Author: Publisher:
ISBN:
Category :
Languages : en
Pages : 20
Book Description
Development and Characterization of Laser-Induced Incandescence Towards Nanoparticle (Soot) Detection
Author: Development and Validation of an Experimental Apparatus for the Characterization of Soot in a Laminar Co-flow Diffusion Flame Using Laser-induced Incandescence
Author: Babak BorshanpourLaser Induced Incandescence and Laser Induced Breakdown Spectroscopy Based Sensor Development
Author: Kemal Efe EsellerPublisher:
ISBN:
Category : Incandescence
Languages : en
Pages :
Book Description
In this doctoral dissertation, two laser-based sensors were evaluated for different applications. Laser Induced Incandescence (LII) is a technique which can provide nonintrusive quantitative measurement of soot and it provides a unique diagnostic tool to characterize engine performance. Since LII is linearly proportional to the soot volume fraction, it can provide in situ, real time measurement of soot volume fraction with high temporal and spatial resolution. LII has the capability to characterize soot formation during combustion. The soot volume fraction from both flames and a soot generator was investigated with LII. The effects of experimental parameters, such as laser fluence, gate delay, gate width and various laser beam focusing, on LII signal was studied. Laser Induced Breakdown Spectroscopy (LIBS), a diagnostic tool for in situ elemental analysis, has been evaluated for on-line, simultaneous, multi-species impurity monitoring in hydrogen. LIBS spectra with different impurity levels of nitrogen, argon, and oxygen were recorded and the intensity of the spectral lines of Ar, O, N, and H observed were used to form calibration plots for impurities in hydrogen measurements. An ungated detection method for LIBS has been developed and applied to equivalence ratio measurements of CH4/air and biofuel/air. LIBS has also been used to quantitatively analyze the composition of a slurry sample. The quenching effect of water in slurry samples causes low LIBS signal quality with poor sensitivity. Univariate and multivariate calibration was performed on LIBS spectra of dried slurry samples for elemental analysis of Mg, Si and Fe. Calibration results show that the dried slurry samples give good correlation between spectral intensity and elemental concentration.
Characterization of Soot Particles in Laminar Diffusion by Laser-induced Incandescence
Author: Alexandre Dias FlügelPublisher:
ISBN: 9783945806135
Category :
Languages : en
Pages :
Book Description
Lizz Roman & Dancers Collection
Author: Publisher:
ISBN:
Category : Dance companies
Languages : en
Pages :
Book Description
Collection contains clipping and publicity files.
An Analytical and Quantitative Analysis of the Laser-induced Incandescence of Soot
Author: Richard Trent WainnerPublisher:
ISBN: 9780599716643
Category :
Languages : en
Pages : 0
Book Description
Quantitative Detection and Imaging of Soot Particles by Laser-induced Incandescence
Author: K. R. McManusSoot Analysis in Combustion Environments by Laser-induced Incandescence
Author: R. WainnerDevelopments in Surface Contamination and Cleaning, Volume 4
Author: Rajiv KohliPublisher: William Andrew
ISBN: 1437778844
Category : Technology & Engineering
Languages : en
Pages : 361
Book Description
In this series Rajiv Kohli and Kash Mittal have brought together the work of experts from different industry sectors and backgrounds to provide a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or handling the consequences of surface contamination. The expert contributions in this volume cover important fundamental aspects of surface contamination that are key to understanding the behavior of specific types of contaminants. This understanding is essential to develop preventative and mitigation methods for contamination control. The coverage complements the treatment of surface contamination in vol.1, Fundamental and Applied Aspects. This volume covers: Sources and Generation of Particles; Manipulation Techniques for Particles on Surfaces; Particle Deposition and Rebound; Particle Behavior in Liquid Systems; Biological and Metallic Contamination; and includes a comprehensive list of current standards and resources. Comprehensive coverage of innovations in surface contamination and cleaning Written by established experts in the contamination and cleaning field Each chapter is a comprehensive review of the state of the art Case studies included
Author: