Author: United States. Defense Science Board. Task Force on Engineering in the Manufacturing Process
Publisher: DIANE Publishing
ISBN: 1428982973
Category : Manufacturing processes
Languages : en
Pages : 171
Book Description
Defense Science Board task force report engineering in the manufacturing process
Author: United States. Defense Science Board. Task Force on Engineering in the Manufacturing Process
Publisher: DIANE Publishing
ISBN: 1428982973
Category : Manufacturing processes
Languages : en
Pages : 171
Book Description
Publisher: DIANE Publishing
ISBN: 1428982973
Category : Manufacturing processes
Languages : en
Pages : 171
Book Description
Defense Science Board Task Force Report
Defense Science Board Task Force Report Engineering in The Manufacturing Process
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 172
Book Description
This report presents the recommendations of the Defense Science Board (DSB) Summer Study Task Force on Engineering in the Manufacturing Process. The terms of reference (TOR) for this Task Force represent a logical continuation of DSB manufacturing studies performed in prior years, particularly in the areas of integrated product and process development (IPPD)2and dual-use-manufacturing. In this study, however, the primary focus is on Science and Technology (S AND T) and the application of IPPD and dual-use concepts even earlier than previous studies have recommended. During its study, the Task Force addressed engineering and manufacturing management and technology approaches that can be used to achieve a better product and process balance in the S AND T phase, which precedes the formal acquisition process, and that result in both unit production and total life cycle cost reduction. It chose S AND T "exit criteria" and metrics as the means to demonstrate process as well as performance capability during the S AND T phase and to reduce downstream acquisition risks. The Task Force also examined a key enabler of IPPD and manufacturing enterprise control-advanced modeling and simulation technology. The work in this area by this Task Force relates to the work of another DSB Summer Study that specifically addressed simulation, the Readiness, Simulation, and Prototyping Task Force. The expanded use of best commercial products, practices, and manufacturing capabilities was also considered as an additional way to meet the Department of Defense (DOD) future needs for rapid transition to production and economic low-volume manufacturing. As a result of its deliberations, the Task Force developed specific recommendations for experiments to be conducted within S AND T Advanced Technology Demonstrations (ATDs) to validate the benefits of the new recommended approaches to S AND T contained in this report.
Publisher:
ISBN:
Category :
Languages : en
Pages : 172
Book Description
This report presents the recommendations of the Defense Science Board (DSB) Summer Study Task Force on Engineering in the Manufacturing Process. The terms of reference (TOR) for this Task Force represent a logical continuation of DSB manufacturing studies performed in prior years, particularly in the areas of integrated product and process development (IPPD)2and dual-use-manufacturing. In this study, however, the primary focus is on Science and Technology (S AND T) and the application of IPPD and dual-use concepts even earlier than previous studies have recommended. During its study, the Task Force addressed engineering and manufacturing management and technology approaches that can be used to achieve a better product and process balance in the S AND T phase, which precedes the formal acquisition process, and that result in both unit production and total life cycle cost reduction. It chose S AND T "exit criteria" and metrics as the means to demonstrate process as well as performance capability during the S AND T phase and to reduce downstream acquisition risks. The Task Force also examined a key enabler of IPPD and manufacturing enterprise control-advanced modeling and simulation technology. The work in this area by this Task Force relates to the work of another DSB Summer Study that specifically addressed simulation, the Readiness, Simulation, and Prototyping Task Force. The expanded use of best commercial products, practices, and manufacturing capabilities was also considered as an additional way to meet the Department of Defense (DOD) future needs for rapid transition to production and economic low-volume manufacturing. As a result of its deliberations, the Task Force developed specific recommendations for experiments to be conducted within S AND T Advanced Technology Demonstrations (ATDs) to validate the benefits of the new recommended approaches to S AND T contained in this report.
