Designer's Guide to EN 1998-1 and 1998-5 PDF Download

Author: Michael N Fardis
Publisher: Thomas Telford Limited
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 304

View

Book Description
Covers EN1998-1 (General Rules, seismic actions and rules for buildings) and EN1998-5 (Foundations, retaining structures, geotechnical aspects). This book is useful for Civil and Structural Engineers, Code-drafting committees, Clients, Structural Design students, and Public authorities.

Author: Basil Kolias
Publisher: Inst of Civil Engineers Pub
ISBN: 9780727757357
Category : Technology & Engineering
Languages : en
Pages : 258

View

Book Description
This guide focuses specifically on EN 1998-2 (Eurocode 8. Part 2 Bridges), the design standard for use in the seismic design of bridges in which horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; however it can also be applied to the seismic design of cable-stayed and arched bridges.

Author: Andrew W Beeby
Publisher: Thomas Telford
ISBN: 9780727731050
Category : Business & Economics
Languages : en
Pages : 240

View

Book Description
Applies to the design of building and civil engineering structures in plain, reinforced and pre-stressed concrete. The code (for convenience referred to as EC2) is written in several parts: EN 1992 - 1 - 1; EN 1992 - 1 - 2; EN 1992 - 2; and EN 1992 - 3.

Author: Roger Frank
Publisher: Thomas Telford
ISBN: 9780727731548
Category : Design
Languages : en
Pages : 244

View

Book Description
This book describes and explains the many features of ground engineering that require special design attention to ensure safety and adequate performance. It is useful for civil and structural engineers code-drafting committees; clients; structural-design students and public authorities.

Author: Tom Lennon
Publisher: Thomas Telford
ISBN: 9780727731579
Category : Architecture
Languages : en
Pages : 152

View

Book Description
A guide to 4 documents, EN1991 Part 1.2, EN1992 Part 1.2, EN1993 Part 1.2 and EN1994 Part 1.2. It provides an introduction to the procedures required to achieve design solutions for a typical range of structural elements and assemblies. Worked examples are included to illustrate the use of the Eurocodes for specific design scenarios.

Author: Chris R Hendy
Publisher: Thomas Telford
ISBN: 9780727731616
Category : Business & Economics
Languages : en
Pages : 230

View

Book Description
EN 1994-2 is one standard of the Eurocode suite & describes the principles & requirements for safety, serviceability & durability of composite steel & concrete bridges. This guide provides the user with guidance on the interpretation & use of EN 1994-2 through worked examples in relation to the general rules & the rules for bridges.

Author: Chris R Hendy
Publisher: Thomas Telford
ISBN: 9780727731593
Category : Technology & Engineering
Languages : en
Pages : 410

View

Book Description
Annotation - Basis of design - Materials - Durability - Structural analysis - Ultimate limit states - Serviceability limit states - Detailing of reinforcement and prestressing tendons - Detailing for members and particular rules - Additional rules for precast concrete structures - Design for the execution stages.

Author: Michael Fardis
Publisher: CRC Press
ISBN: 1482282534
Category : Technology & Engineering
Languages : en
Pages : 414

View

Book Description
An Original Source of Expressions and Tools for the Design of Concrete Elements with EurocodeSeismic design of concrete buildings needs to be performed to a strong and recognized standard. Eurocode 8 was introduced recently in the 30 countries belonging to CEN, as part of the suite of Structural Eurocodes, and it represents the first European Stand

Author: Michael N. Fardis
Publisher: Springer Science & Business Media
ISBN: 1402098421
Category : Technology & Engineering
Languages : en
Pages : 757

View

Book Description
Reflecting the historic first European seismic code, this professional book focuses on seismic design, assessment and retrofitting of concrete buildings, with thorough reference to, and application of, EN-Eurocode 8. Following the publication of EN-Eurocode 8 in 2004-05, 30 countries are now introducing this European standard for seismic design, for application in parallel with existing national standards (till March 2010) and exclusively after that. Eurocode 8 is also expected to influence standards in countries outside Europe, or at the least, to be applied there for important facilities. Owing to the increasing awareness of the threat posed by existing buildings substandard and deficient buildings and the lack of national or international standards for assessment and retrofitting, its impact in that field is expected to be major. Written by the lead person in the development of the EN-Eurocode 8, the present handbook explains the principles and rationale of seismic design according to modern codes and provides thorough guidance for the conceptual seismic design of concrete buildings and their foundations. It examines the experimental behaviour of concrete members under cyclic loading and modelling for design and analysis purposes; it develops the essentials of linear or nonlinear seismic analysis for the purposes of design, assessment and retrofitting (especially using Eurocode 8); and gives detailed guidance for modelling concrete buildings at the member and at the system level. Moreover, readers gain access to overviews of provisions of Eurocode 8, plus an understanding for them on the basis of the simple models of the element behaviour presented in the book. Also examined are the modern trends in performance- and displacement-based seismic assessment of existing buildings, comparing the relevant provisions of Eurocode 8 with those of new US prestandards, and details of the most common and popular seismic retrofitting techniques for concrete buildings and guidance for retrofitting strategies at the system level. Comprehensive walk-through examples of detailed design elucidate the application of Eurocode 8 to common situations in practical design. Examples and case studies of seismic assessment and retrofitting of a few real buildings are also presented. From the reviews: "This is a massive book that has no equal in the published literature, as far as the reviewer knows. It is dense and comprehensive and leaves nothing to chance. It is certainly taxing on the reader and the potential user, but without it, use of Eurocode 8 will be that much more difficult. In short, this is a must-read book for researchers and practitioners in Europe, and of use to readers outside of Europe too. This book will remain an indispensable backup to Eurocode 8 and its existing Designers’ Guide to EN 1998-1 and EN 1998-5 (published in 2005), for many years to come. Congratulations to the author for a very well planned scope and contents, and for a flawless execution of the plan". AMR S. ELNASHAI "The book is an impressive source of information to understand the response of reinforced concrete buildings under seismic loads with the ultimate goal of presenting and explaining the state of the art of seismic design. Underlying the contents of the book is the in-depth knowledge of the author in this field and in particular his extremely important contribution to the development of the European Design Standard EN 1998 - Eurocode 8: Design of structures for earthquake resistance. However, although Eurocode 8 is at the core of the book, many comparisons are made to other design practices, namely from the US and from Japan, thus enriching the contents and interest of the book". EDUARDO C. CARVALHO

Author: H. Gulvanessian
Publisher: Thomas Telford
ISBN: 9780727730114
Category : Technology & Engineering
Languages : en
Pages : 220

View

Book Description
- General - Requirements - Principles of limit state design - Basic variables - Structural analysis and design assisted by testing - Verification by the partial factor method - Annex A1 (normative) - Application for buildings - Management of structural reliability for construction works - Basis for partial factor design and reliability analysis - Design assisted by testing - Appendix A: The Construction Products Directive (89/106/EEC) - Appendix B: The Eurocode Suite - Appendix C: Basic statistical terms and techniques - Appendix D: National standard organizations