Discussion on "Behavior of Fiber-Reinforced Cemented Sand Under Static and Cyclic Loads" by M. H. Maher and Y. C. Ho PDF Download

Author: HI. Ling
Publisher:
ISBN:
Category : Cemented soil
Languages : en
Pages : 2

View

Book Description

Author: MH. Maher
Publisher:
ISBN:
Category : Cemented soil
Languages : en
Pages : 9

View

Book Description
Triaxial static compression, cyclic compression, and splitting tension tests were performed to evaluate the effect of randomly distributed fiber reinforcement on the response of cemented sand to load. Test results indicated that fiber reinforcement significantly increases the compressive and splitting tensile strength of cemented sand. An increase in the compressive and tensile strength was found to be more pronounced at higher fiber contents and longer fiber lengths. Peak strength envelopes in compression indicated that both the friction angle and cohesion intercept of cemented sand were increased as a result of fiber inclusion. Inclusion of fibers also contributed to increased brittleness index of cemented sand while increasing its total energy absorption capacity. Fiber reinforcement also affected the response of cemented sand to cyclic load by significantly increasing the number of cycles, and the magnitude of cyclic strain needed to reach failure.

Author: Sanjay Kumar Shukla
Publisher: Springer
ISBN: 9811030634
Category : Science
Languages : en
Pages : 191

View

Book Description
This book is intended to serve as a one-stop reference on fibre-reinforced soils. Over the past 30-35 years, the engineering behaviour of randomly distributed/oriented fibre-reinforced soil, also called simply fibre-reinforced soil, has been investigated in detail by researchers and engineers worldwide. Waste fibres (plastic waste fibres, old tyre fibres, etc.) create disposal and environmental problems. Utilization of such fibres in construction can help resolve these concerns. Research studies and some field applications have shown that the fibres can be utilized in large quantities in geotechnical and civil engineering applications in a cost-effective and environmentally friendly manner. This book covers a complete description of fibres, their effects when included within a soil or other similar materials such as the fly ash, and their field applications. It gives a detailed view of fibre-reinforced soil engineering. The book will be useful to students, professional, and researchers alike, and can also serve as a text for graduate coursework and professional development programs

Author:
Publisher:
ISBN:
Category : Rocks
Languages : en
Pages : 430

View

Book Description

Author: V.A. Rinaldi
Publisher: IOS Press
ISBN: 1614996016
Category : Science
Languages : en
Pages : 1236

View

Book Description
In November 2015, Buenos Aires, Argentina became the location of several important events for geo-professionals, with the simultaneous holding of the 6th International Symposium on Deformation Characteristics of Geomaterials, the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), the 8th South American Congress on Rock Mechanics (SCRM), as well as the 22nd Argentinean Congress of Geotechnical Engineering (CAMSIGXXII). This synergy provided a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics, and their applications in civil, energy, environmental, and mining engineering. This book presents the proceedings of the 6th International Symposium on Deformation Characteristics of Geomaterials. As well as 118 articles selected for publication after peer review, it includes 7 lectures delivered by invited keynote speakers and the Third Bishop Lecture, delivered by Professor Herve Di Benedetto of the University of Lyon, France, who presented a reference work on the advanced testing and modeling of bituminous bounded and unbounded granular materials. The conference brought together practitioners, researchers and educators from around the world engaged in the understanding of the deformation properties of geo-materials before failure, and the small strain parameters as fundamental characteristics of geo-materials. The main topics covered by the symposium include experimental investigations from very small strains to beyond failure, including multi-physical approach; HTC M coupling behavior, characterization and modeling of various geo-materials and interfaces; and practical prediction and interpretation of ground responses: field observation and case histories.

Author: T. G. Sitharam
Publisher: Springer Nature
ISBN: 981165669X
Category : Science
Languages : en
Pages : 547

View

Book Description
This volume presents select papers presented at the 7th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics. The papers discuss advances in the fields of soil dynamics and geotechnical earthquake engineering. Some of the themes include ground response analysis & local site effect, seismic slope stability & landslides, application of AI in geotechnical earthquake engineering, etc. A strong emphasis is placed on connecting academic research and field practice, with many examples, case studies, best practices, and discussions on performance based design. This volume will be of interest to researchers and practicing engineers alike.

