Author: Siu-Lai Chan
Publisher: Elsevier
ISBN: 0080537715
Category : Technology & Engineering
Languages : en
Pages : 355
Book Description
This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.
Non-Linear Static and Cyclic Analysis of Steel Frames with Semi-Rigid Connections
Author: Siu-Lai Chan
Publisher: Elsevier
ISBN: 0080537715
Category : Technology & Engineering
Languages : en
Pages : 355
Book Description
This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.
Publisher: Elsevier
ISBN: 0080537715
Category : Technology & Engineering
Languages : en
Pages : 355
Book Description
This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.
Cyclic Analysis
Author: J. M. Hurst
Publisher:
ISBN: 9780934380560
Category : Business & Economics
Languages : en
Pages : 48
Book Description
Legendary pioneer in cyclical price analysis explains the concepts derived from his extensive computer research into market price movements. Elaborates on concepts in his groundbreaking work, The Profit Magic of Stock Transaction Timing, and gives an overview and description of the material in his comprehensive cycles training course which sells for $495. Buyers of this book receive credit for price paid towards purchase of Hurst's full course.
Publisher:
ISBN: 9780934380560
Category : Business & Economics
Languages : en
Pages : 48
Book Description
Legendary pioneer in cyclical price analysis explains the concepts derived from his extensive computer research into market price movements. Elaborates on concepts in his groundbreaking work, The Profit Magic of Stock Transaction Timing, and gives an overview and description of the material in his comprehensive cycles training course which sells for $495. Buyers of this book receive credit for price paid towards purchase of Hurst's full course.
Mastering Hurst Cycle Analysis
Author: Christopher Grafton
Publisher: Harriman House Limited
ISBN: 0857191985
Category : Business & Economics
Languages : en
Pages : 384
Book Description
One of the best classical methods of technical analysis brought up to date This book offers a modern treatment of Hurst's original system of market cycle analysis. It will teach you how to get to the point where you can isolate cycles in any freely-traded financial instrument and make an assessment of their likely future course. Although Hurst's methodology can seem outwardly complex, the logic underpinning it is straightforward. With practice the skill needed to conduct a full cycle analysis quickly and effectively will become second nature. The rewards for becoming adept are high conviction trades, tight risk management and mastery of a largely non-correlated system of analysis. In this extensive step-by-step guide you will find a full description of the principal tools and techniques taught by Hurst as well as over 120 colour charts, together with tables and diagrams. The Updata and TradeStation code for all of the indicators shown is also included.
Publisher: Harriman House Limited
ISBN: 0857191985
Category : Business & Economics
Languages : en
Pages : 384
Book Description
One of the best classical methods of technical analysis brought up to date This book offers a modern treatment of Hurst's original system of market cycle analysis. It will teach you how to get to the point where you can isolate cycles in any freely-traded financial instrument and make an assessment of their likely future course. Although Hurst's methodology can seem outwardly complex, the logic underpinning it is straightforward. With practice the skill needed to conduct a full cycle analysis quickly and effectively will become second nature. The rewards for becoming adept are high conviction trades, tight risk management and mastery of a largely non-correlated system of analysis. In this extensive step-by-step guide you will find a full description of the principal tools and techniques taught by Hurst as well as over 120 colour charts, together with tables and diagrams. The Updata and TradeStation code for all of the indicators shown is also included.
Life Cycle Inventory Analysis
Author: Andreas Ciroth
Publisher: Springer
ISBN: 9783030622725
Category : Science
Languages : en
Pages : 0
Book Description
Life Cycle Inventory (LCI) Analysis is the second phase in the Life Cycle Assessment (LCA) framework. Since the first attempts to formalize life cycle assessment in the early 1970, life cycle inventory analysis has been a central part. Chapter 1 “Introduction to Life Cycle Inventory Analysis“ discusses the history of inventory analysis from the 1970s through SETAC and the ISO standard. In Chapter 2 “Principles of Life Cycle Inventory Modeling”, the general principles of setting up an LCI model and LCI analysis are described by introducing the core LCI model and extensions that allow addressing reality better. Chapter 3 “Development of Unit Process Datasets” shows that developing unit processes of high quality and transparency is not a trivial task, but is crucial for high-quality LCA studies. Chapter 4 “Multi-functionality in Life Cycle Inventory Analysis: Approaches and Solutions” describes how multi-functional processes can be identified. In Chapter 5 “Data Quality in Life Cycle Inventories”, the quality of data gathered and used in LCI analysis is discussed. State-of-the-art indicators to assess data quality in LCA are described and the fitness for purpose concept is introduced. Chapter 6 “Life Cycle Inventory Data and Databases“ follows up on the topic of LCI data and provides a state-of-the-art description of LCI databases. It describes differences between foreground and background data, recommendations for starting a database, data exchange and quality assurance concepts for databases, as well as the scientific basis of LCI databases. Chapter 7 “Algorithms of Life Cycle Inventory Analysis“ provides the mathematical models underpinning the LCI. Since Heijungs and Suh (2002), this is the first time that this aspect of LCA has been fundamentally presented. In Chapter 8 “Inventory Indicators in Life Cycle Assessment”, the use of LCI data to create aggregated environmental and resource indicators is described. Such indicators include the cumulative energy demand and various water use indicators. Chapter 9 “The Link Between Life Cycle Inventory Analysis and Life Cycle Impact Assessment” uses four examples to discuss the link between LCI analysis and LCIA. A clear and relevant link between these phases is crucial.
