Correcting the Linear Noise in Coherent Optical Orthogonal Frequency Division Multiplexing System Using Maximum Boundary Box Method PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Correcting the Linear Noise in Coherent Optical Orthogonal Frequency Division Multiplexing System Using Maximum Boundary Box Method PDF full book. Access full book title Correcting the Linear Noise in Coherent Optical Orthogonal Frequency Division Multiplexing System Using Maximum Boundary Box Method by Srujan Mamidala. Download full books in PDF and EPUB format.
Author: Srujan Mamidala Publisher: ISBN: 9780355529524 Category : Optical detectors Languages : en Pages : 40
Book Description
Abstract: The Coherent Optical Orthogonal Frequency Division Multiplexing System (CO-OFDM) is the combination of the OFDM system with the advantages of the coherent detection. The CO-OFDM is mainly used for high-speed data transmission systems like 100 GB/s and 1 Tb/s. In the CO-OFDM implementation scheme, there are two kinds of noise such as the non-linear noise and the linear noise. The linear noise can be defined as the change in phase of the signal in the carrier signal when the carrier is passing through the optical fiber.
Author: Srujan Mamidala Publisher: ISBN: 9780355529524 Category : Optical detectors Languages : en Pages : 40
Book Description
Abstract: The Coherent Optical Orthogonal Frequency Division Multiplexing System (CO-OFDM) is the combination of the OFDM system with the advantages of the coherent detection. The CO-OFDM is mainly used for high-speed data transmission systems like 100 GB/s and 1 Tb/s. In the CO-OFDM implementation scheme, there are two kinds of noise such as the non-linear noise and the linear noise. The linear noise can be defined as the change in phase of the signal in the carrier signal when the carrier is passing through the optical fiber.
Author: Daniel Jose Fernandes Barros Publisher: Stanford University ISBN: Category : Languages : en Pages : 160
Book Description
The drive towards higher spectral efficiency and maximum power efficiency in optical systems has generated renewed interest in the optimization of optical transceivers. In this work, we study the different optical applications: Wide Area Networks (WANs), Metropolitan Area Networks (MANs), Local Area Networks (LANs) and Personal Area Networks (PANs). In WANs or long-haul systems, orthogonal frequency-division multiplexing (OFDM) can compensate for linear distortions, such as group-velocity dispersion (GVD) and polarization-mode dispersion (PMD), provided the cyclic prefix is sufficiently long. Typically, GVD is dominant, as it requires a longer cyclic prefix. Assuming coherent detection, we show how to analytically compute the minimum number of subcarriers and cyclic prefix length required to achieve a specified power penalty, trading off power penalties from the cyclic prefix and from residual inter-symbol interference (ISI) and inter-carrier interference (ICI). We derive an analytical expression for the power penalty from residual ISI and ICI. We also show that when nonlinear effects are present in the fiber, single-carrier with digital equalization outperforms OFDM for various dispersion maps. We also study the impairments of electrical to optical conversion when using Mach-Zehnder (MZ) modulators. OFDM has a high peak-to-average ratio (PAR), which can result in low optical power efficiency when modulated through a Mach-Zehnder (MZ) modulator. In addition, the nonlinear characteristic of the MZ can cause significant distortion on the OFDM signal, leading to in-band intermodulation products between subcarriers. We show that a quadrature MZ with digital pre-distortion and hard clipping is able to overcome the previous impairments. We consider quantization noise and compute the minimum number of bits required in the digital-to-analog converter (D/A). Finally, we discuss a dual-drive MZ as a simpler alternative for the OFDM modulator, but our results show that it requires a higher oversampling ratio to achieve the same performance as the quadrature MZ. In MANs, we discuss the use OFDM for combating GVD effects in amplified direct-detection (DD) systems using single-mode fiber. We review known direct-detection OFDM techniques, including asymmetrically clipped optical OFDM (ACO-OFDM), DC-clipped OFDM (DC-OFDM) and single-sideband OFDM (SSB-OFDM), and derive a linearized channel model for each technique. We present an iterative procedure to achieve optimum power allocation for each OFDM technique, since there is no closed-form solution for amplified DD systems. For each technique, we minimize the optical power required to transmit at a given bit rate and normalized GVD by iteratively adjusting the bias and optimizing the power allocation among the subcarriers. We verify that SSB-OFDM has the best optical power efficiency among the different OFDM techniques. We compare these OFDM techniques to on-off keying (OOK) with maximum-likelihood sequence detection (MLSD) and show that SSB-OFDM can achieve the same optical power efficiency as OOK with MLSD, but at the cost of requiring twice the electrical bandwidth and also a complex quadrature modulator. We compare the computational complexity of the different techniques and show that SSB-OFDM requires fewer operations per bit