Author: Satyajit Patel
Publisher: Springer Nature
ISBN: 9813364440
Category : Science
Languages : en
Pages : 848

View

Book Description
This book comprises select proceedings of the annual conference of the Indian Geotechnical Society. The conference brings together research and case histories on various aspects of geotechnical and geoenvironmental engineering. The book presents papers on geotechnical applications and case histories, covering topics such as (i) Characterization of Geomaterials and Physical Modelling; (ii) Foundations and Deep Excavations; (iii) Soil Stabilization and Ground Improvement; (iv) Geoenvironmental Engineering and Waste Material Utilization; (v) Soil Dynamics and Earthquake Geotechnical Engineering; (vi) Earth Retaining Structures, Dams and Embankments; (vii) Slope Stability and Landslides; (viii) Transportation Geotechnics; (ix) Geosynthetics Applications; (x) Computational, Analytical and Numerical Modelling; (xi) Rock Engineering, Tunnelling and Underground Constructions; (xii) Forensic Geotechnical Engineering and Case Studies; and (xiii) Others Topics: Behaviour of Unsaturated Soils, Offshore and Marine Geotechnics, Remote Sensing and GIS, Field Investigations, Instrumentation and Monitoring, Retrofitting of Geotechnical Structures, Reliability in Geotechnical Engineering, Geotechnical Education, Codes and Standards, and other relevant topics. The contents of this book are of interest to researchers and practicing engineers alike.

Author: Bujang B.K. Huat
Publisher: CRC Press
ISBN: 0415659418
Category : Technology & Engineering
Languages : en
Pages : 284

View

Book Description
Peat and organic soils commonly occur as extremely soft, wet, unconsolidated surficial deposits that are an integral part of wetland systems. These types of soils can give rise to geotechnical problems in the area of sampling, settlement, stability, in situ testing, stabilisation and construction. There is therefore a tendency to either avoid building on these soils, or, when this is not possible, to simply remove or replace soils, which in some instances can lead to possibly uneconomical design and construction alternatives. However, in many countries of the world, these soils cover a substantial land area and pressure on land use is resulting in ever more frequent utilisation of such marginal grounds. For the successful design, construction and performance of structures on such marginal soils, it is crucial to predict geotechnical behaviour in terms of settlement, shear strength and stability, with respect to time. This means expanding our knowledge base and calls for a reliable characterisation of their geotechnical properties and mechanical behaviour and subsequently, the devising of suitable design parameters and construction techniques for dealing with these materials. A sound scientific understanding of the nature and functions of peat and organic soils is critical to their correct and safe use, and this book contributes by offering students, researchers, engineers and academics involved with these types of soils a comprehensive overview. This book will be useful not only to those in the field of geotechnical engineering, but also to soil scientists and agriculturalists, who are involved in the development of peatlands.

Author: Kenichi Soga
Publisher: CRC Press
ISBN: 1315737329
Category : Technology & Engineering
Languages : en
Pages : 1668

View

Book Description
Geomechanics from Micro to Macro contains 268 papers presented at the International Symposium on Geomechanics from Micro and Macro (IS-Cambridge, UK, 1-3 September 2014). The symposium created a forum for the dissemination of new advances in the micro-macro relations of geomaterial behaviour and its modelling. The papers on experimental investigati

Author: D. Manzanal
Publisher: IOS Press
ISBN: 1614996032
Category : Technology & Engineering
Languages : en
Pages : 3344

View

Book Description
The work of geotechnical engineers contributes to the creation of safe, economic and pleasant spaces to live, work and relax all over the world. Advances are constantly being made, and the expertise of the profession becomes ever more important with the increased pressure on space and resources. This book presents the proceedings of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), held in Buenos Aires, Argentina, in November 2015. This conference, held every four years, is an important opportunity for international experts, researchers, academics, professionals and geo-engineering companies to meet and exchange ideas and research findings in the areas of soil mechanics, rock mechanics, and their applications in civil, mining and environmental engineering. The articles are divided into nine sections: transportation geotechnics; in-situ testing; geo-engineering for energy and sustainability; numerical modeling in geotechnics; foundations and ground improvement; unsaturated soil behavior; embankments, dams and tailings; excavations and tunnels; and geo-risks, and cover a wide spectrum of issues from fundamentals to applications in geotechnics. This book will undoubtedly represent an essential reference for academics, researchers and practitioners in the field of soil mechanics and geotechnical engineering. In this proceedings, approximately 65% of the contributions are in English, and 35% of the contributions are in Spanish or Portuguese.