Development and Experimental Validation of Self-centering Buckling-restrained Braces with Shape Memory Alloy PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Development and Experimental Validation of Self-centering Buckling-restrained Braces with Shape Memory Alloy PDF full book. Access full book title Development and Experimental Validation of Self-centering Buckling-restrained Braces with Shape Memory Alloy by David J. Miller. Download full books in PDF and EPUB format.
Author: David J. Miller Publisher: ISBN: Category : Languages : en Pages :
Book Description
Although conventional earthquake-resisting structural systems provide adequate life safety when properly designed, they often rely on significant structural damage to dissipate the seismic energy. The structural damage and the residual drift that may result from the inelastic response can make a building difficult, if not financially unreasonable, to repair after an earthquake. As a result, development of systems that return to their initial position (i.e., 0́−self-center0́+) following an earthquake and minimize structural damage is a crucial need. The research presented in this thesis aims to address this need by creating an innovative self-centering brace for advanced seismic performance. In the present study, the seismic behavior and performance of self-centering buckling-restrained braces (SC-BRBs) using shape memory alloys (SMAs) is investigated. The SC-BRBs consist of a typical BRB component, which provides energy dissipation, and pre-tensioned superelastic NiTi shape memory alloy rods, which provide self-centering. The SMA rods are attached to the BRB portion of the brace using a set of concentric tubes and free-floating anchorage plates that cause the SMA rods to elongate when the brace is both in tension and compression. Using a five-story building as context, half-scale SC-BRBs are designed and fabricated for experimental validation. To characterize hysteretic response, the braces are subjected to a cyclic loading protocol adapted from the AISC Seismic Provisions for Structural Steel Buildings. The results of the experiments are used to validate an SC-BRB model in OpenSEES, which is used to conduct further parametric studies of SC-BRB behavior.
Author: David J. Miller Publisher: ISBN: Category : Languages : en Pages :
Book Description
Although conventional earthquake-resisting structural systems provide adequate life safety when properly designed, they often rely on significant structural damage to dissipate the seismic energy. The structural damage and the residual drift that may result from the inelastic response can make a building difficult, if not financially unreasonable, to repair after an earthquake. As a result, development of systems that return to their initial position (i.e., 0́−self-center0́+) following an earthquake and minimize structural damage is a crucial need. The research presented in this thesis aims to address this need by creating an innovative self-centering brace for advanced seismic performance. In the present study, the seismic behavior and performance of self-centering buckling-restrained braces (SC-BRBs) using shape memory alloys (SMAs) is investigated. The SC-BRBs consist of a typical BRB component, which provides energy dissipation, and pre-tensioned superelastic NiTi shape memory alloy rods, which provide self-centering. The SMA rods are attached to the BRB portion of the brace using a set of concentric tubes and free-floating anchorage plates that cause the SMA rods to elongate when the brace is both in tension and compression. Using a five-story building as context, half-scale SC-BRBs are designed and fabricated for experimental validation. To characterize hysteretic response, the braces are subjected to a cyclic loading protocol adapted from the AISC Seismic Provisions for Structural Steel Buildings. The results of the experiments are used to validate an SC-BRB model in OpenSEES, which is used to conduct further parametric studies of SC-BRB behavior.
Author: Manish Shrikhande Publisher: Springer Nature ISBN: 9819916089 Category : Science Languages : en Pages : 769
Book Description
This book presents select proceedings of the 17th Symposium on Earthquake Engineering organized by the Department of Earthquake Engineering, Indian Institute of Technology Roorkee. The topics covered in the proceedings include engineering seismology and seismotectonics, earthquake hazard assessment, seismic microzonation and urban planning, dynamic properties of soils and ground response, ground improvement techniques for seismic hazards, computational soil dynamics, dynamic soil–structure interaction, codal provisions on earthquake-resistant design, seismic evaluation and retrofitting of structures, earthquake disaster mitigation and management, and many more. This book also discusses relevant issues related to earthquakes, such as human response and socioeconomic matters, post-earthquake rehabilitation, earthquake engineering education, public awareness, participation and enforcement of building safety laws, and earthquake prediction and early warning system. This book is a valuable reference for researchers and professionals working in the area of earthquake engineering.
Author: Antonio Concilio Publisher: Elsevier ISBN: 0080999212 Category : Technology & Engineering Languages : en Pages : 449
Book Description
Shape Memory Alloy Engineering introduces materials, mechanical, and aerospace engineers to shape memory alloys (SMAs), providing a unique perspective that combines fundamental theory with new approaches to design and modeling of actual SMAs as compact and inexpensive actuators for use in aerospace and other applications. With this book readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams, allowing them to design innovative compact actuation systems for applications from aerospace and aeronautics to ships, cars, and trucks. The book realistically discusses both the potential of these fascinating materials as well as their limitations in everyday life, and how to overcome some of those limitations in order to achieve proper design of useful SMA mechanisms. Discusses material characterization processes and results for a number of newer SMAs Incorporates numerical (FE) simulation and integration procedures into commercial codes (Msc/Nastran, Abaqus, and others) Provides detailed examples on design procedures and optimization of SMA-based actuation systems for real cases, from specs to verification lab tests on physical demonstrators One of the few SMA books to include design and set-up of demonstrator characterization tests and correlation with numerical models
Author: Hong Hao Publisher: CRC Press ISBN: 1351850210 Category : Science Languages : en Pages : 1966
Book Description
Mechanics of Structures and Materials: Advancements and Challenges is a collection of peer-reviewed papers presented at the 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24, Curtin University, Perth, Western Australia, 6-9 December 2016). The contributions from academics, researchers and practising engineers from Australasian, Asia-pacific region and around the world, cover a wide range of topics, including: • Structural mechanics • Computational mechanics • Reinforced and prestressed concrete structures • Steel structures • Composite structures • Civil engineering materials • Fire engineering • Coastal and offshore structures • Dynamic analysis of structures • Structural health monitoring and damage identification • Structural reliability analysis and design • Structural optimization • Fracture and damage mechanics • Soil mechanics and foundation engineering • Pavement materials and technology • Shock and impact loading • Earthquake loading • Traffic and other man-made loadings • Wave and wind loading • Thermal effects • Design codes Mechanics of Structures and Materials: Advancements and Challenges will be of interest to academics and professionals involved in Structural Engineering and Materials Science.
