Development of a Non-solvent Based Test Method for Evaluating Reclaimed Asphalt Pavement Mixes PDF Download

Author: Alan Carter
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 0

View

Book Description

Author: Carter, Alan
Publisher: Ann Arbor, Mich. : University Microfilms International
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 206

View

Book Description

Author: Rebecca S. McDaniel
Publisher:
ISBN: 9781622605118
Category :
Languages : en
Pages :

View

Book Description
In a previous JTRP project published in 2010, Identification of Laboratory Techniques to Optimize Superpave HMA Surface Friction Characteristics, a laboratory procedure to polish and test the frictional properties of asphalt mixtures was developed. Subsequently, the procedure has been used in other research efforts to evaluate the frictional properties of recycled asphalt pavement (RAP) and local (possibly marginal) aggregate blends and for other testing purposes. Most notably, the procedure has been developed into Indiana Test Method (ITM) 221, "Acceptance Procedures for HMA Surface Mixture Coarse Aggregates for ESAL ¿10,000,000." The method requires compaction, polishing and testing of 500 mm by 500 mm (20 in. by 20 in.) square slabs of asphalt mix. This research project was initiated based to explore the possibility of expanding use of the lab polishing/testing procedure to test gyratory specimens or field cores. It was envisioned that such a method could be used during mix design as a check on potential frictional properties and/or as a quality acceptance test. A means of fabricating a circular test ring from seven cylindrical specimens was developed and used to test five different plant produced mixtures. Comparisons of ITM 221 slabs, gyratory specimens compacted to different air void contents and field cores showed cylindrical specimens could yield similar results to the accepted slab test method.

Author: Hamza Alkuime
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 626

View

Book Description
Asphalt mixes are designed to provide adequate resistance to various distresses including cracking, rutting, and moisture damage. Recently, more efforts are directed towards including performance assessment tests during the design and production of asphalt mixes. Performance-Engineered Mix Design (PEMD) or Balanced Mix Design (BMD) is a new and innovative design approach that incorporates performance assessment tests to optimize the design of asphalt mixes to provide adequate performance. Although transportation agencies are motivated to implement the PEMD approach, several research knowledge gaps and concerns need to be addressed before PEMD successful implementation. This research study aims to advance, develop, and implement performance-engineered design approach and specifications to extend the service life of asphalt pavements.The first phase of this research developed and evaluated a new and innovative monotonic cracking performance indicator called Weibull Cracking Resistance Index (WeibullCRI). The proposed indicator describes the entire load-displacement curve, which overcomes the limitations of the existing performance indicators. First, WeibullCRI was examined using an extensive laboratory evaluation of 16 different asphalt mixes. The results indicated that WeibullCRI was sensitive to variation in binder content and binder PG and the results were in good agreement with the expected cracking resistance based on the composition of the studied mixes. In addition, WeibullCRI had low variability in test results and higher number of various statistical groups. Next, the applicability of WeibullCRI as a unified approach to analyze the results of various monotonic assessment tests was investigated using data generated by other researchers and reported in the literature. The results indicated that WeibullCRI is able to interpret the testing results of various monotonic performance assessment tests (i.e., IDT- intermediate temperature, Semi-Circle Bending [SCB]- intermediate temperature, SCB-low temperature, Disk-Shaped Compact Tension [DCT], and Simple Punching Shear Test [SPST]) and various displacement measurement methods (i.e., actuator vertical displacement and Crack Mouth Opening Displacement [CMOD]). WeibullCRI was also sensitive to variation in test conditions (i.e., specimen notch depth, thickness, and air void content) and mix composition proportions (i.e., binder content, binder grade, aggregate type, NMAS, aging, rejuvenator dosages, and Recycled Asphalt Pavement [RAP] materials).The second phase of this study reviewed and evaluated the current monotonic cracking performance assessment tests and indicators including the developed WeibullCRI used to assess asphalt mix resistance to cracking. In this phase, the testing requirements of various test standards, key publications, concepts, calculation methods, physical meaning, and advantages and disadvantages of various performance indicators were reviewed. Then, the study investigated the validity of the most promising testing standards and indicators. Three testing standards and 12 performance indicators were considered. Several aspects were examined including 1) investigate the fundamental meaning of the variation in the load-displacement curve in terms of the change in mix resistance to cracking, 2) sensitivity of performance indicators to mix compositions, 3) variability in test results, 4) number of various statistical groups, 5) correlation between various performance indicators, 6) direct correlation between laboratory results of monotonic performance tests and indicators with the observed field cracking, and 7) ability to develop PEMD specifications. A comprehensive laboratory investigation was conducted using 33 different asphalt mixes included six Laboratory Mixed-Laboratory Compacted (LMLC) and 10 Plant Mixed-Laboratory Compacted (PMLC) asphalt mixes, and 17 field projects with known cracking performance. The results showed that WeibullCRI calculated from the IDT test to have the lowest test variability, maximum number of Tukey's honestly significant difference (HSD) groups, and have excellent correlation with cyclic cracking resistance assessment indicators as compared to the other monotonic performance indicators. In addition, the results demonstrated that there was no direct correlation between all monotonic performance indicators and the observed field cracking performance, therefore an alternative approach was proposed, evaluated, and validated to develop performance thresholds for the selected performance indicators. Three pass/fail cracking performance thresholds were proposed for WeibullCRI to distinguish between asphalt mixes with good, fair, and poor cracking resistance using the proposed approach.The third phase of this study focused on the development and evaluation of a new cyclic cracking assessment test called Multi-Stage Semi-circle bending Dynamic (MSSD). The test offers advantages over the available monotonic and dynamic cracking assessment tests and addresses major concerns to implement the PEMD (i.e., performance test validity, complex specimen preparation, and testing time). The developed MSSD test simulates the repeated loading (cyclic) in a reasonable testing time (less than 9 hours per test regardless of mix type), has a fixed loading sequence that works for mixes with different characteristics (e.g., mix composition, percent air void content, thickness, etc.), and utilizes testing equipment and specimen geometry similar to that used in monotonic tests. The laboratory evaluation results showed that the proposed test and its derived performance indicators were sensitive to mix composition and had lower variability compared to other dynamic tests. In addition, the MSSD performance indicators correlated well with the observed cracking performance in the field and were able to distinguish between projects with good and poor resistance to cracking. Based on the evaluation results, three pass/fail cracking performance thresholds were proposed to distinguish between asphalt mixes with good, fair, and poor resistance to cracking.The fourth phase of this research examined the most promising tests and performance indicators to evaluate the resistance of asphalt mixtures to rutting. Two tests (i.e., Hamburg Wheel Tracking test [HWTT], and Asphalt Pavement Analyzer [APA] rut test) and three rutting performance indicators (i.e., HWTT rut depth after 15,000 passes [HWTT15000], HWTT rut depth at 20,000 passes [HWTT20000], and APA rut depth after 8,000 cycles [APA8000]) were considered. An intensive laboratory investigation was conducted that included six LMLC, 10 PMLC, and field cores extracted from 17 field projects. The research findings showed that both HWTT and APA rut test provided similar rutting assessment for the evaluated mixes. The study recommended using the HWTT over the APA rut test since HWTT can be also used to assess the resistance of asphalt mixtures to moisture damage to moisture damage. Also, the study recommended using HWTT15000 over HWTT20000 as a performance indicator since it requires less testing time.The final phase of this research provided recommendations of the best testing standards, performance indicators, and performance specifications to assess asphalt mix resistance to cracking and rutting. In addition, it provided guidelines to demonstrate the use of the proposed tools during the design and/or production of asphalt mixes. It also proposed standards testing procedures for the newly developed WeibullCRI performance indicator and MSSD test.

