Author: Egon Stanewsky
Publisher: Springer Science & Business Media
ISBN: 3540458565
Category : Technology & Engineering
Languages : en
Pages : 461
Book Description
The survival of the Aeronautical Industries of Europe in the highly competitive World Aviation Market is strongly dependent on such factors as time-to-market of a new or derivative aircraft and on its manufacturing costs but also on the achievement of a competitive technological advantage by which an increased market share can be gained. Recognizing this, cooperative research is continuously encouraged and co-financed by the European Union in order to strengthen the scientific and technological base of the Aeronautical Industries thus providing - among others - the technological edge needed for survival. Corresponding targets of research within Area 3, Technologies for Transport Means, and here in particular Area 3A, Aeronautics Technologies, of the Industrial and Materials Technologies Program ( Brite -EuRam III, 1994 -1998) have been identified to be aircraft efficiency, cost effectiveness and environmental impact. Concerning aircraft efficiency - relevant to the present research - a reduction in aircraft drag of 10%, a reduction in aircraft fuel consumption of 30%, and a reduction in airframe, engine and system weight of 20% are envisaged. Meeting these objectives has, of course, also a strong positive impact on the environment.
Drag Reduction by Shock and Boundary Layer Control
Author: Egon Stanewsky
Publisher: Springer Science & Business Media
ISBN: 3540458565
Category : Technology & Engineering
Languages : en
Pages : 461
Book Description
The survival of the Aeronautical Industries of Europe in the highly competitive World Aviation Market is strongly dependent on such factors as time-to-market of a new or derivative aircraft and on its manufacturing costs but also on the achievement of a competitive technological advantage by which an increased market share can be gained. Recognizing this, cooperative research is continuously encouraged and co-financed by the European Union in order to strengthen the scientific and technological base of the Aeronautical Industries thus providing - among others - the technological edge needed for survival. Corresponding targets of research within Area 3, Technologies for Transport Means, and here in particular Area 3A, Aeronautics Technologies, of the Industrial and Materials Technologies Program ( Brite -EuRam III, 1994 -1998) have been identified to be aircraft efficiency, cost effectiveness and environmental impact. Concerning aircraft efficiency - relevant to the present research - a reduction in aircraft drag of 10%, a reduction in aircraft fuel consumption of 30%, and a reduction in airframe, engine and system weight of 20% are envisaged. Meeting these objectives has, of course, also a strong positive impact on the environment.
Publisher: Springer Science & Business Media
ISBN: 3540458565
Category : Technology & Engineering
Languages : en
Pages : 461
Book Description
The survival of the Aeronautical Industries of Europe in the highly competitive World Aviation Market is strongly dependent on such factors as time-to-market of a new or derivative aircraft and on its manufacturing costs but also on the achievement of a competitive technological advantage by which an increased market share can be gained. Recognizing this, cooperative research is continuously encouraged and co-financed by the European Union in order to strengthen the scientific and technological base of the Aeronautical Industries thus providing - among others - the technological edge needed for survival. Corresponding targets of research within Area 3, Technologies for Transport Means, and here in particular Area 3A, Aeronautics Technologies, of the Industrial and Materials Technologies Program ( Brite -EuRam III, 1994 -1998) have been identified to be aircraft efficiency, cost effectiveness and environmental impact. Concerning aircraft efficiency - relevant to the present research - a reduction in aircraft drag of 10%, a reduction in aircraft fuel consumption of 30%, and a reduction in airframe, engine and system weight of 20% are envisaged. Meeting these objectives has, of course, also a strong positive impact on the environment.
Shock Wave-Boundary-Layer Interactions
Author: Holger Babinsky
Publisher: Cambridge University Press
ISBN: 1139498649
Category : Technology & Engineering
Languages : en
Pages : 481
Book Description
Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Publisher: Cambridge University Press
ISBN: 1139498649
Category : Technology & Engineering
Languages : en
Pages : 481
Book Description
Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Flow Control Techniques and Applications
Author: Jinjun Wang
Publisher: Cambridge University Press
ISBN: 1107161568
Category : Science
Languages : en
Pages : 293
Book Description
Master the theory, applications and control mechanisms of flow control techniques.
