Development of a model for cold start of direct injection diesel engine PDF Download

Author: Kyoosik Shin
Publisher:
ISBN:
Category : Diesel motor
Languages : en
Pages : 294

View

Book Description

Author: Arun Cherumuttathu Ravindran
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

View

Book Description
Developing a profound understanding of the combustion characteristics of the cold-start phase of a Direct Injection Spark Ignition (DISI) engine is critical to meeting the increasingly stringent emissions regulations. Computational Fluid Dynamics (CFD) modeling of gasoline DISI combustion under normal operating conditions has been discussed in detail using both the detailed chemistry approach and flamelet models (e.g., the G-Equation). However, there has been little discussion regarding the capability of the existing models to capture DISI combustion under cold-start conditions. Accurate predictions of cold-start behavior involves the efficient use of multiple models - spray modeling to capture the split injection strategies, models to capture the wall-film interactions, ignition modeling to capture the effects of retarded spark timings, combustion modeling to accurately capture the flame front propagation, and turbulence modeling to capture the effects of decaying turbulent kinetic energy. The retarded spark timing helps to generate high heat flux in the exhaust for a rapid catalyst light-off of the after-treatment system during cold-start. However, the adverse effect is a reduced turbulent flame speed due to decaying turbulent kinetic energy. Accordingly, developing an understanding of the turbulence-chemistry interactions is imperative for accurate modeling of combustion under cold-start conditions.This study introduces a modified version of the G-Equation combustion model called the GLR model (G-Equation for Lower Reynolds number regimes) that exhibits improved performance under cold-start conditions. The model attempts to estimate the turbulent flame speed based on the local conditions of fuel concentration and turbulence intensity. The local conditions and the associated turbulent-chemistry interactions are studied by tracking the flame front on the Borghi-Peters regime diagram. To accurately model the DISI combustion process, it is important to account for the effects of the spark energy discharge process. In this work, an ignition model is presented that is compatible with the G-Equation combustion model, and which accounts for the effects of plasma expansion and local mixture properties such as turbulence and the equivalence ratio on the early flame kernel growth. The model is referred to as the Plasma Velocity on G-Surface (PVG) model, and it uses the G-surface to capture the kernel growth. The model derives its theory from the DPIK model and applies its concepts onto an Eulerian framework, thereby removing the need for Lagrangian particles to track the kernel growth. Finally, a methodology of using machine learning (ML) techniques in combination with 3D CFD modeling to optimize the cold-start fast-idle phase of a DISI engine is presented. The optimization process implies the identification of the range of operating parameters, that will ensure the following criteria under cold-start conditions: (1) a fixed IMEP of 2 bar (BMEP of 0 bar), (2) a stoichiometric exhaust equivalence ratio (based on carbon-to-oxygen atoms) to ensure the efficient operation of the after-treatment system, (3) enough exhaust heat flux to ensure a rapid light-off of the after-treatment system, and (4) acceptable NOx and HC emissions. Gaussian Process Regression (GPR)-based ML models are employed to make predictions about DISI cold-start behavior with acceptable accuracy and a substantially reduced computational time.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
Abstract : In this thesis, two different works related to cold start of a direct-injection (DI) gasoline engine are shown. First, effect of split injection is studied on engine exhaust temperature and hydrocarbon emissions for cold start conditions. Instead of single injection, two injections are done, one injection during the intake stroke and one injection during the compression stroke. Split injection is known to reduce jet wall wetting, thus reducing the hydrocarbon emissions from engine itself. Further, split injection reduces engine cycle-by-cycle variability with respect to the single injection case. Correlations between start of injection for the injection in the intake stroke (SOI), end of injection for the injection in the compression stroke (EOI) and Split Ratio (SR) with Exhaust Temperature (Texh) and engine hydrocarbon emissions are proposed with the help of design of experiments (DOE). These correlations could be used for controlling exhaust temperature during cold start. Second, because of repetitive marshalling of a vehicle, i.e. cold start the engine on the vehicle and drive it a few feet and then turn it off, spark plugs are observed to get fouled. A spark plug is considered to be fouled when the insulator nose becomes coated with a foreign substance including oil, fuel or carbon. This enables the ignition coil voltage to follow along the insulator nose and ground out rather than bridging gap and firing normally. A tool to measure quasi real-time spark plug fouling is proposed in this work, which uses in-cylinder ion data to measure offset voltage which is then used to calculate spark plug shunt resistance. Based on the spark plug shunt resistance, fouling level of the plug can be calculated, and the condition of the plug can be determined.

