Author: John D. Wenzlick
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 26
Book Description
The deck to be replaced in this project was on the Nemo Bridge, built in 1960 by the U.S. Army Corps of Engineers over Pomme De Terre Lake. This 1698-ft-long steel bridge had wide flange girders with a 7-in.-thick composite reinforced concrete deck only 22 ft wide. A precast deck system, using 10-ft-long precast sections with the barrier attached, allowed overnight replacement of a least 30 ft of bridge deck per night.
Deck Replacement with Precast Reinforced Concrete Segments
Author: John D. Wenzlick
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 26
Book Description
The deck to be replaced in this project was on the Nemo Bridge, built in 1960 by the U.S. Army Corps of Engineers over Pomme De Terre Lake. This 1698-ft-long steel bridge had wide flange girders with a 7-in.-thick composite reinforced concrete deck only 22 ft wide. A precast deck system, using 10-ft-long precast sections with the barrier attached, allowed overnight replacement of a least 30 ft of bridge deck per night.
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 26
Book Description
The deck to be replaced in this project was on the Nemo Bridge, built in 1960 by the U.S. Army Corps of Engineers over Pomme De Terre Lake. This 1698-ft-long steel bridge had wide flange girders with a 7-in.-thick composite reinforced concrete deck only 22 ft wide. A precast deck system, using 10-ft-long precast sections with the barrier attached, allowed overnight replacement of a least 30 ft of bridge deck per night.
Recommendations for the Connection Between Full-depth Precast Bridge Deck Panel Systems and Precast I-beams
Author:
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 75
Book Description
Precast bridge deck panels can be used in place of a cast-in-place concrete deck to reduce bridge closure times for deck replacements or new bridge construction. The panels are prefabricated at a precasting plant providing optimal casting and curing conditions, which should result in highly durable decks. Precast panels can be either full-depth or partial-depth. Partial-depth panels act as a stay-in-place form for a cast-in-place concrete topping. This study investigated only the behavior of full-depth precast panels. The research described in this report had two primary objectives. The first was to develop a performance specification for the grout that fills the haunch between the top of the beam and the bottom of the deck panel, as well as the horizontal shear connector pockets and the panel-to-panel joints. Tests were performed using standard or modified ASTM tests to determine basic material properties on eight types of grout. The grouts were also used in tests that approximated the conditions in a deck panel system. Based on these tests, requirements for shrinkage, compressive strength, and flow were established for the grouts. It was more difficult to establish a test method and an acceptable performance level for adhesion, an important property for the strength and durability of the deck panel system. The second objective was to quantify the horizontal shear strength of the connection between the deck panel and the beam prestressed concrete beams. This portion of the research also investigated innovative methods of creating the connection. Push-off tests were conducted using several types of grout and a variety of connections. These tests were used to develop equations for the horizontal shear strength of the details. Two promising alternate connections, the hidden pocket detail and the shear stud detail, were tested for constructibility and strength. The final outcome of this study a set of recommendations for the design, detailing, and construction of the connection between full-depth precast deck panels and prestressed concrete I-beams. If designed and constructed properly, the deck panel system is an excellent option when rapid bridge deck construction or replacement is required.
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 75
Book Description
Precast bridge deck panels can be used in place of a cast-in-place concrete deck to reduce bridge closure times for deck replacements or new bridge construction. The panels are prefabricated at a precasting plant providing optimal casting and curing conditions, which should result in highly durable decks. Precast panels can be either full-depth or partial-depth. Partial-depth panels act as a stay-in-place form for a cast-in-place concrete topping. This study investigated only the behavior of full-depth precast panels. The research described in this report had two primary objectives. The first was to develop a performance specification for the grout that fills the haunch between the top of the beam and the bottom of the deck panel, as well as the horizontal shear connector pockets and the panel-to-panel joints. Tests were performed using standard or modified ASTM tests to determine basic material properties on eight types of grout. The grouts were also used in tests that approximated the conditions in a deck panel system. Based on these tests, requirements for shrinkage, compressive strength, and flow were established for the grouts. It was more difficult to establish a test method and an acceptable performance level for adhesion, an important property for the strength and durability of the deck panel system. The second objective was to quantify the horizontal shear strength of the connection between the deck panel and the beam prestressed concrete beams. This portion of the research also investigated innovative methods of creating the connection. Push-off tests were conducted using several types of grout and a variety of connections. These tests were used to develop equations for the horizontal shear strength of the details. Two promising alternate connections, the hidden pocket detail and the shear stud detail, were tested for constructibility and strength. The final outcome of this study a set of recommendations for the design, detailing, and construction of the connection between full-depth precast deck panels and prestressed concrete I-beams. If designed and constructed properly, the deck panel system is an excellent option when rapid bridge deck construction or replacement is required.
