Author: Nicholas LiCausi
Publisher:
ISBN:
Category :
Languages : en
Pages : 230
Book Description
Design and Fabrication of a Novel Self-powered Solid-state Neutron Detector
Fabrication and Characterization of a Novel Self-powered Solid-state Neutron Detector
Characterization of a Novel Self-powered Solid-state Neutron Detector
Optimization and Characterization of a Novel Self Powered Solid State Neutron Detector
Fabrication of Cost-effective Solid-state Neutron Detectors and Characterization
The Development of a Novel Diamond-based Neutron Detector and Quantum Color Center Fabrication Framework
Author: Henry Matthew Thurston
Publisher:
ISBN:
Category : Electronic dissertations
Languages : en
Pages : 0
Book Description
This work investigates the use of single crystal diamond in sensing technologies. First, homoepitaxial chemical vapor deposition (CVD) grown semiconducting diamond is used to build an ultra-fast neutron detector. Diamond based neutron detectors are extant technology, but typically limited to neutron energies of less than 14 MeV. This work introduces the Positionally Opposed Schottky Semi-Metal (POSSM) solid state neutron detector. The POSSM device employs two boron-doped P-type semiconducting diamonds in conjunction with a lanthanide foil to create a pair of Schottky junction diodes with a shared cathode. Under reverse bias the diamond-Schottky diodes have undetectable reverse bias leakage current, resulting in a detector with excellent signal-to-noise properties. Preamplifier circuitry has been designed to exploit the favorable properties of the Schottky architecture. Field testing of the device at the Los Alamos Neutron Science Center (LANSCE) yielded successful ultra-fast neutron detection with excellent charge conversion efficiency. Several drawbacks were identified in the performance of the POSSM detector, mainly involving durability of the diodes and speed of the preamplifier. An improved design was developed and is presented in this work, though the improved design has not been built.Secondly, this work presents a novel framework for the simulation of quantum color center formation in diamond. Diamond color centers have been shown to have unique quantum spin properties making them of interest to quantum computing and field sensing. A mesoscale reaction-diffusion framework is developed and a computational solver is built. The Color Center ANnealing And Reaction-Diffusion (CCANARD) program solves the nonlinear reaction-diffusion system by linearization using the Gateaux Derivative and the Crank-Nicolson method. CCANARD is benchmarked for computational efficiency and accuracy. The results are presented and analyzed. An experiment is proposed to further test and develop CCANARD.
Publisher:
ISBN:
Category : Electronic dissertations
Languages : en
Pages : 0
Book Description
This work investigates the use of single crystal diamond in sensing technologies. First, homoepitaxial chemical vapor deposition (CVD) grown semiconducting diamond is used to build an ultra-fast neutron detector. Diamond based neutron detectors are extant technology, but typically limited to neutron energies of less than 14 MeV. This work introduces the Positionally Opposed Schottky Semi-Metal (POSSM) solid state neutron detector. The POSSM device employs two boron-doped P-type semiconducting diamonds in conjunction with a lanthanide foil to create a pair of Schottky junction diodes with a shared cathode. Under reverse bias the diamond-Schottky diodes have undetectable reverse bias leakage current, resulting in a detector with excellent signal-to-noise properties. Preamplifier circuitry has been designed to exploit the favorable properties of the Schottky architecture. Field testing of the device at the Los Alamos Neutron Science Center (LANSCE) yielded successful ultra-fast neutron detection with excellent charge conversion efficiency. Several drawbacks were identified in the performance of the POSSM detector, mainly involving durability of the diodes and speed of the preamplifier. An improved design was developed and is presented in this work, though the improved design has not been built.Secondly, this work presents a novel framework for the simulation of quantum color center formation in diamond. Diamond color centers have been shown to have unique quantum spin properties making them of interest to quantum computing and field sensing. A mesoscale reaction-diffusion framework is developed and a computational solver is built. The Color Center ANnealing And Reaction-Diffusion (CCANARD) program solves the nonlinear reaction-diffusion system by linearization using the Gateaux Derivative and the Crank-Nicolson method. CCANARD is benchmarked for computational efficiency and accuracy. The results are presented and analyzed. An experiment is proposed to further test and develop CCANARD.