Publisher: Cambridge University Press
ISBN: 1107161568
Category : Science
Languages : en
Pages : 293
Book Description
Master the theory, applications and control mechanisms of flow control techniques.
Shock Waves
Author: Klaus Hannemann
Publisher: Springer Science & Business Media
ISBN: 354085181X
Category : Science
Languages : en
Pages : 786
Book Description
The 26th International Symposium on Shock Waves in Göttingen, Germany was jointly organised by the German Aerospace Centre DLR and the French-German Research Institute of Saint Louis ISL. The year 2007 marked the 50th anniversary of the Symposium, which first took place in 1957 in Boston and has since become an internationally acclaimed series of meetings for the wider Shock Wave Community. The ISSW26 focused on the following areas: Shock Propagation and Reflection, Detonation and Combustion, Hypersonic Flow, Shock Boundary Layer Interaction, Numerical Methods, Medical, Biological and Industrial Applications, Richtmyer Meshkov Instability, Blast Waves, Chemically Reacting Flows, Diagnostics, Facilities, Flow Visualisation, Ignition, Impact and Compaction, Multiphase Flow, Nozzles Flows, Plasmas and Propulsion. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 26 and individuals interested in these fields.
Publisher: Springer Science & Business Media
ISBN: 354085181X
Category : Science
Languages : en
Pages : 786
Book Description
The 26th International Symposium on Shock Waves in Göttingen, Germany was jointly organised by the German Aerospace Centre DLR and the French-German Research Institute of Saint Louis ISL. The year 2007 marked the 50th anniversary of the Symposium, which first took place in 1957 in Boston and has since become an internationally acclaimed series of meetings for the wider Shock Wave Community. The ISSW26 focused on the following areas: Shock Propagation and Reflection, Detonation and Combustion, Hypersonic Flow, Shock Boundary Layer Interaction, Numerical Methods, Medical, Biological and Industrial Applications, Richtmyer Meshkov Instability, Blast Waves, Chemically Reacting Flows, Diagnostics, Facilities, Flow Visualisation, Ignition, Impact and Compaction, Multiphase Flow, Nozzles Flows, Plasmas and Propulsion. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 26 and individuals interested in these fields.
Transition Location Effect on Shock Wave Boundary Layer Interaction
Author: Piotr Doerffer
Publisher: Springer Nature
ISBN: 3030474615
Category : Technology & Engineering
Languages : en
Pages : 540
Book Description
This book presents experimental and numerical findings on reducing shock-induced separation by applying transition upstream the shock wave. The purpose is to find out how close to the shock wave the transition should be located in order to obtain favorable turbulent boundary layer interaction. The book shares findings obtained using advanced flow measurement methods and concerning e.g. the transition location, boundary layer characteristics, and the detection of shock wave configurations. It includes a number of experimental case studies and CFD simulations that offer valuable insights into the flow structure. It covers RANS/URANS methods for the experimental test section design, as well as more advanced techniques, such as LES, hybrid methods and DNS for studying the transition and shock wave interaction in detail. The experimental and numerical investigations presented here were conducted by sixteen different partners in the context of the TFAST Project. The general focus is on determining if and how it is possible to improve flow performance in comparison to laminar interaction. The book mainly addresses academics and professionals whose work involves the aerodynamics of internal and external flows, as well as experimentalists working with compressible flows. It will also be of benefit for CFD developers and users, and for students of aviation and propulsion systems alike.
