Author: R. J. JackoPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Corrosion Evaluating of Thermally Treated Alloy 600 Tubing in Primary and Faculted Secondary Water Environments
Author: R. J. JackoCorrosion Evaluation of Thermally Treated Alloy 600 Tubing in Primary and Faulted Secondary Water Environments
Author: R. J. JackoCorrosion Evaluation of Thermally Treated Alloy 600 Tubing in Primary and Faulted Secondary Water Environments
Author: A Caustic Stress-Corrosion Cracking Evaluation of Thermally Treated Inconel Alloy 600 Steam Generator Tubing
Author: GP. AireyPublisher:
ISBN:
Category : Alloys
Languages : en
Pages : 20
Book Description
The stress-corrosion cracking (SCC) resistance of commercially fabricated mill-annealed and thermally treated Inconel Alloy 600 steam generator tubing was evaluated over a range of sodium hydroxide concentrations (10 to 50 percent), test temperatures [316 to 343 °C (600 to 650 °F)] and applied stresses (50 to 150 percent yield stress). The grain boundary microstructure was compared with that previously observed in laboratory-treated material. The SCC resistance of thermally treated tubing was superior to that of the mill-annealed product for all test conditions. It was confirmed that the improvement in caustic SCC resistance correlated with the presence of a semicontinuous grain-boundary chromium carbide precipitate. Grain boundary segregation (phosphorus, boron) and chromium depletion do not adversely affect SCC performance. The presence of copper oxide reduced SCC resistance, whereas the presence of silica inhibited SCC. These observations were rationalized by reference to the anodic polarization curve.
Strain Rate and Temperature Effects on the Stress Corrosion Cracking of Inconel 600 Steam Generator Tubing in the Primary Water Conditions
Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
A single heat of Inconel Alloy 600 was examined in this work, using slow strain rate tests (SSRT) in simulated primary water at temperatures of 325°−345sup 0/-365°C. The best measure of stress corrosion cracking (SCC) was percent SCC present on the fracture surface. Strain rate did not seem to affect crack growth rate significantly, but there is some question about the accuracy of calculating these values in the absence of a direct indication of when a crack initiates. Demarcation was determined between domains of temperature/strain rate where SCC either did, or did not, occur. Slower extension rates were needed to produce SCC as the temperature was lowered. 10 figs.
Corrosion Engineering
Author: Branko N. PopovPublisher: Elsevier
ISBN: 0444627278
Category : Science
Languages : en
Pages : 813
Book Description
Corrosion Engineering: Principles and Solved Problems covers corrosion engineering through an extensive theoretical description of the principles of corrosion theory, passivity and corrosion prevention strategies and design of corrosion protection systems. The book is updated with results published in papers and reviews in the last twenty years. Solved corrosion case studies, corrosion analysis and solved corrosion problems in the book are presented to help the reader to understand the corrosion fundamental principles from thermodynamics and electrochemical kinetics, the mechanism that triggers the corrosion processes at the metal interface and how to control or inhibit the corrosion rates. The book covers the multidisciplinary nature of corrosion engineering through topics from electrochemistry, thermodynamics, mechanical, bioengineering and civil engineering. - Addresses the corrosion theory, passivity, material selections and designs - Covers extensively the corrosion engineering protection strategies - Contains over 500 solved problems, diagrams, case studies and end of chapter problems - Could be used as a text in advanced/graduate corrosion courses as well self-study reference for corrosion engineers
Corrosion Abstracts
Author: Publisher:
ISBN:
Category : Corrosion and anti-corrosives
Languages : en
Pages : 628
Book Description
Advanced Coatings for Corrosion Protection
Author: Wolfram FürbethPublisher: MDPI
ISBN: 3039439219
Category : Technology & Engineering
Languages : en
Pages : 222
Book Description
Corrosion is a significant issue in many industrial fields. Among other strategies, coatings are by far the most important technology for corrosion protection of metallic surfaces. The Special Issue “Advanced Coatings for Corrosion Protection” has been launched as a means to present recent developments in any type of advanced coating for corrosion protection. This book compiles 15 contributions on metallic, inorganic, polymeric and nanoparticle enhanced coatings that provide corrosion protection as well as other functionalities.
Arsenic Treatment Technologies for Soil, Waste, and Water
Author: Publisher: DIANE Publishing
ISBN: 1428900209
Category : Arsenic wastes
Languages : en
Pages : 132
Book Description
Analysis, Synthesis and Design of Chemical Processes
Author: Richard TurtonPublisher: Pearson Education
ISBN: 0132459183
Category : Technology & Engineering
Languages : en
Pages : 1562
Book Description
The Leading Integrated Chemical Process Design Guide: Now with New Problems, New Projects, and More More than ever, effective design is the focal point of sound chemical engineering. Analysis, Synthesis, and Design of Chemical Processes, Third Edition, presents design as a creative process that integrates both the big picture and the small details–and knows which to stress when, and why. Realistic from start to finish, this book moves readers beyond classroom exercises into open-ended, real-world process problem solving. The authors introduce integrated techniques for every facet of the discipline, from finance to operations, new plant design to existing process optimization. This fully updated Third Edition presents entirely new problems at the end of every chapter. It also adds extensive coverage of batch process design, including realistic examples of equipment sizing for batch sequencing; batch scheduling for multi-product plants; improving production via intermediate storage and parallel equipment; and new optimization techniques specifically for batch processes. Coverage includes Conceptualizing and analyzing chemical processes: flow diagrams, tracing, process conditions, and more Chemical process economics: analyzing capital and manufacturing costs, and predicting or assessing profitability Synthesizing and optimizing chemical processing: experience-based principles, BFD/PFD, simulations, and more Analyzing process performance via I/O models, performance curves, and other tools Process troubleshooting and “debottlenecking” Chemical engineering design and society: ethics, professionalism, health, safety, and new “green engineering” techniques Participating successfully in chemical engineering design teams Analysis, Synthesis, and Design of Chemical Processes, Third Edition, draws on nearly 35 years of innovative chemical engineering instruction at West Virginia University. It includes suggested curricula for both single-semester and year-long design courses; case studies and design projects with practical applications; and appendixes with current equipment cost data and preliminary design information for eleven chemical processes–including seven brand new to this edition.