Advanced Microstructured Semiconductor Neutron Detectors
Author: Steven Lawrence Bellinger
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The microstructured semiconductor neutron detector (MSND) was investigated and previous designs were improved and optimized. In the present work, fabrication techniques have been refined and improved to produce three-dimensional microstructured semiconductor neutron detectors with reduced leakage current, reduced capacitance, highly anisotropic deep etched trenches, and increased signal-to-noise ratios. As a result of these improvements, new MSND detection systems function with better gamma-ray discrimination and are easier to fabricate than previous designs. In addition to the microstructured diode fabrication improvement, a superior batch processing backfill-method for 6LiF neutron reactive material, resulting in a nearly-solid backfill, was developed. This method incorporates a LiF nano-sizing process and a centrifugal batch process for backfilling the nanoparticle LiF material. To better transition the MSND detector to commercialization, the fabrication process was studied and enhanced to better facilitate low cost and batch process MSND production. The research and development of the MSND technology described in this work includes fabrication of variant microstructured diode designs, which have been simulated through MSND physics models to predict performance and neutron detection efficiency, and testing the operational performance of these designs in regards to neutron detection efficiency, gamma-ray rejection, and silicon fabrication methodology. The highest thermal-neutron detection efficiency reported to date for a solid-state semiconductor detector is presented in this work. MSNDs show excellent neutron to gamma-ray (n/[gamma]) rejection ratios, which are on the order of 106, without significant loss in thermal-neutron detection efficiency. Individually, the MSND is intrinsically highly sensitive to thermal neutrons, but not extrinsically sensitive because of their small size. To improve upon this, individual MSNDs were tiled together into a 6x6-element array on a single silicon chip. Individual elements of the array were tested for thermal-neutron detection efficiency and for the n/[gamma] reject ratio. Overall, because of the inadequacies and costs of other neutron detection systems, the MSND is the premier technology for many neutron detection applications.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The microstructured semiconductor neutron detector (MSND) was investigated and previous designs were improved and optimized. In the present work, fabrication techniques have been refined and improved to produce three-dimensional microstructured semiconductor neutron detectors with reduced leakage current, reduced capacitance, highly anisotropic deep etched trenches, and increased signal-to-noise ratios. As a result of these improvements, new MSND detection systems function with better gamma-ray discrimination and are easier to fabricate than previous designs. In addition to the microstructured diode fabrication improvement, a superior batch processing backfill-method for 6LiF neutron reactive material, resulting in a nearly-solid backfill, was developed. This method incorporates a LiF nano-sizing process and a centrifugal batch process for backfilling the nanoparticle LiF material. To better transition the MSND detector to commercialization, the fabrication process was studied and enhanced to better facilitate low cost and batch process MSND production. The research and development of the MSND technology described in this work includes fabrication of variant microstructured diode designs, which have been simulated through MSND physics models to predict performance and neutron detection efficiency, and testing the operational performance of these designs in regards to neutron detection efficiency, gamma-ray rejection, and silicon fabrication methodology. The highest thermal-neutron detection efficiency reported to date for a solid-state semiconductor detector is presented in this work. MSNDs show excellent neutron to gamma-ray (n/[gamma]) rejection ratios, which are on the order of 106, without significant loss in thermal-neutron detection efficiency. Individually, the MSND is intrinsically highly sensitive to thermal neutrons, but not extrinsically sensitive because of their small size. To improve upon this, individual MSNDs were tiled together into a 6x6-element array on a single silicon chip. Individual elements of the array were tested for thermal-neutron detection efficiency and for the n/[gamma] reject ratio. Overall, because of the inadequacies and costs of other neutron detection systems, the MSND is the premier technology for many neutron detection applications.