Publisher: Springer Nature
ISBN: 3030474615
Category : Technology & Engineering
Languages : en
Pages : 540
Book Description
This book presents experimental and numerical findings on reducing shock-induced separation by applying transition upstream the shock wave. The purpose is to find out how close to the shock wave the transition should be located in order to obtain favorable turbulent boundary layer interaction. The book shares findings obtained using advanced flow measurement methods and concerning e.g. the transition location, boundary layer characteristics, and the detection of shock wave configurations. It includes a number of experimental case studies and CFD simulations that offer valuable insights into the flow structure. It covers RANS/URANS methods for the experimental test section design, as well as more advanced techniques, such as LES, hybrid methods and DNS for studying the transition and shock wave interaction in detail. The experimental and numerical investigations presented here were conducted by sixteen different partners in the context of the TFAST Project. The general focus is on determining if and how it is possible to improve flow performance in comparison to laminar interaction. The book mainly addresses academics and professionals whose work involves the aerodynamics of internal and external flows, as well as experimentalists working with compressible flows. It will also be of benefit for CFD developers and users, and for students of aviation and propulsion systems alike.
Separated and Vortical Flow in Aircraft Wing Aerodynamics
Author: Ernst Heinrich Hirschel
Publisher: Springer Nature
ISBN: 366261328X
Category : Technology & Engineering
Languages : en
Pages : 458
Book Description
Fluid mechanical aspects of separated and vortical flow in aircraft wing aerodynamics are treated. The focus is on two wing classes: (1) large aspect-ratio wings and (2) small aspect-ratio delta-type wings. Aerodynamic design issues in general are not dealt with. Discrete numerical simulation methods play a progressively larger role in aircraft design and development. Accordingly, in the introduction to the book the different mathematical models are considered, which underlie the aerodynamic computation methods (panel methods, RANS and scale-resolving methods). Special methods are the Euler methods, which as rather inexpensive methods embrace compressibility effects and also permit to describe lifting-wing flow. The concept of the kinematically active and inactive vorticity content of shear layers gives insight into many flow phenomena, but also, with the second break of symmetry---the first one is due to the Kutta condition---an explanation of lifting-wing flow fields. The prerequisite is an extended definition of separation: “flow-off separation” at sharp trailing edges of class (1) wings and at sharp leading edges of class (2) wings. The vorticity-content concept, with a compatibility condition for flow-off separation at sharp edges, permits to understand the properties of the evolving trailing vortex layer and the resulting pair of trailing vortices of class (1) wings. The concept also shows that Euler methods at sharp delta or strake leading edges of class (2) wings can give reliable results. Three main topics are treated: 1) Basic Principles are considered first: boundary-layer flow, vortex theory, the vorticity content of shear layers, Euler solutions for lifting wings, the Kutta condition in reality and the topology of skin-friction and velocity fields. 2) Unit Problems treat isolated flow phenomena of the two wing classes. Capabilities of panel and Euler methods are investigated. One Unit Problem is the flow past the wing of the NASA Common Research Model. Other Unit Problems concern the lee-side vortex system appearing at the Vortex-Flow Experiment 1 and 2 sharp- and blunt-edged delta configurations, at a delta wing with partly round leading edges, and also at the Blunt Delta Wing at hypersonic speed. 3) Selected Flow Problems of the two wing classes. In short sections practical design problems are discussed. The treatment of flow past fuselages, although desirable, was not possible in the frame of this book.
