Design and Synthesis Techniques for Reconfigurable Microwave Filters Using Single and Dual-mode Resonators PDF Download

Author: Cesar A. Lugo (Jr)
Publisher:
ISBN: 9788390498409
Category :
Languages : en
Pages : 115

View

Book Description
This thesis discusses the investigation and development of design methodologies for the creation of multi-functional bandpass filters at microwave frequencies. These filters are capable of tuning to different frequency bands as well as varying their fractional bandwidth. The research also studies polynomial synthesis procedures as a tool for the derivation of reconfigurable planar filters with advanced asymmetrical responses.

Author: Richard J. Cameron
Publisher: John Wiley & Sons
ISBN: 1118274342
Category : Technology & Engineering
Languages : en
Pages : 928

View

Book Description
An in-depth look at the state-of-the-art in microwave filter design, implementation, and optimization Thoroughly revised and expanded, this second edition of the popular reference addresses the many important advances that have taken place in the field since the publication of the first edition and includes new chapters on Multiband Filters, Tunable Filters and a chapter devoted to Practical Considerations and Examples. One of the chief constraints in the evolution of wireless communication systems is the scarcity of the available frequency spectrum, thus making frequency spectrum a primary resource to be judiciously shared and optimally utilized. This fundamental limitation, along with atmospheric conditions and interference have long been drivers of intense research and development in the fields of signal processing and filter networks, the two technologies that govern the information capacity of a given frequency spectrum. Written by distinguished experts with a combined century of industrial and academic experience in the field, Microwave Filters for Communication Systems: Provides a coherent, accessible description of system requirements and constraints for microwave filters Covers fundamental considerations in the theory and design of microwave filters and the use of EM techniques to analyze and optimize filter structures Chapters on Multiband Filters and Tunable Filters address the new markets emerging for wireless communication systems and flexible satellite payloads and A chapter devoted to real-world examples and exercises that allow readers to test and fine-tune their grasp of the material covered in various chapters, in effect it provides the roadmap to develop a software laboratory, to analyze, design, and perform system level tradeoffs including EM based tolerance and sensitivity analysis for microwave filters and multiplexers for practical applications. Microwave Filters for Communication Systems provides students and practitioners alike with a solid grounding in the theoretical underpinnings of practical microwave filter and its physical realization using state-of-the-art EM-based techniques.

Author: Richard J. Cameron
Publisher: Wiley-Interscience
ISBN: 9780471450221
Category : Technology & Engineering
Languages : en
Pages : 816

View

Book Description
There have been significant advances in the synthesis and physical realization of microwave filter networks over the last three decades. This book provides a coherent and readable description of system requirements and constraints for microwave filters, fundamental considerations in the theory and design of microwave filters, up-to-date modern synthesis techniques with examples and technology considerations in the choice of hardware.

Author: Pierre Jarry
Publisher: John Wiley & Sons
ISBN: 047048781X
Category : Technology & Engineering
Languages : en
Pages : 208

View

Book Description
An in-depth survey of the design and REALIZATIONS of miniaturized fractal microwave and RF filters Engineers are continually searching for design methods that can satisfy the ever-increasing demand for miniaturization, accuracy, reliability, and fast development time. Design and Realizations of Miniaturized Fractal RF and Microwave Filters provides RF and microwave engineers and researchers, advanced graduate students, and wireless and telecommunication engineers with the knowledge and skills to design and realize miniaturized fractal microwave and RF filters. This book is an essential resource for the realization of portable and cellular phones, WiFi, 3G and 4G, and satellite networks. The text focuses on the synthesis and fabrication of miniaturized fractal filters with symmetrical and asymmetrical frequency characteristics in the C, X and Ku bands, though applications to other frequency bands are considered. Readers will find helpful guidance on: Miniaturized filters in bilevel fashion Simplified methods for the synthesis of pseudo-elliptic electrical networks Methods for extracting coupling coefficients and external quality factors from simulations of the RF/microwave structure Methods for matching theoretical couplings to couplings of structure Including studies of the real-world performance of fractal resonators and sensitivity analyses of suspended substrate realizations, this is a definitive resource for both practicing engineers and students who need timely insight on fractal resonators for compact and low-power microwave and RF applications.