Author: Rishi Gupta Publisher: Springer Nature ISBN: 3031341597 Category : Technology & Engineering Languages : en Pages : 1180
Book Description
This book comprises the proceedings of the Annual Conference of the Canadian Society of Civil Engineering 2022. The contents of this volume focus on specialty conferences in construction, environmental, hydrotechnical, materials, structures, transportation engineering, etc. This volume will prove a valuable resource for those in academia and industry.
Author: Raghu V. Prakash Publisher: Springer ISBN: 9811387672 Category : Technology & Engineering Languages : en Pages : 858
Book Description
This volume contains selected papers from the Second Quadrennial International Conference on Structural Integrity (ICONS-2018). The papers cover important topics related to structural integrity of critical installations, such as power plants, aircrafts, spacecrafts, defense and civilian components. The focus is on assuring safety of operations with high levels of reliability and structural integrity. This volume will be of interest to plant operators working with safety critical equipment, engineering solution providers, software professionals working on engineering analysis, as well as academics working in the area.
Author: A. Rama Mohan Rao Publisher: Springer ISBN: 9811303622 Category : Science Languages : en Pages : 1137
Book Description
This book is a collection of select papers presented at the Tenth Structural Engineering Convention 2016 (SEC-2016). It comprises plenary, invited, and contributory papers covering numerous applications from a wide spectrum of areas related to structural engineering. It presents contributions by academics, researchers, and practicing structural engineers addressing analysis and design of concrete and steel structures, computational structural mechanics, new building materials for sustainable construction, mitigation of structures against natural hazards, structural health monitoring, wind and earthquake engineering, vibration control and smart structures, condition assessment and performance evaluation, repair, rehabilitation and retrofit of structures. Also covering advances in construction techniques/ practices, behavior of structures under blast/impact loading, fatigue and fracture, composite materials and structures, and structures for non-conventional energy (wind and solar), it will serve as a valuable resource for researchers, students and practicing engineers alike.
Author: George C. Tsiatas Publisher: Frontiers Media SA ISBN: 2889636070 Category : Languages : en Pages : 266
Book Description
Nowadays, numerical computation has become one of the most vigorous tools for scientists, researchers and professional engineers, following the enormous progress made during the last decades in computing technology, in terms of both computer hardware and software development. Although this has led to tremendous achievements in computer-based structural engineering, the increasing necessity of solving complex problems in engineering requires the development of new ideas and innovative methods for providing accurate numerical solutions in affordable computing times. This collection aims at providing a forum for the presentation and discussion of state-of-the-art innovative developments, concepts, methodologies and approaches in scientific computation applied to structural engineering. It involves a wide coverage of timely issues on computational structural engineering with a broad range of both research and advanced practical applications. This Research Topic encompasses, but is not restricted to, the following scientific areas: modeling in structural engineering; finite element methods; boundary element methods; static and dynamic analysis of structures; structural stability; structural mechanics; meshless methods; smart structures and systems; fire engineering; blast engineering; structural reliability; structural health monitoring and control; optimization; and composite materials, with application to engineering structures.
Author: Ehsan Noroozinejad Farsangi Publisher: CRC Press ISBN: 1000912906 Category : Technology & Engineering Languages : en Pages : 639
Book Description
While the word "automation" may conjure images of robots taking over jobs, the reality is much more nuanced. In construction, for instance, automation is less likely to diminish employment opportunities than it is to increase productivity. Indeed, automation alongside the global need for new and updated infrastructure and better and more affordable housing can help shape the direction of the construction industry. The key will be anticipating and preparing for the shift, in part by developing new skills in the current and future workforce. This book presents all aspects of automation in construction pertaining to the use of information technologies in design, engineering, construction technologies, and maintenance and management of constructed facilities. The broad scope encompasses all stages of the construction life cycle from initial planning and design, through the construction of the facility, its operation, and maintenance, to the eventual dismantling and recycling of buildings and engineering structures. Features: Examines Building Information Management systems, allowing on-site execution of construction more efficient, and for project teams to eliminate mistakes and better coordinate the workforce Presents the latest information on the automation of modular construction, production in factories, including 3-D printing of components such as facades, or even load-bearing and essential components
Author: Sang Whan Han Publisher: MDPI ISBN: 3039432141 Category : Technology & Engineering Languages : en Pages : 190
Book Description
This Special Issue was created to collect the most recent and novel research on seismic performance evaluation of building structures. This issue includes three important topics on seismic engineering for building structures: (1) seismic design and performance evaluation, (2) structural dynamics, and (3) seismic hazard and risk analysis. To protect building structures from earthquakes, it is necessary to conduct seismic performance evaluations on structures with reliable methods and to retrofit these structures appropriately using the results of the seismic performance evaluation.
Author: David J. Miller
Author: David J. Miller
Author: Manish Shrikhande
Author: Antonio Concilio
Author: Hong Hao
Author: Rishi Gupta
Author: Raghu V. Prakash
Author: A. Rama Mohan Rao
Author: George C. Tsiatas
Author: Ehsan Noroozinejad Farsangi
Author: Sang Whan Han