Final Report of the Defense Science Board Task Force on Engineering in the Manufacturing Process
Author: United States. Defense Science Board. Task Force on Engineering in the Manufacturing Process
Publisher:
ISBN:
Category : Manufacturing processes
Languages : en
Pages :
Book Description
This report presents the recommendations of the Defense Science Board (DSB) Summer Study Task Force on Engineering in the Manufacturing Process. The terms of reference (TOR) for this Task Force represent a logical continuation of DSB manufacturing studies performed in prior years, particularly in the areas of integrated product and process development (IPPD)2and dual-use-manufacturing. In this study, however, the primary focus is on Science and Technology (S&T) and the application of IPPD and dual-use concepts even earlier than previous studies have recommended. During its study, the Task Force addressed engineering and manufacturing management and technology approaches that can be used to achieve a better product and process balance in the S&T phase, which precedes the formal acquisition process, and that result in both unit production and total life cycle cost reduction. It chose S&T "exit criteria" and metrics as the means to demonstrate process as well as performance capability during the S&T phase and to reduce downstream acquisition risks. The Task Force also examined a key enabler of IPPD and manufacturing enterprise control-advanced modeling and simulation technology. The work in this area by this Task Force relates to the work of another DSB Summer Study that specifically addressed simulation, the Readiness, Simulation, and Prototyping Task Force. The expanded use of best commercial products, practices, and manufacturing capabilities was also considered as an additional way to meet the Department of Defense (DOD) future needs for rapid transition to production and economic low-volume manufacturing. As a result of its deliberations, the Task Force developed specific recommendations for experiments to be conducted within S&T Advanced Technology Demonstrations (ATDs) to validate the benefits of the new recommended approaches to S&T contained in this report.
Publisher:
ISBN:
Category : Manufacturing processes
Languages : en
Pages :
Book Description
This report presents the recommendations of the Defense Science Board (DSB) Summer Study Task Force on Engineering in the Manufacturing Process. The terms of reference (TOR) for this Task Force represent a logical continuation of DSB manufacturing studies performed in prior years, particularly in the areas of integrated product and process development (IPPD)2and dual-use-manufacturing. In this study, however, the primary focus is on Science and Technology (S&T) and the application of IPPD and dual-use concepts even earlier than previous studies have recommended. During its study, the Task Force addressed engineering and manufacturing management and technology approaches that can be used to achieve a better product and process balance in the S&T phase, which precedes the formal acquisition process, and that result in both unit production and total life cycle cost reduction. It chose S&T "exit criteria" and metrics as the means to demonstrate process as well as performance capability during the S&T phase and to reduce downstream acquisition risks. The Task Force also examined a key enabler of IPPD and manufacturing enterprise control-advanced modeling and simulation technology. The work in this area by this Task Force relates to the work of another DSB Summer Study that specifically addressed simulation, the Readiness, Simulation, and Prototyping Task Force. The expanded use of best commercial products, practices, and manufacturing capabilities was also considered as an additional way to meet the Department of Defense (DOD) future needs for rapid transition to production and economic low-volume manufacturing. As a result of its deliberations, the Task Force developed specific recommendations for experiments to be conducted within S&T Advanced Technology Demonstrations (ATDs) to validate the benefits of the new recommended approaches to S&T contained in this report.
Engineering in the Manufacturing Process
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 169
Book Description
This report presents the recommendations of the Defense Science Board (DSB) Summer Study Task Force on Engineering in the Manufacturing Process. The terms of reference (TOR) for this Task Force represent a logical continuation of DSB manufacturing studies performed in prior years, particularly in the areas of integrated product and process development (IPPD) and dual-use-manufacturing. In this study, however, the primary focus is on Science and Technology (S and T) and the application of IPPD and dual-use concepts even earlier than previous studies have recommended. During its study, the Task Force addressed engineering and manufacturing management and technology approaches that can be used to achieve a better product and process balance in the S and T phase, which precedes the formal acquisition process, and that result in both unit production and total life cycle cost reduction. It chose S and T 'exit criteria' and metrics as the means to demonstrate process as well as performance capability during the S and T phase and to reduce downstream acquisition risks. The Task Force also examined a key enabler of IPPD and manufacturing enterprise control- advanced modeling and simulation technology. The work in this area by this Task Force relates to the work of another DSB Summer Study that specifically addressed simulation, the Readiness, Simulation, and Prototying Task Force. The expanded use of best commercial products, practices, and manufacturing capabilities was also considered as an additional way to meet the Department of Defense (DoD) future needs for rapid transition to production and economic low- volume manufacturing.