Author: Pierre Jarry
Publisher: John Wiley & Sons
ISBN: 0470294167
Category : Technology & Engineering
Languages : en
Pages : 443

View

Book Description
The fundamentals needed to design and realize microwave and RF filters. Microwave and RF filters play an important role in communication systems and, owing to the proliferation of radar, satellite, and mobile wireless systems, there is a need for design methods that can satisfy the ever-increasing demand for accuracy, reliability, and shorter development times. Beginning with a brief review of scattering and chain matrices, filter approximations and synthesis, waveguides and transmission lines, and fundamental electromagnetic equations, the book then covers design techniques for microwave and RF filters operating across a frequency range from 1 GHz to 35 GHz. Each design chapter: Is dedicated to only one filter and is organized by the type of filter response Provides several design examples, including the analysis and modeling of the structures discussed and the methodologies employed Offers practical information on the actual performance of the filters and common difficulties encountered during construction Concludes with the construction technique, pictures of the inside and outside of the filter, and the measured performances Advanced Design Techniques and Realizations of Microwave and RF Filters is an essential resource for wireless and telecommunication engineers, as well as for researchers interested in current microwave and RF filter design practices. It is also appropriate as a supplementary textbook for advanced undergraduate courses in filter design.

Author: Ferran Martín
Publisher: John Wiley & Sons
ISBN: 1119237629
Category : Technology & Engineering
Languages : en
Pages : 690

View

Book Description
This book presents and discusses strategies for the design and implementation of common-mode suppressed balanced microwave filters, including, narrowband, wideband, and ultra-wideband filters This book examines differential-mode, or balanced, microwave filters by discussing several implementations of practical realizations of these passive components. Topics covered include selective mode suppression, designs based on distributed and semi-lumped approaches, multilayer technologies, defect ground structures, coupled resonators, metamaterials, interference techniques, and substrate integrated waveguides, among others. Divided into five parts, Balanced Microwave Filters begins with an introduction that presents the fundamentals of balanced lines, circuits, and networks. Part 2 covers balanced transmission lines with common-mode noise suppression, including several types of common-mode filters and the application of such filters to enhance common-mode suppression in balanced bandpass filters. Next, Part 3 examines wideband and ultra-wideband (UWB) balanced bandpass filters with intrinsic common-mode suppression. Narrowband and dual-band balanced bandpass filters with intrinsic common-mode suppression are discussed in Part 4. Finally, Part 5 covers other balanced circuits, such as balanced power dividers and combiners, and differential-mode equalizers with common-mode filtering. In addition, the book: Explores a research topic of increasing interest due to the growing demand of balanced transmission lines and circuits in modern communication systems Includes contributions from prominent worldwide experts in the field Provides readers with the necessary knowledge to analyze and synthesize balanced filters and circuits Balanced Microwave Filters is an important text for R&D engineers, professionals, and specialists working on the topic of microwave filters. Post graduate students and Masters students in the field of microwave engineering and wireless communications, especially those involved in courses related to microwave filters, and balanced filters and circuits will also find it to be a vital resource.

