Edge Transport Barrier Studies on the Alcator C-Mod Tokamak PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Edge Transport Barrier Studies on the Alcator C-Mod Tokamak PDF full book. Access full book title Edge Transport Barrier Studies on the Alcator C-Mod Tokamak by Jerry Wayne Hughes. Download full books in PDF and EPUB format.
Author: Jerry Wayne Hughes Publisher: ISBN: Category : Languages : en Pages : 452
Book Description
Edge transport barriers (ETBs) in tokamak plasmas accompany transitions from low confinement (L-mode) to high confinement (H-mode) and exhibit large density and temperature gradients in a narrow pedestal region near the last closed flux surface (LCFS). Because tokamak energy confinement depends strongly on the boundary condition imposed by the edge plasma pressure, one desires a predictive capability for the pedestal on a future tokamak. On Alcator C-Mod, significant contributions to ETB studies were made possible with edge Thomson scattering (ETS), which measures profiles of electron temperature (20 [leq] Te[eV] [leq] 800) and density (0.3 [leq] ne[10^20m^-3] [leq] 5) with 1.3-mm spatial resolution near the LCFS. Profiles of Te, ne, and pe = neTe are fitted with a parameterized function, revealing typical pedestal widths [delta] of 2-6mm, with [delta]Te [geq] [delta]ne , on average. Pedestals are examined to determine existence criteria for the enhanced D[alpha] (EDA) H-mode. A feature that distinguishes this regime is a quasi-coherent mode (QCM) near the LCFS. The presence or absence of the QCM is related to edge conditions, in particular density, temperature and safety factor q. Results are consistent with higher values of both q and collisionality [nu]* giving the EDA regime. Further evidence suggests that increased abs([nabla]pe) may favor the QCM; thus EDA may have relevance to low-[nu]* reactor regimes, should sufficient edge pressure gradient exist.
Author: Jerry Wayne Hughes Publisher: ISBN: Category : Languages : en Pages : 452
Book Description
Edge transport barriers (ETBs) in tokamak plasmas accompany transitions from low confinement (L-mode) to high confinement (H-mode) and exhibit large density and temperature gradients in a narrow pedestal region near the last closed flux surface (LCFS). Because tokamak energy confinement depends strongly on the boundary condition imposed by the edge plasma pressure, one desires a predictive capability for the pedestal on a future tokamak. On Alcator C-Mod, significant contributions to ETB studies were made possible with edge Thomson scattering (ETS), which measures profiles of electron temperature (20 [leq] Te[eV] [leq] 800) and density (0.3 [leq] ne[10^20m^-3] [leq] 5) with 1.3-mm spatial resolution near the LCFS. Profiles of Te, ne, and pe = neTe are fitted with a parameterized function, revealing typical pedestal widths [delta] of 2-6mm, with [delta]Te [geq] [delta]ne , on average. Pedestals are examined to determine existence criteria for the enhanced D[alpha] (EDA) H-mode. A feature that distinguishes this regime is a quasi-coherent mode (QCM) near the LCFS. The presence or absence of the QCM is related to edge conditions, in particular density, temperature and safety factor q. Results are consistent with higher values of both q and collisionality [nu]* giving the EDA regime. Further evidence suggests that increased abs([nabla]pe) may favor the QCM; thus EDA may have relevance to low-[nu]* reactor regimes, should sufficient edge pressure gradient exist.
Author: Jerry Wayne Hughes Publisher: ISBN: Category : Languages : en Pages : 52
Book Description
Edge transport barrier (ETB) studies on the Alcator C-Mod tokamak [Phys. Plasmas 1, 1511, (1994)] investigate pedestal scalings and radial transport of plasma and neutrals. Pedestal profiles show trends with plasma operational parameters such as total current IP . A ballooning-like I2P dependence is seen in the pressure gradient, despite calculated stability to ideal ballooning modes. A similar scaling is seen in the near scrape-off-layer for both low-confinement (L-mode) and H-mode discharges, possibly due to electromagnetic fluid drift turbulence setting transport near the separatrix. Neutral density diagnosis allows examination of D0 fueling in H-modes, yielding profiles of effective particle diffusivity in the ETB, which vary as IP is changed. Edge neutral transport is studied using a 1D kinetic treatment. In both experiment and modeling, the C-Mod density pedestal exhibits a weakly increasing pedestal density and a nearly invariant density pedestal width as the D0 source rate increases. Identical modeling performed on pedestal profiles typical of DIII-D [Nucl. Fusion 42, 614, (2002)] reveal differences in pedestal scalings qualitatively similar to experimental results.
