Author: A. E. CummingsPublisher:
ISBN:
Category :
Languages : en
Pages : 58
Book Description
Dynamic Pile Driving Formulas
Author: A. E. CummingsFull-scale Testing and Foundation Design
Author: Mohamad H. HusseinPublisher:
ISBN: 9780784412084
Category : Foundations
Languages : en
Pages : 0
Book Description
GSP 227 contains 51 papers on the use of full-scale testing to enhance the design of foundations presented in honor of Bengt H. Fellenius.
Developing Production Pile Driving Criteria from Test Pile Data
Author: Dan A. BrownPublisher: Transportation Research Board
ISBN: 0309143357
Category : Technology & Engineering
Languages : en
Pages : 518
Book Description
TRB’s National Cooperative Highway Research Program (NCHRP) Synthesis 418: Developing Production Pile Driving Criteria from Test Pile Data provides information on the current practices used by state transportation agencies to develop pile driving criteria, with special attention paid to the use of test pile data in the process.
Pile Foundations in Engineering Practice
Author: Shamsher PrakashPublisher: John Wiley & Sons
ISBN: 9780471616535
Category : Technology & Engineering
Languages : en
Pages : 768
Book Description
This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.
Pile-driving Formulas
Author: A Short Course in Soil-Structure Engineering of Deep Foundations, Excavations and Tunnels
Author: Charles NgPublisher: Thomas Telford
ISBN: 9780727732637
Category : Technology & Engineering
Languages : en
Pages : 426
Book Description
CD includes student editions of the OASYS software packages 'FREW' and 'Safe'.
Geotechnical Related Development and Implementation of Load and Resistance Factor Design (LRFD) Methods
Author: George G. GoblePublisher: Transportation Research Board
ISBN: 9780309068543
Category : Bridges
Languages : en
Pages : 80
Book Description
This synthesis report will be of interest to geotechnical, structural, and bridge engineers, especially those involved in the development and implementation of the geotechnical aspects of the AASHTO Bridge Code. The synthesis documents a review of geotechnical related LRFD specifications and their development worldwide to compare them with the current AASHTO LRFD Bridge Code. Design procedures for foundations, earth retaining structures, and culverts are summarized and compared with the methods specified by the AASHTO code. This TRB report provides information designed to assist engineers in implementing the geotechnical features of LRFD methods. Information for the synthesis was collected by surveying U.S. and Canadian transportation agencies and by conducting a literature search using domestic and international sources. Interviews were also conducted with selected international experts. The limited available experience in the United States and information from international practice are discussed to understand the problems that have arisen in order that solutions may be found. Based on the studies reported here, suggestions for improving the code are identified.
Wave Equation Analysis of Pile Driving: User's manual
Author: George G. GoblePublisher:
ISBN:
Category : Piling (Civil engineering).
Languages : en
Pages : 144
Book Description
Pile Driving Analysis for Pile Design and Quality Assurance
Author: Rodrigo SalgadoPublisher:
ISBN: 9781622604791
Category :
Languages : en
Pages :
Book Description
Driven piles are commonly used in foundation engineering. The most accurate measurement of pile capacity is achieved from measurements made during static load tests. Static load tests, however, may be too expensive for certain projects. In these cases, indirect estimates of the pile capacity can be made through dynamic measurements. These estimates can be performed either through pile driving formulae or through analytical methods, such as the Case method.Pile driving formulae, which relate the pile set per blow to the capacity of the pile, are frequently used to determine whether the pile has achieved its design capacity. However, existing formulae have numerous shortcomings. These formulae are based on empirical observations and lack scientific validation. This report details the development of more accurate and reliable pile driving formulae developed from advanced one-dimensional FE simulations. These formulae are derived for piles installed in five typical soil profiles: a floating pile in sand, an end¿bearing pile in sand, a floating pile in clay, an end¿bearing pile in clay and a pile crossing a normally consolidated clay layer and resting on a dense sand layer. The proposed driving formulae are validated through well-documented case histories of full-scale instrumented driven piles. The proposed formulae are more accurate and reliable on average than other existing methods for the case histories considered in this study.This report also discusses the development of a pile driving control system, a fully integrated system developed by Purdue that can be used to collect, process, and analyze data to estimate the capacities of piles using the Case method and the pile driving formulae developed at Purdue.
Basics of Foundation Design
Author: Bengt FelleniusPublisher: Lulu.com
ISBN: 1365824004
Category : Technology & Engineering
Languages : en
Pages : 488
Book Description
The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.