Publisher: Springer
ISBN: 9783030622725
Category : Science
Languages : en
Pages : 0
Book Description
Life Cycle Inventory (LCI) Analysis is the second phase in the Life Cycle Assessment (LCA) framework. Since the first attempts to formalize life cycle assessment in the early 1970, life cycle inventory analysis has been a central part. Chapter 1 “Introduction to Life Cycle Inventory Analysis“ discusses the history of inventory analysis from the 1970s through SETAC and the ISO standard. In Chapter 2 “Principles of Life Cycle Inventory Modeling”, the general principles of setting up an LCI model and LCI analysis are described by introducing the core LCI model and extensions that allow addressing reality better. Chapter 3 “Development of Unit Process Datasets” shows that developing unit processes of high quality and transparency is not a trivial task, but is crucial for high-quality LCA studies. Chapter 4 “Multi-functionality in Life Cycle Inventory Analysis: Approaches and Solutions” describes how multi-functional processes can be identified. In Chapter 5 “Data Quality in Life Cycle Inventories”, the quality of data gathered and used in LCI analysis is discussed. State-of-the-art indicators to assess data quality in LCA are described and the fitness for purpose concept is introduced. Chapter 6 “Life Cycle Inventory Data and Databases“ follows up on the topic of LCI data and provides a state-of-the-art description of LCI databases. It describes differences between foreground and background data, recommendations for starting a database, data exchange and quality assurance concepts for databases, as well as the scientific basis of LCI databases. Chapter 7 “Algorithms of Life Cycle Inventory Analysis“ provides the mathematical models underpinning the LCI. Since Heijungs and Suh (2002), this is the first time that this aspect of LCA has been fundamentally presented. In Chapter 8 “Inventory Indicators in Life Cycle Assessment”, the use of LCI data to create aggregated environmental and resource indicators is described. Such indicators include the cumulative energy demand and various water use indicators. Chapter 9 “The Link Between Life Cycle Inventory Analysis and Life Cycle Impact Assessment” uses four examples to discuss the link between LCI analysis and LCIA. A clear and relevant link between these phases is crucial.
Cyclic Plasticity of Metals
Author: Hamid Jahed
Publisher: Elsevier
ISBN: 0128192941
Category : Technology & Engineering
Languages : en
Pages : 470
Book Description
Cyclic Plasticity of Metals: Modeling Fundamentals and Applications provides an exhaustive overview of the fundamentals and applications of various cyclic plasticity models including forming and spring back, notch analysis, fatigue life prediction, and more. Covering metals with an array of different structures, such as hexagonal close packed (HCP), face centered cubic (FCC), and body centered cubic (BCC), the book starts with an introduction to experimental macroscopic and microscopic observations of cyclic plasticity and then segues into a discussion of the fundamentals of the different cyclic plasticity models, covering topics such as kinematics, stress and strain tensors, elasticity, plastic flow rule, and an array of other concepts. A review of the available models follows, and the book concludes with chapters covering finite element implementation and industrial applications of the various models. - Reviews constitutive cyclic plasticity models for various metals and alloys with different cell structures (cubic, hexagonal, and more), allowing for more accurate evaluation of a component's performance under loading - Provides real-world industrial context by demonstrating applications of cyclic plasticity models in the analysis of engineering components - Overview of latest models allows researchers to extend available models or develop new ones for analysis of an array of metals under more complex loading conditions
Publisher: Elsevier
ISBN: 0128192941
Category : Technology & Engineering
Languages : en
Pages : 470
Book Description
Cyclic Plasticity of Metals: Modeling Fundamentals and Applications provides an exhaustive overview of the fundamentals and applications of various cyclic plasticity models including forming and spring back, notch analysis, fatigue life prediction, and more. Covering metals with an array of different structures, such as hexagonal close packed (HCP), face centered cubic (FCC), and body centered cubic (BCC), the book starts with an introduction to experimental macroscopic and microscopic observations of cyclic plasticity and then segues into a discussion of the fundamentals of the different cyclic plasticity models, covering topics such as kinematics, stress and strain tensors, elasticity, plastic flow rule, and an array of other concepts. A review of the available models follows, and the book concludes with chapters covering finite element implementation and industrial applications of the various models. - Reviews constitutive cyclic plasticity models for various metals and alloys with different cell structures (cubic, hexagonal, and more), allowing for more accurate evaluation of a component's performance under loading - Provides real-world industrial context by demonstrating applications of cyclic plasticity models in the analysis of engineering components - Overview of latest models allows researchers to extend available models or develop new ones for analysis of an array of metals under more complex loading conditions
