Economic Efficiency of Manufacturing Technology Integration PDF Download

Author: Stefan Tönissen
Publisher: Apprimus Wissenschaftsverlag
ISBN: 3863592786
Category : Technology & Engineering
Languages : en
Pages : 192

View

Book Description
Manufacturing technology integration is an arising paradigm that aims at the functional integration of diverse manufacturing technologies into machine tools. This dissertation applies models of production, cost, and queuing theory to identify conditions under which manufacturing technology integration leads to greater productivity, lower cost, and smaller throughput times than a manufacturing system consisting of conventional single-technology machine tools.

Author: Christian Brecher
Publisher: Springer
ISBN: 3319474529
Category : Technology & Engineering
Languages : en
Pages : 1128

View

Book Description
This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students.

Author: Ilona Horwath
Publisher: transcript Verlag
ISBN: 3839463777
Category : Social Science
Languages : en
Pages : 253

View

Book Description
The big societal challenges, such as climate change and public health, call for innovative approaches to address them. The contributors of this book present new ways to tackle these challenges by inter- and transdisciplinary collaborations in light weight engineering. They introduce a framework for transdisciplinary collaboration, explore the potential of light weight engineering in the areas of climate protection, resource efficiency, and sustainable mobility. To do so, they exemplify results and limitations of transdisciplinary collaboration based on three case studies: the optimization of rescue tools, the re-design of products to foster re-use and recycling processes in companies and society, and the additive manufacturing of individualized assistive tools and prostheses.

Author: Klaus Schwab
Publisher: Crown Currency
ISBN: 1524758876
Category : Business & Economics
Languages : en
Pages : 194

View

Book Description
World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolu­tion, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wear­able sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manu­facturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individu­als. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frame­works that advance progress.

Author: United States. Congress. Joint Committee on Defense Production
Publisher:
ISBN:
Category : Defense contracts
Languages : en
Pages : 1116

View

Book Description

Author: Tianran Wang
Publisher: Springer Science & Business Media
ISBN: 3642138551
Category : Science
Languages : en
Pages : 160

View

Book Description
As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced manufacturing technology. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China’s modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China’s S&T roadmaps for the relevant eight basic and strategic systems in line with China’s reality, further detail S&T initiatives of strategic importance to China’s modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China’s reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation’s highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government’s decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China’s high-tech enterprises through its active engagement in these areas.

Author: United States. Congress. Joint Committee on Defense Production
Publisher:
ISBN:
Category :
Languages : en
Pages : 230

View

Book Description

Author: Fritz Klocke
Publisher: Springer Science & Business Media
ISBN: 3642367720
Category : Technology & Engineering
Languages : en
Pages : 532

View

Book Description
This book provides essential information on metal forming, utilizing a practical distinction between bulk and sheet metal forming. In the field of bulk forming, it examines processes of cold, warm and hot bulk forming, as well as rolling and a new addition, the process of thixoforming. As for the field of sheet metal working, on the one hand it deals with sheet metal forming processes (deep drawing, flange forming, stretch drawing, metal spinning and bending). In terms of special processes, the chapters on internal high-pressure forming and high rate forming have been revised and refined. On the other, the book elucidates and presents the state of the art in sheet metal separation processes (shearing and fineblanking). Furthermore, joining by forming has been added to the new edition as a new chapter describing mechanical methods for joining sheet metals. The new chapter “Basic Principles” addresses both sheet metal and bulk forming, in addition to metal physics, plastomechanics and computational basics; these points are complemented by the newly added topics of metallography and analysis, materials and processes for testing, and tribology and lubrication techniques. The chapters are supplemented by an in-depth description of modern numeric methods such as the finite element method. All chapters have been updated and revised for the new edition, and many practical examples from modern manufacturing processes have been added.

Author: Philipp Weißgraeber
Publisher: Springer Nature
ISBN: 3662629623
Category : Technology & Engineering
Languages : en
Pages : 497

View

Book Description
This volume of the series ARENA2036 compiles the outcomes of the first Stuttgart Conference on Automotive Production (SCAP2020). It contains peer-reviewed contributions from a theoretical as well as practical vantage point and is topically structured according to the following four sections: It discusses (I) Novel Approaches for Efficient Production and Assembly Planning, (II) Smart Production Systems and Data Services, (III) Advances in Manufacturing Processes and Materials, and (IV) New Concepts for Autonomous, Collaborative Intralogistics. Given the restrictive circumstances of 2020, the conference was held as a fully digital event divided into two parts. It opened with a pre-week, allowing everyone to peruse the scientific contributions at their own pace, followed by a two-day live event that enabled experts from the sciences and the industry to engage in various discussions. The conference has proven itself as an insightful forum that allowed for an expertly exchange regarding the pivotal Advances in Automotive Production and Technology.

Author: Chinmay K. Maiti
Publisher: CRC Press
ISBN: 1000638111
Category : Technology & Engineering
Languages : en
Pages : 314

View

Book Description
This book deals with 3D nanodevices such as nanowire and nanosheet transistors at 7 nm and smaller technology nodes. It discusses technology computer-aided design (TCAD) simulations of stress- and strain-engineered advanced semiconductor devices, including III-nitride and RF FDSOI CMOS, for flexible and stretchable electronics. The book focuses on how to set up 3D TCAD simulation tools, from mask layout to process and device simulation, including fabless intelligent manufacturing. The simulation examples chosen are from the most popular devices in use today and provide useful technology and device physics insights. In order to extend the role of TCAD in the More-than-Moore era, the design issues related to strain engineering for flexible and stretchable electronics have been introduced for the first time.