Effects of Anisotropic Versus Isotropic Consolidation in Consolidated-undrained Triaxial Compression Tests of Cohesive Soils PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Effects of Anisotropic Versus Isotropic Consolidation in Consolidated-undrained Triaxial Compression Tests of Cohesive Soils PDF full book. Access full book title Effects of Anisotropic Versus Isotropic Consolidation in Consolidated-undrained Triaxial Compression Tests of Cohesive Soils by Frank C. Townsend. Download full books in PDF and EPUB format.
Author: Frank C. Townsend Publisher: ISBN: Category : Soils Languages : en Pages : 130
Book Description
The results of a series of consolidated-undrained (CU) triaxial compression tests performed on normally consolidated and overconsolidated specimes of two clays consolidated both isotropically (ICU tests) and anisotropically (ACU tests) are presented and analyzed in this report. The specimens were trimmed from samples of Vicksburg Buckshot clay (LL = 57) and a clay from the East Atchafalaya Basin Protection Levee (EABPL) project area (LL = 79), both of which had been consolidated from a slurry in large-diameter consolidometers under a maximum vertical consolidation pressure of 3.0 kg/sq cm. Data presented include stress-strain curves, pore pressure observations, final water content distributions within the specimens, and shear strength envelopes based on total and effective stresses. Test results indicate that the change in volume during consolidation and the water content at the end of consolidation are not a unique function of the vertical consolidation stresses but are related to the mean effective consolidation stress. Total stress envelopes based on Taylor's method of deriving strengths of anisotropically consolidated specimens from test results obtained from isotropically consolidated specimens slightly underestimate observed values. In this context, Taylor's method is an appropriate means of predicting strengths for various K sub c ratios from conventional ICU tests. Use of hyperbolic stress-strain relationships derived from ICU tests in finite element codes for ACU conditions will lead to erroneous results. Further testing of anisotropically consolidated soils under stress systems that better simulate in situ conditions is needed.
Author: Frank C. Townsend Publisher: ISBN: Category : Soils Languages : en Pages : 130
Book Description
The results of a series of consolidated-undrained (CU) triaxial compression tests performed on normally consolidated and overconsolidated specimes of two clays consolidated both isotropically (ICU tests) and anisotropically (ACU tests) are presented and analyzed in this report. The specimens were trimmed from samples of Vicksburg Buckshot clay (LL = 57) and a clay from the East Atchafalaya Basin Protection Levee (EABPL) project area (LL = 79), both of which had been consolidated from a slurry in large-diameter consolidometers under a maximum vertical consolidation pressure of 3.0 kg/sq cm. Data presented include stress-strain curves, pore pressure observations, final water content distributions within the specimens, and shear strength envelopes based on total and effective stresses. Test results indicate that the change in volume during consolidation and the water content at the end of consolidation are not a unique function of the vertical consolidation stresses but are related to the mean effective consolidation stress. Total stress envelopes based on Taylor's method of deriving strengths of anisotropically consolidated specimens from test results obtained from isotropically consolidated specimens slightly underestimate observed values. In this context, Taylor's method is an appropriate means of predicting strengths for various K sub c ratios from conventional ICU tests. Use of hyperbolic stress-strain relationships derived from ICU tests in finite element codes for ACU conditions will lead to erroneous results. Further testing of anisotropically consolidated soils under stress systems that better simulate in situ conditions is needed.
Author: Amit Prashant Publisher: Springer Nature ISBN: 9811508860 Category : Science Languages : en Pages : 735
Book Description
This volume presents selected papers from IACMAG Symposium,The major themes covered in this conference are Earthquake Engineering, Ground Improvement and Constitutive Modelling. This volume will be of interest to researchers and practitioners in geotechnical and geomechanical engineering.
Author: Robert T. Donaghe Publisher: ASTM International ISBN: 0803109830 Category : Anisotropy Languages : en Pages : 896
Book Description
"Although the triaxial compression test is presently the most widely used procedure for determining strength and stress-deformation properties of soils, there have been no books published on triaxial testing since the 1962 second edition of the landmark work The Measurement of Soil Properties in the Triaxial Test by Bishop and Henkel. It is apparent there is a need to document advances made in triaxial testing since publication of Bishop and Henkel's book and to examine the current state of the art in a forum devoted solely to triaxial testing. Because of increasing versatility brought about by recent developments in testing techniques and equipment, it is also important that the geotechnical profession be provided with an up-to-date awareness of potential uses for the triaxial test."--Overview.
Author: A.K.L. Kwong Publisher: Routledge ISBN: 1351416170 Category : Technology & Engineering Languages : en Pages : 730
Book Description
This volume contains seven keynote lectures and over 100 technical contributions by scientists, researchers, engineers and students from more than 25 countries and regions worldwide on the subject of soft soil engineering.
Author: Jay Ameratunga Publisher: Springer ISBN: 8132226291 Category : Science Languages : en Pages : 236
Book Description
This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Author: PoulV. Lade Publisher: Routledge ISBN: 1351424475 Category : Technology & Engineering Languages : en Pages : 385
Book Description
The workshop aims to provide a fundamental understanding of the liquefaction process, necessary to the enhancement of liquefaction prediction. The contributions are divided into eight sections, which include: factors affecting liquefaction susceptibility and field studies of liquefaction.
Author: Frank C. Townsend
Author: Frank C. Townsend
Author: Amit Prashant
Author: Robert T. Donaghe
Author: U.S. Army Engineer Waterways Experiment Station
Author: 
Author: Rose Mary Peck
Author: A.K.L. Kwong
Author: Jay Ameratunga
Author: PoulV. Lade
Author: Babu T. Jose