Author: R. J. FavorPublisher:
ISBN:
Category : Airplanes
Languages : en
Pages : 68
Book Description
Design Information on 5Cr-Mo-V Alloy Steels (H-11 and 5Cr-Mo-V Aircraft Steel) for Aircraft and Missiles
Author: R. J. FavorPublisher:
ISBN:
Category : Airplanes
Languages : en
Pages : 68
Book Description
Availability and Mechanical Properties of High-strength Steel Extrusions
Author: Robert John FiorentinoPublisher:
ISBN:
Category : Steel
Languages : en
Pages : 66
Book Description
Design Considerations in Selecting Materials for Large Solid-propellant Rocket-motor Cases
Author: Charles Wesley BertPublisher:
ISBN:
Category : Heat resistant alloys
Languages : en
Pages : 80
Book Description
The Welding and Brazing of Alloy 718
Author: Robert Melvin EvansPublisher:
ISBN:
Category : Nickel alloys
Languages : en
Pages : 30
Book Description
Because of a special interest in Alloy 718, the Defense Metals Information Center has summarized information on the welding and brazing of the alloy. Two principal resons for the interest in this alloy are its good formability and its good weldability, expecially under restraint. The greater portion of the fusion welding of Alloy 718 has been done by the gas tungsten-arc (TIG) process. A discussion of welding atmosphere, filler metals, heat treatment of welds, welding under restraint, and weld toughness is presented in the section on fusion welding. Information is also presented on resistance welding and electron-beam welding of Alloy 718. The final section of this report deals with the brazing of Alloy 718.
Titanium-alloy Forgings
Author: H. J. HenningPublisher:
ISBN:
Category : Titanium
Languages : en
Pages : 96
Book Description
Physical and Mechanical Properties of Commercial Molybdenum-base Alloys
Author: J. A. HouckPublisher:
ISBN:
Category : Molybdenum
Languages : en
Pages : 196
Book Description
Structural Considerations in Developing Refractory Metal Alloys
Author: R. I. JaffeePublisher:
ISBN:
Category : Fracture mechanics
Languages : en
Pages : 36
Book Description
Progress made in applying advanced techniques and structural concepts to the problem of strengthening the Group VI-A metals, Cr, Mo, and W, is examined. At low temperatures, T/Tm
A Review of Bending Methods for Stainless Steel Tubing
Author: C. T. OlofsonPublisher:
ISBN:
Category : Stainless steel
Languages : en
Pages : 66
Book Description
Cracking in High-strength Steel Weldments
Author: P. A. KammerPublisher:
ISBN:
Category : Steel
Languages : en
Pages : 132
Book Description
Weldment cracking is a broad complex field. Even if one considers only cracking of steel weldments, the problems range from cracking at temperatures near the solidus during welding to cracking at room temperature days, weeks, or months after welding is completed. Numerous reports of investigations in this field are contained in the published and unpublished literature. However, most of these reports cover only a particular problem in a specific area of the broad field of weldment cracking. This review attempts to cover the major aspects of the entire field of weldment cracking. Necessarily, the review is for the most part general, only being specific in a few instances to illustrate a point. (Author).
Hot-cold Working of Steel to Improve Strength
Author: Charles W. MarschallPublisher:
ISBN:
Category : Steel
Languages : en
Pages : 88
Book Description