Applications of Precast Concrete in Repair and Replacement of Civil Works Structures
Author: James E. McDonald
Publisher:
ISBN:
Category : Concrete construction
Languages : en
Pages : 302
Book Description
Publisher:
ISBN:
Category : Concrete construction
Languages : en
Pages : 302
Book Description
Repair and Rehabilitation of Reinforced Concrete Structures
Author: Walter F. Silva-Araya
Publisher: ASCE Publications
ISBN: 0784470294
Category : Technology & Engineering
Languages : en
Pages : 267
Book Description
Proceedings of an international seminar, workshop, and exhibition, held in Maracaibo, Venezuela, April 28-May 1, 1997. Sponsored by National Science Foundation; Science and Technology Program (CYTED). Organized by NACE International Latin American Region Venezuelan Section; Venezuelan Corrosion Association (ASVENCOR); the Center for Hemispherical Cooperation (CoHemis), University of Puerto Rico; Center for Corrosion Studies, Universidad del Zulia, Maracaibo, Venezuela. This collection contains 17 papers that present international knowledge about reinforced concrete structures. Papers also describe future directions and propose joint research projects for repair and rehabilitation of reinforced concrete structures. Topics include: corrosion, service life, new materials, concrete block deterioration, vibration measurements, stainless steel rebar behaviors, and diagnosis and repair procedures resulting from overloads on a concrete parking structure. Summaries of workshop discussions are presented in Spanish and English.
Publisher: ASCE Publications
ISBN: 0784470294
Category : Technology & Engineering
Languages : en
Pages : 267
Book Description
Proceedings of an international seminar, workshop, and exhibition, held in Maracaibo, Venezuela, April 28-May 1, 1997. Sponsored by National Science Foundation; Science and Technology Program (CYTED). Organized by NACE International Latin American Region Venezuelan Section; Venezuelan Corrosion Association (ASVENCOR); the Center for Hemispherical Cooperation (CoHemis), University of Puerto Rico; Center for Corrosion Studies, Universidad del Zulia, Maracaibo, Venezuela. This collection contains 17 papers that present international knowledge about reinforced concrete structures. Papers also describe future directions and propose joint research projects for repair and rehabilitation of reinforced concrete structures. Topics include: corrosion, service life, new materials, concrete block deterioration, vibration measurements, stainless steel rebar behaviors, and diagnosis and repair procedures resulting from overloads on a concrete parking structure. Summaries of workshop discussions are presented in Spanish and English.
Innovative Bridge Designs for Rapid Renewal
Author: HNTB Corporation, Genesis Structures Inc, Structural Engineering Associates, and Iowa State University
Publisher: Transportation Research Board
ISBN: 0309274109
Category :
Languages : en
Pages : 976
Book Description
This report from the second Strategic Highway Research Program (SHRP 2), which is administered by the Transportation Research Board of the National Academies, documents the development of standardized approaches to designing and constructing complete bridge systems for rapid renewals.
Publisher: Transportation Research Board
ISBN: 0309274109
Category :
Languages : en
Pages : 976
Book Description
This report from the second Strategic Highway Research Program (SHRP 2), which is administered by the Transportation Research Board of the National Academies, documents the development of standardized approaches to designing and constructing complete bridge systems for rapid renewals.
Use of Precast Concrete Deck Panels
NU-DECK Precast Deck Panels & Innovative Bridge Research and Construction
Author: Maher K. Tadros
Publisher:
ISBN:
Category : Concrete bridges
Languages : en
Pages : 148
Book Description
Publisher:
ISBN:
Category : Concrete bridges
Languages : en
Pages : 148
Book Description
Rapid Replacement of Bridge Decks
Author: Maher K. Tadros
Publisher: Transportation Research Board
ISBN: 9780309062602
Category : Technology & Engineering
Languages : en
Pages : 64
Book Description
Publisher: Transportation Research Board
ISBN: 9780309062602
Category : Technology & Engineering
Languages : en
Pages : 64
Book Description
Construction of Prestressed Concrete Structures
Author: Ben C. Gerwick, Jr.
Publisher: John Wiley & Sons
ISBN: 9780471181132
Category : Technology & Engineering
Languages : en
Pages : 624
Book Description
Die zweite Auflage dieses Klassikers - jetzt als Paperback - bietet Profis auf diesem Gebiet eine aktuelle und kompetente Präsentation der Technologie der Vorbelastung von Stahlbeton. Grundlegende Techniken, Materialien und Systeme werden behandelt und vielfältige Anwendungen - Gebäude, Brücken, Bohrplattformen, Straßen, Rollbahnen, Rohrleitungen - erläutert.
Publisher: John Wiley & Sons
ISBN: 9780471181132
Category : Technology & Engineering
Languages : en
Pages : 624
Book Description
Die zweite Auflage dieses Klassikers - jetzt als Paperback - bietet Profis auf diesem Gebiet eine aktuelle und kompetente Präsentation der Technologie der Vorbelastung von Stahlbeton. Grundlegende Techniken, Materialien und Systeme werden behandelt und vielfältige Anwendungen - Gebäude, Brücken, Bohrplattformen, Straßen, Rollbahnen, Rohrleitungen - erläutert.
Experimental Behavior of Full Depth Precast Concrete Deck Panels for Bridge Reconstruction
Author: Alfred Antonious Yousif
Publisher:
ISBN:
Category :
Languages : en
Pages : 368
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 368
Book Description