Author: H Zhao
Publisher: Elsevier
ISBN: 1845697324
Category : Technology & Engineering
Languages : en
Pages : 325

View

Book Description
Direct injection enables precise control of the fuel/air mixture so that engines can be tuned for improved power and fuel economy, but ongoing research challenges remain in improving the technology for commercial applications. As fuel prices escalate DI engines are expected to gain in popularity for automotive applications. This important book, in two volumes, reviews the science and technology of different types of DI combustion engines and their fuels. Volume 1 deals with direct injection gasoline and CNG engines, including history and essential principles, approaches to improved fuel economy, design, optimisation, optical techniques and their applications. Reviews key technologies for enhancing direct injection (DI) gasoline engines Examines approaches to improved fuel economy and lower emissions Discusses DI compressed natural gas (CNG) engines and biofuels

Author: Akio Kobayashi
Publisher:
ISBN:
Category : Diesel motor
Languages : en
Pages : 8

View

Book Description

Author: Avinash Kumar Agarwal
Publisher: Springer Nature
ISBN: 9811686181
Category : Technology & Engineering
Languages : en
Pages : 368

View

Book Description
This book focuses on the simulation and modeling of internal combustion engines. The contents include various aspects of diesel and gasoline engine modeling and simulation such as spray, combustion, ignition, in-cylinder phenomena, emissions, exhaust heat recovery. It also explored engine models and analysis of cylinder bore piston stresses and temperature effects. This book includes recent literature and focuses on current modeling and simulation trends for internal combustion engines. Readers will gain knowledge about engine process simulation and modeling, helpful for the development of efficient and emission-free engines. A few chapters highlight the review of state-of-the-art models for spray, combustion, and emissions, focusing on the theory, models, and their applications from an engine point of view. This volume would be of interest to professionals, post-graduate students involved in alternative fuels, IC engines, engine modeling and simulation, and environmental research.

Author: Kevin P. Duffy
Publisher:
ISBN:
Category : Combustion gases
Languages : en
Pages : 454

View

Book Description

Author: Qianfan Xin
Publisher: Elsevier
ISBN: 0857090836
Category : Technology & Engineering
Languages : en
Pages : 1087

View

Book Description
Diesel Engine System Design links everything diesel engineers need to know about engine performance and system design in order for them to master all the essential topics quickly and to solve practical design problems. Based on the author's unique experience in the field, it enables engineers to come up with an appropriate specification at an early stage in the product development cycle. Links everything diesel engineers need to know about engine performance and system design featuring essential topics and techniques to solve practical design problems Focuses on engine performance and system integration including important approaches for modelling and analysis Explores fundamental concepts and generic techniques in diesel engine system design incorporating durability, reliability and optimization theories

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

View

Book Description
An experimental and numerical study was carried out to simulate the diesel spray breakup, vaporization, ignition, and combustion during cold starting conditions. This report summarizes the optical diagnostics and multi-dimensional computation results for two single-cylinder optically accessible engines. The results showed that optically accessible engines provide very useful information for studying the diesel cold starting conditions, which also provide a critical test for diesel combustion models. The pre-ignition chemistry showed great sensitivity to the compressed air temperature. KIVA with a modified shell model responds accordingly to the change of inlet air temperatures and fuel injection parameters. However, other submodels do not have enough sensitivity to simulate the starting of diesel engine without careful validation and further improvements. A method to compute the ignition delay in engines from data obtained in constant volume vessels was also developed. The method accounts for the effect of variations in charge pressure and temperature on the formation of the chain carriers from the combustible mixture during the ID period. A comparison is made between the computed ID and data obtained in a LABECO research engine under different ambient temperatures ranging from +200 to - 100 C.

Author: F. Zhao
Publisher: Elsevier
ISBN: 008055279X
Category : Technology & Engineering
Languages : en
Pages : 129

View

Book Description
The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.