Author: Gerald W. Long
Publisher:
ISBN:
Category : Machine-tools
Languages : en
Pages : 320
Book Description
Effect and Control of Chatter Vibrations in Machine Tool Process
Author: Gerald W. Long
Publisher:
ISBN:
Category : Machine-tools
Languages : en
Pages : 320
Book Description
Publisher:
ISBN:
Category : Machine-tools
Languages : en
Pages : 320
Book Description
Effect and Control of Chatter Vibrations in Machine Tool Process
Author: Jason R. Lemon
Publisher:
ISBN:
Category : Machine-tools
Languages : en
Pages : 81
Book Description
Publisher:
ISBN:
Category : Machine-tools
Languages : en
Pages : 81
Book Description
Effect and Control of Chatter Vibrations in Machine Tool Process
Effect and Control of Chatter Vibrations in Machine Tool Process
Effect and Control of Chatter Vibrations in Machine Tool Process
Author: Gerald W. Long
Publisher:
ISBN:
Category :
Languages : en
Pages : 277
Book Description
A theory is formulated using a feedback loop to represent the chatter mechanism. This theory permits the calculation of borderlines of stability for a machine tool system having a structure with n-degrees of freedom. A cutting stiffness table is presented in which data from the literature are given in a form of cutting stiffness per unit width of cut for various materials. The dynamic behavior of the cutting process is explored in depth yielding an understanding and qualitative description of observed dynamic behavior. The theory of transfer functions of structures has been derived enabling the prediction of structure dynamics of simple continuous systems. Measured and computed stability diagrams are presented demonstrating the validity of the developed stability theory. From the research program initial chatter specifications have been formulated. Such a specification, if established, would define the ratio of minimum directional dynamic stiffness of the structure over the rated horsepower of the machine tool. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 277
Book Description
A theory is formulated using a feedback loop to represent the chatter mechanism. This theory permits the calculation of borderlines of stability for a machine tool system having a structure with n-degrees of freedom. A cutting stiffness table is presented in which data from the literature are given in a form of cutting stiffness per unit width of cut for various materials. The dynamic behavior of the cutting process is explored in depth yielding an understanding and qualitative description of observed dynamic behavior. The theory of transfer functions of structures has been derived enabling the prediction of structure dynamics of simple continuous systems. Measured and computed stability diagrams are presented demonstrating the validity of the developed stability theory. From the research program initial chatter specifications have been formulated. Such a specification, if established, would define the ratio of minimum directional dynamic stiffness of the structure over the rated horsepower of the machine tool. (Author).
The Effect and Control of Chatter Vibrations in Machine Tool Processes
Author: Gerald W. Long
Publisher:
ISBN:
Category :
Languages : en
Pages : 306
Book Description
This project has been engaged in a manufacturing methods program which was directed at the problem of resolving the theory of self-excited chatter such that it would encompass milling operations, in addition to turning and drilling operations. Concurrent with this investigation, parallel tasks were conducted to investigate analytical techniques that could be used to predict the static and dynamic characteristics of machine tool structures at the drawing stage, to investigate observed phenomena of the cutting process associated with metal cutting dynamics, and to investigate techniques whereby chatter specifications could be formulated and used to measure the chatter-free performance of machine tools. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 306
Book Description
This project has been engaged in a manufacturing methods program which was directed at the problem of resolving the theory of self-excited chatter such that it would encompass milling operations, in addition to turning and drilling operations. Concurrent with this investigation, parallel tasks were conducted to investigate analytical techniques that could be used to predict the static and dynamic characteristics of machine tool structures at the drawing stage, to investigate observed phenomena of the cutting process associated with metal cutting dynamics, and to investigate techniques whereby chatter specifications could be formulated and used to measure the chatter-free performance of machine tools. (Author).
Effect and control of chatter vibrations in machine tool processes
Author: Herwart Opitz
Publisher:
ISBN:
Category :
Languages : en
Pages : 69
Book Description
The report contains a program of research which is directed at the problem of determining the dynamic stability of machine tool-metal cutting systems. Such a study will provide machine tool manufacturers with the necessary analytical methods tests and specification techniques to determine a vibration free cutting for machine tools. The special advantage of the system analysis by means of stochastic signals is the natural kind of stressing during the record of signals for the dynamic compliance test. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 69
Book Description
The report contains a program of research which is directed at the problem of determining the dynamic stability of machine tool-metal cutting systems. Such a study will provide machine tool manufacturers with the necessary analytical methods tests and specification techniques to determine a vibration free cutting for machine tools. The special advantage of the system analysis by means of stochastic signals is the natural kind of stressing during the record of signals for the dynamic compliance test. (Author).
Effect and Control of Chatter Vibration in Machine Tool Processes
Author: Karl G. Mueller
Publisher:
ISBN:
Category :
Languages : en
Pages : 159
Book Description
To determine the dynamic behaviour of gear drives under preload and under running conditions an electrohydraulic rotatory exciter was built and tested on a 18 stage milling machine gear box. Using this device the natural frequencies, dynamic flexibilities and the degree of damping for the drive are determined. Using a digital computer programme the values of natural frequencies and static flexibilities are also computed and the results of measurement and calculation are compared. To determine the dynamics of the cutting process an equipment consisting of a cutting force dynamometer, relative displacement pick up, electromagnetic exciter of high force capability, power supply to the exciter and an electronic device for the instantaneous measurement of transfer function were developed. The performance characteristics of this set up are presented. Besides these special problems, an examination was made as to how far a special method of description, computation and measurement ('Multiplex'-description) developed for the investigation of the stiffness and stability of machine tools will be suitable as a basis for the development of acceptability standards for machine tools and practicability of this method was confirmed. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 159
Book Description
To determine the dynamic behaviour of gear drives under preload and under running conditions an electrohydraulic rotatory exciter was built and tested on a 18 stage milling machine gear box. Using this device the natural frequencies, dynamic flexibilities and the degree of damping for the drive are determined. Using a digital computer programme the values of natural frequencies and static flexibilities are also computed and the results of measurement and calculation are compared. To determine the dynamics of the cutting process an equipment consisting of a cutting force dynamometer, relative displacement pick up, electromagnetic exciter of high force capability, power supply to the exciter and an electronic device for the instantaneous measurement of transfer function were developed. The performance characteristics of this set up are presented. Besides these special problems, an examination was made as to how far a special method of description, computation and measurement ('Multiplex'-description) developed for the investigation of the stiffness and stability of machine tools will be suitable as a basis for the development of acceptability standards for machine tools and practicability of this method was confirmed. (Author).
Technical Abstract Bulletin
An Investigation of Computer Control of Chatter in Machining
Author: Tirukonda Lankaram Subramanian
Publisher:
ISBN:
Category : Machine tolols
Languages : en
Pages : 292
Book Description
Publisher:
ISBN:
Category : Machine tolols
Languages : en
Pages : 292
Book Description