Publisher: Springer Nature
ISBN: 366261328X
Category : Technology & Engineering
Languages : en
Pages : 458
Book Description
Fluid mechanical aspects of separated and vortical flow in aircraft wing aerodynamics are treated. The focus is on two wing classes: (1) large aspect-ratio wings and (2) small aspect-ratio delta-type wings. Aerodynamic design issues in general are not dealt with. Discrete numerical simulation methods play a progressively larger role in aircraft design and development. Accordingly, in the introduction to the book the different mathematical models are considered, which underlie the aerodynamic computation methods (panel methods, RANS and scale-resolving methods). Special methods are the Euler methods, which as rather inexpensive methods embrace compressibility effects and also permit to describe lifting-wing flow. The concept of the kinematically active and inactive vorticity content of shear layers gives insight into many flow phenomena, but also, with the second break of symmetry---the first one is due to the Kutta condition---an explanation of lifting-wing flow fields. The prerequisite is an extended definition of separation: “flow-off separation” at sharp trailing edges of class (1) wings and at sharp leading edges of class (2) wings. The vorticity-content concept, with a compatibility condition for flow-off separation at sharp edges, permits to understand the properties of the evolving trailing vortex layer and the resulting pair of trailing vortices of class (1) wings. The concept also shows that Euler methods at sharp delta or strake leading edges of class (2) wings can give reliable results. Three main topics are treated: 1) Basic Principles are considered first: boundary-layer flow, vortex theory, the vorticity content of shear layers, Euler solutions for lifting wings, the Kutta condition in reality and the topology of skin-friction and velocity fields. 2) Unit Problems treat isolated flow phenomena of the two wing classes. Capabilities of panel and Euler methods are investigated. One Unit Problem is the flow past the wing of the NASA Common Research Model. Other Unit Problems concern the lee-side vortex system appearing at the Vortex-Flow Experiment 1 and 2 sharp- and blunt-edged delta configurations, at a delta wing with partly round leading edges, and also at the Blunt Delta Wing at hypersonic speed. 3) Selected Flow Problems of the two wing classes. In short sections practical design problems are discussed. The treatment of flow past fuselages, although desirable, was not possible in the frame of this book.
EUROSHOCK - Drag Reduction by Passive Shock Control
Author: Egon Stanewsky
Publisher: Springer Science & Business Media
ISBN: 3322907112
Category : Technology & Engineering
Languages : en
Pages : 432
Book Description
This volume contains the description of an EC-sponsered program to study all relevant aspects of shock/ boundary-layer interaction control, the latter designed to improve aircraft performance at design (cruise) and off-design conditions. The work being presented includes a discussion of basic control experiments and the corresponding physical modeling, to account for shock control and a discussion of the airfoil experiments conducted for code validation and control assessment, in conjunction with the basic experiments and computations. The contents is comprised of a section giving a broad overview of the research carried out here and more detailed individual contributions by the participants in the research. Der Band enthält den Abschlußbericht eines von EU geförderten Projekts EUROSHOCK, das alle relevanten Aspekte der Kontrolle von Stoßfronten und Grenzschichten (wichtig z.B. für die Verbesserung der Flugeigenschaften von Fluzeugen) untersuchte. Neben einer ausführlichen Diskussion der grundlegenden Kontrollexperimente und der zugrundeliegenden Modellierung werden auch die Versuche an Tragflächen beschrieben, die zur Validierung von Modellrechnungen durchgeführt werden. Darüber hinaus enthält der Band auch die detaillierten Ergebnisse der Teilnehmer an dem Forschungsprogramm.
Publisher: Springer Science & Business Media
ISBN: 3322907112
Category : Technology & Engineering
Languages : en
Pages : 432
Book Description
This volume contains the description of an EC-sponsered program to study all relevant aspects of shock/ boundary-layer interaction control, the latter designed to improve aircraft performance at design (cruise) and off-design conditions. The work being presented includes a discussion of basic control experiments and the corresponding physical modeling, to account for shock control and a discussion of the airfoil experiments conducted for code validation and control assessment, in conjunction with the basic experiments and computations. The contents is comprised of a section giving a broad overview of the research carried out here and more detailed individual contributions by the participants in the research. Der Band enthält den Abschlußbericht eines von EU geförderten Projekts EUROSHOCK, das alle relevanten Aspekte der Kontrolle von Stoßfronten und Grenzschichten (wichtig z.B. für die Verbesserung der Flugeigenschaften von Fluzeugen) untersuchte. Neben einer ausführlichen Diskussion der grundlegenden Kontrollexperimente und der zugrundeliegenden Modellierung werden auch die Versuche an Tragflächen beschrieben, die zur Validierung von Modellrechnungen durchgeführt werden. Darüber hinaus enthält der Band auch die detaillierten Ergebnisse der Teilnehmer an dem Forschungsprogramm.
