Author: Charles J. McMahonPublisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 448
Book Description
Microplasticity
Author: Charles J. McMahonPublisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 448
Book Description
Corrosion of Titanium
Author: J. D. JacksonPublisher:
ISBN:
Category : Titanium
Languages : en
Pages : 54
Book Description
Titanium and Titanium Alloys
Author: Christoph LeyensPublisher: John Wiley & Sons
ISBN: 3527605207
Category : Technology & Engineering
Languages : de
Pages : 532
Book Description
This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Proceedings of the 13th World Conference on Titanium
Author: Vasisht VenkateshPublisher: John Wiley & Sons
ISBN: 1119296110
Category : Technology & Engineering
Languages : en
Pages : 4024
Book Description
This book contains the Proceedings of the 13th World Conference on Titanium.
Titanium Alloys
Author: Maciej MotykaPublisher: BoD – Books on Demand
ISBN: 183962552X
Category : Technology & Engineering
Languages : en
Pages : 156
Book Description
Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Advances in Fracture Research
Author: B.L. KarihalooPublisher: Elsevier
ISBN: 008098374X
Category : Technology & Engineering
Languages : en
Pages : 661
Book Description
Fracture is a major cause of failure in metallic and non-metallic materials and structures. An understanding of the micro- and macro- mechanisms of fracture enables materials scientists to develop materials with high fracture resistance, which in turn helps engineers and designers to ensure the soundness and integrity of structures made from these materials. The International Congress on Fracture is held every four years and is an occasion to take stock of the major achievements in the broad field of fracture, to honour those who have made lasting contributions to this field, and to reflect on the future directions. ICF9 is published in six volumes covering the areas of:-- Failure Analysis, Remaining Life Assessment, Life Extension and Repair- Failure of Multiphase and Non-Metallic Materials- Fatigue of Metallic and Non-Metallic Materials and Structures- Theoretical and Computational Fracture Mechanics and New Directions- Testing and Characterization Methods, and Interfacial Fracture Mechanics- High Strain Rate Fracture and Impact Mechanics.
Fundamentals of Creep in Metals and Alloys
Author: Michael E. KassnerPublisher: Elsevier
ISBN: 0080532144
Category : Technology & Engineering
Languages : en
Pages : 289
Book Description
* Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Titanium
Author: Matthew J. DonachiePublisher: ASM International
ISBN: 161503062X
Category : Technology & Engineering
Languages : en
Pages : 381
Book Description
Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Titanium Alloys
Author: Jan SieniawskiPublisher: BoD – Books on Demand
ISBN: 9535111108
Category : Technology & Engineering
Languages : en
Pages : 160
Book Description
The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
From Microstructure Investigations to Multiscale Modeling
Author: Delphine BrancheriePublisher: John Wiley & Sons
ISBN: 1786302594
Category : Science
Languages : en
Pages : 304
Book Description
Mechanical behaviors of materials are highly influenced by their architectures and/or microstructures. Hence, progress in material science involves understanding and modeling the link between the microstructure and the material behavior at different scales. This book gathers contributions from eminent researchers in the field of computational and experimental material modeling. It presents advanced experimental techniques to acquire the microstructure features together with dedicated numerical and analytical tools to take into account the randomness of the micro-structure.