Author: Kirill Zhurovich Publisher: ISBN: Category : Languages : en Pages : 185
Book Description
Internal transport barriers (ITBs) in tokamak plasmas are characterized by the reduction of transport in one or more of the particle, momentum, or energy channels in the core plasma region. On Alcator C-Mod, significant contributions to ITB studies were made possible with the core Thomson scattering (TS) diagnostic, which measures profiles of electron temperature (0.03
Author: Stephen J. Wukitch Publisher: ISBN: Category : Languages : en Pages : 42
Book Description
Double transport barrier modes (simultaneous core and edge transport barrier) have been observed with off-axis ion cyclotron range of frequencies (ICRF) heating in the Alcator C-Mod tokamak [I.H. Hutchinson et al., Phys. Plasmas 1, 1511(1994)]. An internal transport barrier (ITB) is routinely produced in enhanced D[alpha] H-mode (EDA) discharges where the minority ion cyclotron resonance layer is at r/a (0.5) during the current flat top phase of the discharge. The density profile becomes peaked without the presence of a particle source in the plasma core and continues to peak until the increased core impurity radiation arrests the improved energy confinement, ultimately leading to a barrier collapse. With the addition of moderate (0.6 MW) central ICRF heating, the double barrier mode was maintained for as long as the ICRF power was applied and modeling shows that the internal thermal barrier was maintained throughout the discharge. The presence of sawteeth throughout most of the ITB discharge allows sawtooth induced heat pulse analysis to be performed. This analysis indicates that there is an abrupt radial discontinuity in the heat pulse time to peak profile when an ITB is present. Furthermore, this discontinuity appears to move into the core plasma from the edge region in about 0.2 sec, several confinement times. The deduced thermal diffusivity, Xhp indicates a barrier exists in the electron thermal transport, the barrier is limited to a narrow radial region, and the transport is unaffected outside this narrow radial extent.
Author: Publisher: ISBN: Category : Languages : en Pages : 30
Book Description
Results from recent experiments on the DIII-D tokamak have revealed many important details on transport barriers at the plasma edge and in the plasma core. These experiments include: (a) the formation of the H-mode edge barrier directly by pellet injection; (b) the formation of a quiescent H-mode edge barrier (QH-mode) which is free from edge localized modes (ELMs), but which still exhibits good density and radiative power control; (c) the formation of multiple transport barriers, such as the quiescent double barrier (QDB) which combines a internal transport barrier with the quiescent H-mode edge barrier. Results from the pellet-induced H-mode experiments indicate that: (a) the edge temperature (electron or ion) is not a critical parameter for the formation of the H-mode barrier, (b) pellet injection leads to an increased gradient in the radial electric field, E{sub r}, at the plasma edge; (c) the experimentally determined edge parameters at barrier transition are well below the predictions of several theories on the formation of the H-mode barrier, (d) pellet injection can lower the threshold power required to form the H-mode barrier. The quiescent H-mode barrier exhibits good density control as the result of continuous magnetohydrodynamic (MHD) activity at the plasma edge called the edge harmonic oscillation (EHO). The EHO enhances the edge particle transport while maintaining a good energy transport barrier. The ability to produce multiple barriers in the QDB regime has led to long duration, high performance plasmas with [beta]{sub NH{sub 8}9} values of 7 for up to 10 times the confinement time. Density profile control in the plasma core of QDB plasmas has been demonstrated using on-axis ECH.
Author: Liang Lin (Ph. D.) Publisher: ISBN: Category : Languages : en Pages : 189
Book Description
(cont.) Our study shows that although the short wavelength turbulence in the ETG range is unstable in the linear ohmic regime, the nonlinear simulation with k[theta][rho]s up to 4 does not raise the electron thermal diffusivity to the experimental level, where k[theta] is the poloidal wavenumber and [rho]s is the ion-sound Larmor radius. The H-Mode studies focus on plasmas before and during internal transport barrier formation in an enhanced D[alpha], H-Mode plasma. The simulated fluctuations from GYRO agree with experimental measurements in the ITG regime. GYRO also shows good agreement in transport predictions with experimental measurements after reducing the ion temperature gradient (~15%) and adding ExB shear suppression, all within the experimental uncertainty.
Author: Frederick B. Marcus Publisher: Springer Nature ISBN: 3031177118 Category : Science Languages : en Pages : 484
Book Description
This book offers an overall review, applying systems engineering and architecture approaches, of the design, optimization, operation and results of leading fusion experiments. These approaches provide a unified means of evaluating reactor design. Methodologies are developed for more coherent construction or evaluation of fusion devices, associated experiments and operating procedures. The main focus is on tokamaks, with almost all machines and their important results being integrated into a systems design space. Case studies focus on DIII-D, TCV, JET, WEST, the fusion reactor prototype ITER and the EU DEMO concept. Stellarator, Mirror and Laser inertial confinement experiments are similarly analysed, including reactor implications of breakeven at NIF. The book examines the engineering and physics design and optimization process for each machine, analysing their performance and major results achieved, thus establishing a basis for the improvement of future machines. The reader will gain a broad historical and up-to-date perspective of the status of nuclear fusion research from both an engineering and physics point of view. Explanations are given of the computational tools needed to design and operate successful experiments and reactor-relevant machines. This book is aimed at both graduate students and practitioners of nuclear fusion science and engineering, as well as those specializing in other fields demanding large and integrated experimental equipment. Systems engineers will obtain valuable insights into fusion applications. References are given to associated complex mathematical derivations, which are beyond the scope of this book. The general reader interested in nuclear fusion will find here an accessible summary of the current state of nuclear fusion.
Author: Jerry Wayne Hughes
Author: Jerry Wayne Hughes
Author: Jerry Wayne Hughes
Author: Maxim V. Umansky
Author: Kirill Zhurovich
Author: Stephen J. Wukitch
Author: 
Author: Liang Lin (Ph. D.)
Author: James Christian Reardon
Author: Frederick B. Marcus
Author: Philip Adrian Schneider