Publisher:
ISBN:
Category :
Languages : en
Pages : 169
Book Description
This report presents the recommendations of the Defense Science Board (DSB) Summer Study Task Force on Engineering in the Manufacturing Process. The terms of reference (TOR) for this Task Force represent a logical continuation of DSB manufacturing studies performed in prior years, particularly in the areas of integrated product and process development (IPPD) and dual-use-manufacturing. In this study, however, the primary focus is on Science and Technology (S and T) and the application of IPPD and dual-use concepts even earlier than previous studies have recommended. During its study, the Task Force addressed engineering and manufacturing management and technology approaches that can be used to achieve a better product and process balance in the S and T phase, which precedes the formal acquisition process, and that result in both unit production and total life cycle cost reduction. It chose S and T 'exit criteria' and metrics as the means to demonstrate process as well as performance capability during the S and T phase and to reduce downstream acquisition risks. The Task Force also examined a key enabler of IPPD and manufacturing enterprise control- advanced modeling and simulation technology. The work in this area by this Task Force relates to the work of another DSB Summer Study that specifically addressed simulation, the Readiness, Simulation, and Prototying Task Force. The expanded use of best commercial products, practices, and manufacturing capabilities was also considered as an additional way to meet the Department of Defense (DoD) future needs for rapid transition to production and economic low- volume manufacturing.
Report of the Defense Science Board Summer Study Task Force on Defense Manufacturing Enterprise Strategy
Author:
Publisher: DIANE Publishing
ISBN: 1428982981
Category : Industrial mobilization
Languages : en
Pages : 137
Book Description
Over the past decade, dozens of studies, reports, directives, and commissions have recommended specific changes in the approach the Department of Defense (DoD) uses to acquire products (primarily major weapon systems). This Defense Science Board (DSB) Summer Study Task Force reviewed these prior studies and concluded that, by and large, the recommendations have ben implemented. Rather than adding to the list of 'what to do' recommendations, this Task Force concentrated on recommending 'how-to-implement' change. This is a departure from the typical technical recommendations, but the Task Force believes this 'how to' focus is urgently needed at this juncture.
Publisher: DIANE Publishing
ISBN: 1428982981
Category : Industrial mobilization
Languages : en
Pages : 137
Book Description
Over the past decade, dozens of studies, reports, directives, and commissions have recommended specific changes in the approach the Department of Defense (DoD) uses to acquire products (primarily major weapon systems). This Defense Science Board (DSB) Summer Study Task Force reviewed these prior studies and concluded that, by and large, the recommendations have ben implemented. Rather than adding to the list of 'what to do' recommendations, this Task Force concentrated on recommending 'how-to-implement' change. This is a departure from the typical technical recommendations, but the Task Force believes this 'how to' focus is urgently needed at this juncture.
Defense Science Board Task Force Report :.
Author: United States. Defense Science Board. Task Force on Engineering in the Manufacturing Process
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Report of the Defense Science Board Task Force on C-17 review
Author:
Publisher: DIANE Publishing
ISBN: 1428992758
Category :
Languages : en
Pages : 72
Book Description
Publisher: DIANE Publishing
ISBN: 1428992758
Category :
Languages : en
Pages : 72
Book Description
Report of Defense Science Board Task Force on Defense Semiconductor Dependency
Author: United States. Defense Science Board. Task Force on Defense Semiconductor Dependency
Publisher:
ISBN:
Category : Semiconductor industry
Languages : en
Pages : 124
Book Description
Publisher:
ISBN:
Category : Semiconductor industry
Languages : en
Pages : 124
Book Description
Report of the Defense Science Board Task Force on Joint Advanced Strike Technology (JAST) Program
Author: United States. Defense Science Board. Task Force on Joint Advanced Strike Technology (JAST) Program
Publisher: DIANE Publishing
ISBN: 1428994939
Category : Air weapons
Languages : en
Pages : 137
Book Description
Publisher: DIANE Publishing
ISBN: 1428994939
Category : Air weapons
Languages : en
Pages : 137
Book Description