Author: Herbert W. Scibbe
Publisher:
ISBN:
Category : Gearing
Languages : en
Pages : 20
Book Description
Effect of Lubricant Extreme-pressure Additives on Surface Fatigue Life of AISI 9310 Spur Gears
Author: Herbert W. Scibbe
Publisher:
ISBN:
Category : Gearing
Languages : en
Pages : 20
Book Description
Publisher:
ISBN:
Category : Gearing
Languages : en
Pages : 20
Book Description
Effect of Lubricant Extreme-pressure Additives on Surface Fatigue Life of AISI 9310 Spur Gears
Author: Herbert W. Scibbe
Publisher:
ISBN:
Category : Gearing
Languages : en
Pages : 20
Book Description
Publisher:
ISBN:
Category : Gearing
Languages : en
Pages : 20
Book Description
Effect of Five Lubricants on Life of AISI 9310 Spur Gears
Author: Dennis P. Townsend
Publisher:
ISBN:
Category : Gearing, Spur
Languages : en
Pages : 20
Book Description
Publisher:
ISBN:
Category : Gearing, Spur
Languages : en
Pages : 20
Book Description
Effect of Five Lubricants on Life of AISI 9310 Spur Gears
Effect of Two Synthetic Lubricants on Life of AISI 9310 Spur Gears
Surface Fatigue Lives of Case-Carburized Gears With an Improved Surface Finish
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 18
Book Description
Previous research provides qualitative evidence that an improved surface finish can increase the surface fatigue lives of gears. To quantify the influence of surface roughness on life, a set of AISI 9310 steel gears was provided with a near-mirror finish by superfinishing. The effects of the superfinishing on the quality of the gear tooth surfaces were determined using data from metrology, profilometry, and interferometric microscope inspections. The superfinishing reduced the roughness average by about a factor of 5. The superfinished gears were subjected to surface fatigue testing at 1.71-GPa (248-ksi) Hertz contact stress, and the data were compared with the NASA Glenn gear fatigue data base. The lives of gears with superfinished teeth were about four times greater compared with the lives of gears with ground teeth but with otherwise similar quality.
Publisher:
ISBN:
Category :
Languages : en
Pages : 18
Book Description
Previous research provides qualitative evidence that an improved surface finish can increase the surface fatigue lives of gears. To quantify the influence of surface roughness on life, a set of AISI 9310 steel gears was provided with a near-mirror finish by superfinishing. The effects of the superfinishing on the quality of the gear tooth surfaces were determined using data from metrology, profilometry, and interferometric microscope inspections. The superfinishing reduced the roughness average by about a factor of 5. The superfinished gears were subjected to surface fatigue testing at 1.71-GPa (248-ksi) Hertz contact stress, and the data were compared with the NASA Glenn gear fatigue data base. The lives of gears with superfinished teeth were about four times greater compared with the lives of gears with ground teeth but with otherwise similar quality.
NASA Technical Paper
Effect of Shot Peening on Surface Fatigue Life of Carburized and Hardened AISI 9310 Spur Gears
Author: Dennis P. Townsend
Publisher:
ISBN:
Category : Gearing
Languages : en
Pages : 20
Book Description
Publisher:
ISBN:
Category : Gearing
Languages : en
Pages : 20
Book Description
Scientific and Technical Aerospace Reports
Comparison of Pitting Fatigue Life of Ausforged and Standard Forged AISI M-50 and AISI 9310 Spur Gears
Author: Dennis P. Townsend
Publisher:
ISBN:
Category : Gearing, Spur
Languages : en
Pages : 36
Book Description
Publisher:
ISBN:
Category : Gearing, Spur
Languages : en
Pages : 36
Book Description