices and integrated circuits. In particular, the following topics are addressed: – GaN- and SiC-based devices for power and optoelectronic applications – Ga2O3 substrate development, and Ga2O3 thin film growth, doping, and devices – AlN-based emerging material and devices – BN epitaxial growth, characterization, and devices
Author: Carmine Ciofi Publisher: Springer Nature ISBN: 3031487117 Category : Technology & Engineering Languages : en Pages : 469
Book Description
This book showcases the state of the art in the field of electronics, as presented by researchers and engineers at the 54th Annual Meeting of the Italian Electronics Society (SIE), held in Noto (SR), Italy, on September 6–8, 2023. It covers a broad range of aspects, including: integrated circuits and systems, micro- and nano-electronic devices, microwave electronics, sensors and microsystems, optoelectronics and photonics, power electronics, electronic systems and applications.
Author: Cheikh Abdoulahi Tine
Author: Cheikh Abdoulahi Tine
Author: Shankar Dhakal
Author: Hadhemi Lakhdhar
Author: Andrew Daniel Koehler
Author: Matteo Meneghini
Author: Mehdi Rzin
Author: Alex Lidow
Author: Cungang Hu
Author: Farid Medjdoub
Author: Carmine Ciofi