Neutron Detector and Fabrication Method Thereof
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
A neutron detector and a method for fabricating a neutron detector. The neutron detector includes a photodetector, and a solid-state scintillator operatively coupled to the photodetector. In one aspect, the method for fabricating a neutron detector includes providing a photodetector, and depositing a solid-state scintillator on the photodetector to form a detector structure.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
A neutron detector and a method for fabricating a neutron detector. The neutron detector includes a photodetector, and a solid-state scintillator operatively coupled to the photodetector. In one aspect, the method for fabricating a neutron detector includes providing a photodetector, and depositing a solid-state scintillator on the photodetector to form a detector structure.
Design of Solid State Neutron Detectors Using Geant4 Simulation
Author: Manoj Kumar Parida
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 0
Book Description
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 0
Book Description
Development of A Self Biased High Efficiency Solid-State Neutron Detector for MPACT Applications
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Neutron detection is an important aspect of materials protection, accounting, and control for transmutation (MPACT). Currently He-3 filled thermal neutron detectors are utilized in many applications; these detectors require high-voltage bias for operation, which complicates the system when multiple detectors are used. In addition, due to recent increase in homeland security activity and the nuclear renaissance, there is a shortage of He-3, and these detectors become more expensive. Instead, cheap solid-state detectors that can be mass produced like any other computer chips will be developed. The new detector does not require a bias for operation, has low gamma sensitivity, and a fast response. The detection system is based on a honeycomb-like silicon device, which is filled with B-10 as the neutron converter; while a silicon p-n diode (i.e., solar cell type device) formed on the thin silicon wall of the honeycomb structure detects the energetic charged particles emitted from the B-10 conversion layer. Such a detector has ~40% calculated thermal neutron detection efficiency with an overall detector thickness of about 200?m. Stacking of these devices allows over 90% thermal neutron detection efficiency. The goal of the proposed research is to develop a high-efficiency, low-noise, self-powered solid-state neutron detector system based on the promising results of the existing research program. A prototype of this solid-state neutron detector system with sufficient detector size (up to 8-inch diam., but still portable and inexpensive) and integrated with interface electronics (e.g., preamplifier) will be designed, fabricated, and tested as a coincidence counter for MPACT applications. All fabrications proposed are based on silicon-compatible processing; thus, an extremely cheap detector system could be massively produced like any other silicon chips. Such detectors will revolutionize current neutron detection systems by providing a solid-state alternative to traditional gas-based neutron detectors.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Neutron detection is an important aspect of materials protection, accounting, and control for transmutation (MPACT). Currently He-3 filled thermal neutron detectors are utilized in many applications; these detectors require high-voltage bias for operation, which complicates the system when multiple detectors are used. In addition, due to recent increase in homeland security activity and the nuclear renaissance, there is a shortage of He-3, and these detectors become more expensive. Instead, cheap solid-state detectors that can be mass produced like any other computer chips will be developed. The new detector does not require a bias for operation, has low gamma sensitivity, and a fast response. The detection system is based on a honeycomb-like silicon device, which is filled with B-10 as the neutron converter; while a silicon p-n diode (i.e., solar cell type device) formed on the thin silicon wall of the honeycomb structure detects the energetic charged particles emitted from the B-10 conversion layer. Such a detector has ~40% calculated thermal neutron detection efficiency with an overall detector thickness of about 200?m. Stacking of these devices allows over 90% thermal neutron detection efficiency. The goal of the proposed research is to develop a high-efficiency, low-noise, self-powered solid-state neutron detector system based on the promising results of the existing research program. A prototype of this solid-state neutron detector system with sufficient detector size (up to 8-inch diam., but still portable and inexpensive) and integrated with interface electronics (e.g., preamplifier) will be designed, fabricated, and tested as a coincidence counter for MPACT applications. All fabrications proposed are based on silicon-compatible processing; thus, an extremely cheap detector system could be massively produced like any other silicon chips. Such detectors will revolutionize current neutron detection systems by providing a solid-state alternative to traditional gas-based neutron detectors.