Author: Mahmoud Wahby
Publisher:
ISBN:
Category :
Languages : en
Pages : 148

View

Book Description
This thesis describes the synthesis and design of two novel dual-mode microwave waveguide filter structures. The mode degeneracy is fundamental to this design technique. The first design introduces a structurally symmetric dual-mode cavity pseudo-elliptic band-pass filter, which has been implemented by only asymmetric structures so far. It is also used to shed light on the concepts of positive and negative coupling in dual-mode filters. A novel iris coupling structure is investigated allowing negative coupling coefficients required for certain polarizations of modes in dual- mode rectangular cavities. A 4th order dual-mode band-pass filter is designed at 11 GHz with a bandwidth of 200 MHz, an in-band return loss of 20dB and two transmission zeros at normalized frequencies of ±1.6. The filter makes use of the negative coupling property of the iris for inter-resonance coupling of the modes of horizontal orientation inside the cavity. The desired performance of the filter was achieved by the initial design without any optimization. The second design is especially convenient when temperature compensation is of prime concern. A direct design technique is developed and demonstrated with computer simulation and measurement in circular waveguide technology on a 4th order filter with a bandwidth of 50 MHz at 11 GHz, an in-band return loss of 20 dB and two normalized transmission zeros at ±1.5.

Author: Ian Hunter
Publisher: IET
ISBN: 9780852967775
Category : Science
Languages : en
Pages : 372

View

Book Description
A textbook for graduate and advanced undergraduate students introducing microwave filter design and the circuit theory and network synthesis that are necessary to it. A variety of design theories are presented followed by specific examples with numerical simulations of the designs and when possible pictures of real devices. c. Book News Inc.

Author: Lei Zhu
Publisher: John Wiley & Sons
ISBN: 1118197976
Category : Technology & Engineering
Languages : en
Pages : 184

View

Book Description
This book will appeal to scientists and engineers who are concerned with the design of microwave wideband devices and systems. For advanced (ultra)-wideband wireless systems, the necessity and design methodology of wideband filters will be discussed with reference to the inherent limitation in fractional bandwidth of classical bandpass filters. Besides the detailed working principles, a large number of design examples are demonstrated, which can be easily followed and modified by the readers to achieve their own desired specifications. Therefore, this book is of interest not only to students and researchers from academia, but also to design engineers in industry. With the help of complete design procedures and tabulated design parameters, even those with little filter design experience, will find this book to be a useful design guideline and reference, which can free them from tedious computer-aided full-wave electromagnetic simulations. Among different design proposals, wideband bandpass filters based on the multi-mode resonator have demonstrated many unparalleled attractive features, including a simple design methodology, compact size, low loss and good linearity in the wide passband, enhanced out-of-band rejection, and easy integration with other circuits/antennas. A conventional bandpass filter works under single dominant resonant modes of a few cascaded transmission line resonators and its operating bandwidth is widened via enhanced coupling between the adjacent resonators. However, this traditional approach needs an extremely high coupling degree of coupled-lines while producing a narrow upper stopband between the dominant and harmonic bands. As a sequence, the desired dominant passband is restricted to an extent less than 60% in fractional bandwidth. To circumvent these issues and break with the tradition, a filter based on the multiple resonant modes was initially introduced in 2000 by the first author of this book. Based on this novel concept, a new class of wideband filters with fractional bandwidths larger than 60% has been successfully developed so far. This book, presents and characterizes a variety of multi-mode resonators with stepped-impedance or loaded-stub configurations using the matured transmission line theory for development of advanced microwave wideband filters.

Author: Protap Pramanick
Publisher: Artech House
ISBN: 1630813826
Category : Technology & Engineering
Languages : en
Pages : 437

View

Book Description
This authoritative resource presents current practices for the design of RF and microwave filters. This one-stop reference provides readers with essential and practical information in order to design their own filter design software package, ultimately saving time and money. Essential building blocks for each type of filter are presented including network theory, transmission lines, and coupling mechanisms. This book presents a detailed discussion of the Low Pass Filter prototype, which is then extended to other configurations such as high pass, band pass, band stop, diplexers, and multiplexers. Microwave Network Theory and Transmission Line Coupling Mechanisms are presented along with a comprehensive discussion of the characteristics of commonly used transmission lines such as waveguides, Striplines, and Microstrip lines. Numerous design examples are presented to demonstrate an inclusive design methodology.