Author: Vittorio Guglielmetti
Publisher: CRC Press
ISBN: 0415558549
Category : Technology & Engineering
Languages : en
Pages : 1336

View

Book Description
The design and construction of “long and deep” tunnels, i.e. tunnels under mountains, characterised by either considerable length and/or overburden, represent a considerable challenge. The scope of this book is not to instruct how to design and construct such tunnels but to share a method to identify the potential hazards related to the process of designing and constructing long and deep tunnels, to produce a relevant comprehensive analysis and listing, to quantify the probability and consequences, and to design proper mitigation measures and countermeasures. The design, developed using probabilistic methods, is verified during execution by means of the so called Plan for Advance of the Tunnel (PAT) method, which allows adapting the design and control parameters of the future stretches of the tunnel to the results of the stretches already finished, using the monitoring data base. Numerous criteria are given to identify the key parameters, necessary for the PAT procedure. Best practices of excavation management with the help of real time monitoring and control are also provided. Furthermore cost and time evaluation systems are analysed. Finally, contractual aspects related to construction by contract are investigated, for best development and application of models more appropriate for tunnelling-construction contracts. The work will be of interest to practising engineers, designers, consultants and students in mining, underground, tunnelling, transportation and construction engineering, as well as to foundation and geological engineers, urban planners/developers and architects.

Author:
Publisher:
ISBN:
Category : Highway engineering
Languages : en
Pages : 592

View

Book Description

Author: National Research Council (U.S.). Transportation Research Board
Publisher: Transportation Research Board National Research
ISBN:
Category : Nature
Languages : en
Pages : 64

View

Book Description
"This synthesis will be of special interest and usefulness to design engineers, materials technologists, and others seeking information on the potential use of recycled materials in design, construction, rehabilitation, and maintenance of pavements, bases, and other components of the highway system. Detailed information is presented on procedures for pavement recycling."--Avant-propos.

Author:
Publisher:
ISBN:
Category : Highway engineering
Languages : en
Pages : 768

View

Book Description

Author:
Publisher:
ISBN:
Category : Highway research
Languages : en
Pages : 44

View

Book Description

Author: ASTM Committee D-18 on Soil and Rock. Subcommittee D-4 on Road and Paving Materials
Publisher: ASTM International
ISBN: 9780803118652
Category : Technology & Engineering
Languages : en
Pages : 546

View

Book Description
The proceedings of June 1993 international symposium held in Atlanta, Georgia, called specifically to develop and standardized evaluation procedures for non-destructive methods of testing pavements. The 29 papers discuss analytical models and techniques, measurement and calculation techniques in the field and laboratory, problems and errors associated with backcalculation methods and design parameters, and testing for other pavement uses. Also includes a history of the quest for a standard and the status of that effort. Reproduced from typescripts. Annotation copyright by Book News, Inc., Portland, OR