Cyclic Voltammetry
Author: D. K. Gosser
Publisher: Wiley-VCH
ISBN: 9780471188032
Category : Science
Languages : en
Pages : 156
Book Description
Cyclic Voltammetry is the only book solely devoted to its subject and containing a data analysis project written by the author. Beginning with the fundamentals of cyclic voltammetry from both an experimental and theoretical point of view, the author focuses on the applications in data interpretation with emphasis on chemical reactions and electrode reduction potentials. The PC compatible computer program that accompanies the book provides the experimentalists with a simulation-based approach for the analysis of cyclic voltammograms. A survey format is utilized to discuss the use of CV for the study of reaction mechanisms in diverse branches of chemistry. The author then presents the method of simulation by explicit finite differences, the most commonly employed numerical method of CV analysis. The CVSIM program, written by the author and used in several countries, simulates cyclic voltammetric experiments. It is explained along with DSTEP, a general program for the simulation of double potential step experiments. Next the author describes CVFIT to find the least squares best fit between experimental and simulated cyclic voltammograms. Chemists of all types as well as academic and industrial researchers and graduate level students are certain to find cyclic voltammetry a useful, valuable and long overdue addition to the field.
Publisher: Wiley-VCH
ISBN: 9780471188032
Category : Science
Languages : en
Pages : 156
Book Description
Cyclic Voltammetry is the only book solely devoted to its subject and containing a data analysis project written by the author. Beginning with the fundamentals of cyclic voltammetry from both an experimental and theoretical point of view, the author focuses on the applications in data interpretation with emphasis on chemical reactions and electrode reduction potentials. The PC compatible computer program that accompanies the book provides the experimentalists with a simulation-based approach for the analysis of cyclic voltammograms. A survey format is utilized to discuss the use of CV for the study of reaction mechanisms in diverse branches of chemistry. The author then presents the method of simulation by explicit finite differences, the most commonly employed numerical method of CV analysis. The CVSIM program, written by the author and used in several countries, simulates cyclic voltammetric experiments. It is explained along with DSTEP, a general program for the simulation of double potential step experiments. Next the author describes CVFIT to find the least squares best fit between experimental and simulated cyclic voltammograms. Chemists of all types as well as academic and industrial researchers and graduate level students are certain to find cyclic voltammetry a useful, valuable and long overdue addition to the field.
Development of a Simplified Procedure for Cyclic Structural Analysis
Author: Albert Kaufman
Publisher:
ISBN:
Category : Structural analysis (Engineering)
Languages : en
Pages : 24
Book Description
Publisher:
ISBN:
Category : Structural analysis (Engineering)
Languages : en
Pages : 24
Book Description
Analysis and Software of Cylindrical Members
Author: W.F. Chen
Publisher: CRC Press
ISBN: 1000142280
Category : Technology & Engineering
Languages : en
Pages : 324
Book Description
This book provides an in-depth look at the behavior, design, and construction of offshore structures. It describes the behavior of cylindrical members and suggests appropriate software, written by the contributors, to determine everything from loading up to the ultimate load, including post-buckling and cyclic inelasticity.
Publisher: CRC Press
ISBN: 1000142280
Category : Technology & Engineering
Languages : en
Pages : 324
Book Description
This book provides an in-depth look at the behavior, design, and construction of offshore structures. It describes the behavior of cylindrical members and suggests appropriate software, written by the contributors, to determine everything from loading up to the ultimate load, including post-buckling and cyclic inelasticity.
Literature Search
Author: National Library of Medicine (U.S.)
Publisher:
ISBN:
Category : Medicine
Languages : en
Pages : 1848
Book Description
Publisher:
ISBN:
Category : Medicine
Languages : en
Pages : 1848
Book Description
Phonology in the 1980s
Author: Didier L. Goyvaerts
Publisher: John Benjamins Publishing
ISBN: 9027270856
Category : Language Arts & Disciplines
Languages : en
Pages : 657
Book Description
This volume brings together a number of ground-breaking papers in the theory of phonology.
Publisher: John Benjamins Publishing
ISBN: 9027270856
Category : Language Arts & Disciplines
Languages : en
Pages : 657
Book Description
This volume brings together a number of ground-breaking papers in the theory of phonology.