Author: Donald Lee McAlpinPublisher:
ISBN:
Category :
Languages : en
Pages : 74
Book Description
Determination of Antimony, Tin, and Arsenic in High Antimonial Lead Alloys by Vacuum X-ray Fluorescence
Author: Donald Lee McAlpinMasters Theses in the Pure and Applied Sciences
Author: Wade H. ShaferPublisher: Springer Science & Business Media
ISBN: 147575776X
Category : Science
Languages : en
Pages : 299
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis, (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity was transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 19 (thesis year 1974) a total of 10,045 theses titles from 20 Canadian and 209 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 19 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.
Lead Abstracts
Author: The determination of arsenic, antimony and selenium in biological samples by an X-ray fluorescence technique
Author: Petronella Karen PsottaMetals Abstracts
Author: A New Method for the Separation of Tin, Arsenic and Antimony With Special Reference to Complex Alloys (Classic Reprint)
Author: William A. KutschPublisher: Forgotten Books
ISBN: 9780364869192
Category : Science
Languages : en
Pages : 28
Book Description
Excerpt from A New Method for the Separation of Tin, Arsenic and Antimony With Special Reference to Complex Alloys At the present time the manufacture of alloys is very extensive and tin and antimony are not only the chief constituents of various alloys, but form an important factor in other alloys. Copper and zinc can be mixed together within very wide limits to form the brasses. Copper and tin are alloyed to form bronzes, gun metals and bell metals. Alloys in which tin is the chief constituent are chiefly used for bearings and are commonly called Babbit metals. The metal originally consisted of 1 part of copper, 2 of antimony, and 6 of tin, but at present these constituents vary within wide limits and lead, iron, and zinc are also used. Britannia metal is a tin and antimony alloy. Lead is alloyed with antimony to form typemetals, and with arsenic to form shot metals. Perhaps the most important class of alloys is the bearing metals. Experience has shown that alloys of definite composition are best suited to certain purposes, and it has therefore become necessary to accurately determine the constituents of these metals. Various methods have been proposed for the analysis, the most practicable of which are the following. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
A New Method for the Separation and Determination of Tin, Arsenic and Antimony
Author: Carl F. HagedornPublisher:
ISBN:
Category : Antimony
Languages : en
Pages : 46
Book Description
Arsenic Determination by the Silver Diethyldithiocarbamate Method and the Elimination of Metal Ion Interferences
Author: Shingara S. SandhuPublisher:
ISBN:
Category : Arsenic
Languages : en
Pages : 44
Book Description
Several metal ions--chromium, cobalt, copper, mercury, molybdenum, and antimony--have been reported to interfere in the determination of arsenic in water and waste water by the Silver Diethyldithiocarbamate (SDDC) method, but the limit of interference by each ion has never been precisely evaluated. Conflicting reports have also appeared in the literature on the role of chromium and antimony as interfering ions in this method. The present study was undertaken to resolve the confusion that surrounds the use of the SDDC method for the determination of arsenic in water and waste water.
The Separation of the Sub-Group Arsenic, Antimony and Tin from the Sulphide Group of Elements (Classic Reprint)
Author: Leo A. MautnerPublisher: Forgotten Books
ISBN: 9780265833278
Category : Science
Languages : en
Pages : 42
Book Description
Excerpt from The Separation of the Sub-Group Arsenic, Antimony and Tin From the Sulphide Group of Elements The science and art of making alloys dates back to the days of ancient history. The Greeks and Romans made bronzes and amalgams but they had only a few metals for compounding, such as tin, gold, copper, iron, silver and mercury. As the other metals came into use, more combinations were possible until today there are almost numberless alloys having different constitution and properties. The effects of varying amounts of certain metals were studied and at the present time we know what properties certain metals have and what properties they will give to alloys in which they are used. Some increase or decrease the specific gravity, others the hardness, others the ductility, others the conductivity, others the resistance to corrosion by weathering and acids, etc. There is a very important group of alloys such as brasses, bronzes, * gun metals, bell metals, babbitts, type metals. Solders, Brittania metal, etc. These contain chiefly copper, lead, tin and antimony, with some other metals such as nickel, iron, cobalt, aluminum, and zinc. A variation, in small amounts of any of these metals may produce a large change in the property of the alloy so that it becomes important to have an accurate analysis of the alloy in question. It is expedient therefore, to have a method of analysis which is accurate, speedy and simple for use in industrial laboratories where a knowledge of the exact composition is essential. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
The Separation and Determination of Tin, Arsenic and Antimony
Author: Erwin Howard BerryPublisher:
ISBN:
Category : Antimony
Languages : en
Pages : 26
Book Description