31st International Symposium on Shock Waves 1
Author: Akihiro Sasoh
Publisher: Springer
ISBN: 3319910205
Category : Technology & Engineering
Languages : en
Pages : 1188
Book Description
This is the first volume of a two volume set which presents the results of the 31st International Symposium on Shock Waves (ISSW31), held in Nagoya, Japan in 2017. It was organized with support from the International Shock Wave Institute (ISWI), Shock Wave Research Society of Japan, School of Engineering of Nagoya University, and other societies, organizations, governments and industry. The ISSW31 focused on the following areas: Blast waves, chemical reacting flows, chemical kinetics, detonation and combustion, ignition, facilities, diagnostics, flow visualization, spectroscopy, numerical methods, shock waves in rarefied flows, shock waves in dense gases, shock waves in liquids, shock waves in solids, impact and compaction, supersonic jet, multiphase flow, plasmas, magnetohyrdrodynamics, propulsion, shock waves in internal flows, pseudo-shock wave and shock train, nozzle flow, re-entry gasdynamics, shock waves in space, Richtmyer-Meshkov instability, shock/boundary layer interaction, shock/vortex interaction, shock wave reflection/interaction, shock wave interaction with dusty media, shock wave interaction with granular media, shock wave interaction with porous media, shock wave interaction with obstacles, supersonic and hypersonic flows, sonic boom, shock wave focusing, safety against shock loading, shock waves for material processing, shock-like phenomena, and shock wave education. These proceedings contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 31 and individuals interested in these fields.
Publisher: Springer
ISBN: 3319910205
Category : Technology & Engineering
Languages : en
Pages : 1188
Book Description
This is the first volume of a two volume set which presents the results of the 31st International Symposium on Shock Waves (ISSW31), held in Nagoya, Japan in 2017. It was organized with support from the International Shock Wave Institute (ISWI), Shock Wave Research Society of Japan, School of Engineering of Nagoya University, and other societies, organizations, governments and industry. The ISSW31 focused on the following areas: Blast waves, chemical reacting flows, chemical kinetics, detonation and combustion, ignition, facilities, diagnostics, flow visualization, spectroscopy, numerical methods, shock waves in rarefied flows, shock waves in dense gases, shock waves in liquids, shock waves in solids, impact and compaction, supersonic jet, multiphase flow, plasmas, magnetohyrdrodynamics, propulsion, shock waves in internal flows, pseudo-shock wave and shock train, nozzle flow, re-entry gasdynamics, shock waves in space, Richtmyer-Meshkov instability, shock/boundary layer interaction, shock/vortex interaction, shock wave reflection/interaction, shock wave interaction with dusty media, shock wave interaction with granular media, shock wave interaction with porous media, shock wave interaction with obstacles, supersonic and hypersonic flows, sonic boom, shock wave focusing, safety against shock loading, shock waves for material processing, shock-like phenomena, and shock wave education. These proceedings contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 31 and individuals interested in these fields.
Flow Control
Author: Mohamed Gad-el-Hak
Publisher: Springer Science & Business Media
ISBN: 3540696725
Category : Science
Languages : en
Pages : 533
Book Description
No be certain it can is not based mathematics. knowledge if upon da Vinci, (Leonardo 1452 1519) the humankind. Thinking is one greatest of Joys of Galilei, (Galileo 1564 1642) Now I think is to be the root all hydrodynamics and is at of physical science, second the to none in its mathematics. present beauty of Thomson (William (Lord Kelvin), 1824 1907) The book contains the lecture notes of of the nine instructors at present eight the short Flow Control: Fundamentals and which held course was Practices, in the week 24 28 June and Carg6se, Corsica, France, during 1996, repeated at the of Notre 9 13 1996. University Dame, Indiana, September Following the week in the course a on same was held. Corsica, 5 day workshop topic Selected from the scheduled to 1998 workshop are papers appear early special volume of the International Journal Heat Thermo of Experimental Transfer, and Fluid All Mechanics. three events were Jean Paul dynamics, organized by Bonnet of Universit6 de Andrew Pollard of Univer Poitiers, France, Queen's at and Mohamed Gad el Hak of the of sity Kingston, Canada, University Notre U.S.A.
Publisher: Springer Science & Business Media
ISBN: 3540696725
Category : Science
Languages : en
Pages : 533
Book Description
No be certain it can is not based mathematics. knowledge if upon da Vinci, (Leonardo 1452 1519) the humankind. Thinking is one greatest of Joys of Galilei, (Galileo 1564 1642) Now I think is to be the root all hydrodynamics and is at of physical science, second the to none in its mathematics. present beauty of Thomson (William (Lord Kelvin), 1824 1907) The book contains the lecture notes of of the nine instructors at present eight the short Flow Control: Fundamentals and which held course was Practices, in the week 24 28 June and Carg6se, Corsica, France, during 1996, repeated at the of Notre 9 13 1996. University Dame, Indiana, September Following the week in the course a on same was held. Corsica, 5 day workshop topic Selected from the scheduled to 1998 workshop are papers appear early special volume of the International Journal Heat Thermo of Experimental Transfer, and Fluid All Mechanics. three events were Jean Paul dynamics, organized by Bonnet of Universit6 de Andrew Pollard of Univer Poitiers, France, Queen's at and Mohamed Gad el Hak of the of sity Kingston, Canada, University Notre U.S.A.
30th International Symposium on Shock Waves 2
Author: Gabi Ben-Dor
Publisher: Springer
ISBN: 3319448668
Category : Technology & Engineering
Languages : en
Pages : 681
Book Description
These proceedings collect the papers presented at the 30th International Symposium on Shock Waves (ISSW30), which was held in Tel-Aviv Israel from July 19 to July 24, 2015. The Symposium was organized by Ortra Ltd. The ISSW30 focused on the state of knowledge of the following areas: Nozzle Flow, Supersonic and Hypersonic Flows with Shocks, Supersonic Jets, Chemical Kinetics, Chemical Reacting Flows, Detonation, Combustion, Ignition, Shock Wave Reflection and Interaction, Shock Wave Interaction with Obstacles, Shock Wave Interaction with Porous Media, Shock Wave Interaction with Granular Media, Shock Wave Interaction with Dusty Media, Plasma, Magnetohyrdrodynamics, Re-entry to Earth Atmosphere, Shock Waves in Rarefied Gases, Shock Waves in Condensed Matter (Solids and Liquids), Shock Waves in Dense Gases, Shock Wave Focusing, Richtmyer-Meshkov Instability, Shock Boundary Layer Interaction, Multiphase Flow, Blast Waves, Facilities, Flow Visualization, and Numerical Methods. The two volumes serve as a reference for the participants of the ISSW30 and anyone interested in these fields.
Publisher: Springer
ISBN: 3319448668
Category : Technology & Engineering
Languages : en
Pages : 681
Book Description
These proceedings collect the papers presented at the 30th International Symposium on Shock Waves (ISSW30), which was held in Tel-Aviv Israel from July 19 to July 24, 2015. The Symposium was organized by Ortra Ltd. The ISSW30 focused on the state of knowledge of the following areas: Nozzle Flow, Supersonic and Hypersonic Flows with Shocks, Supersonic Jets, Chemical Kinetics, Chemical Reacting Flows, Detonation, Combustion, Ignition, Shock Wave Reflection and Interaction, Shock Wave Interaction with Obstacles, Shock Wave Interaction with Porous Media, Shock Wave Interaction with Granular Media, Shock Wave Interaction with Dusty Media, Plasma, Magnetohyrdrodynamics, Re-entry to Earth Atmosphere, Shock Waves in Rarefied Gases, Shock Waves in Condensed Matter (Solids and Liquids), Shock Waves in Dense Gases, Shock Wave Focusing, Richtmyer-Meshkov Instability, Shock Boundary Layer Interaction, Multiphase Flow, Blast Waves, Facilities, Flow Visualization, and Numerical Methods. The two volumes serve as a reference for the participants of the ISSW30 and anyone interested in these fields.