than OOK with MLSD. In LANs, we compare the performance of several OFDM schemes to that of OOK in combating modal dispersion in multimode fiber links. We review known OFDM techniques using intensity modulation with direct detection (IM/DD), including DC-OFDM, ACO-OFDM and pulse-amplitude modulated discrete multitone (PAM-DMT). We describe an iterative procedure to achieve optimal power allocation for DC-OFDM, and compare analytically the performance of ACO-OFDM and PAM-DMT. We also consider unipolar M-ary pulse-amplitude modulation (M-PAM) with minimum mean-square error decision-feedback equalization (MMSE-DFE). For each technique, we quantify the optical power required to transmit at a given bit rate in a variety of multimode fibers. For a given symbol rate, we find that unipolar M-PAM with MMSE-DFE has a better power performance than all OFDM formats. Furthermore, we observe that the difference in performance between M-PAM and OFDM increases as the spectral efficiency increases. We also find that at a spectral efficiency of 1 bit/symbol, OOK performs better than ACO-OFDM using a symbol rate twice that of OOK. At higher spectral efficiencies, M-PAM performs only slightly better than ACO-OFDM using twice the symbol rate, but requires less electrical bandwidth and can employ analog-to-digital converters at a speed only 81% of that required for ACO-OFDM. In PANs, we evaluate the performance of the three IM/DD OFDM schemes in combating multipath distortion in indoor optical wireless links, comparing them to unipolar M-PAM with MMSE-DFE. For each modulation method, we quantify the received electrical SNR required at a given bit rate on a given channel, considering an ensemble of 170 indoor wireless channels. When using the same symbol rate for all modulation methods, M-PAM with MMSE-DFE has better performance than any OFDM format over a range of spectral efficiencies, with the advantage of M-PAM increasing at high spectral efficiency. ACO-OFDM and PAM-DMT have practically identical performance at any spectral efficiency. They are the best OFDM formats at low spectral efficiency, whereas DC-OFDM is best at high spectral efficiency. When ACO-OFDM or PAM-DMT are allowed to use twice the symbol rate of M-PAM, these OFDM formats have better performance than M-PAM. When channel state information is unavailable at the transmitter, however, M-PAM significantly outperforms all OFDM formats. When using the same symbol rate for all modulation methods, M-PAM requires approximately three times more computational complexity per processor than all OFDM formats and 63% faster analog-to-digital converters, assuming oversampling ratios of 1.23 and 2 for ACO-OFDM and M-PAM, respectively. When OFDM uses twice the symbol rate of M-PAM, OFDM requires 23% faster analog-to-digital converters than M-PAM but OFDM requires approximately 40% less computational complexity than M-PAM per processor.
Author: Daniel Jose Fernandes Barros Publisher: ISBN: Category : Languages : en Pages :
Book Description
The drive towards higher spectral efficiency and maximum power efficiency in optical systems has generated renewed interest in the optimization of optical transceivers. In this work, we study the different optical applications: Wide Area Networks (WANs), Metropolitan Area Networks (MANs), Local Area Networks (LANs) and Personal Area Networks (PANs). In WANs or long-haul systems, orthogonal frequency-division multiplexing (OFDM) can compensate for linear distortions, such as group-velocity dispersion (GVD) and polarization-mode dispersion (PMD), provided the cyclic prefix is sufficiently long. Typically, GVD is dominant, as it requires a longer cyclic prefix. Assuming coherent detection, we show how to analytically compute the minimum number of subcarriers and cyclic prefix length required to achieve a specified power penalty, trading off power penalties from the cyclic prefix and from residual inter-symbol interference (ISI) and inter-carrier interference (ICI). We derive an analytical expression for the power penalty from residual ISI and ICI. We also show that when nonlinear effects are present in the fiber, single-carrier with digital equalization outperforms OFDM for various dispersion maps. We also study the impairments of electrical to optical conversion when using Mach-Zehnder (MZ) modulators. OFDM has a high peak-to-average ratio (PAR), which can result in low optical power efficiency when modulated through a Mach-Zehnder (MZ) modulator. In addition, the nonlinear characteristic of the MZ can cause significant distortion on the OFDM signal, leading to in-band intermodulation products between subcarriers. We show that a quadrature MZ with digital pre-distortion and hard clipping is able to overcome the previous impairments. We consider quantization noise and compute the minimum number of bits required in the digital-to-analog converter (D/A). Finally, we discuss a dual-drive MZ as a simpler alternative for the OFDM modulator, but our results show that it requires a higher oversampling ratio to achieve the same performance as the quadrature MZ. In MANs, we discuss the use OFDM for combating GVD effects in amplified direct-detection (DD) systems using single-mode fiber. We review known direct-detection OFDM techniques, including asymmetrically clipped optical OFDM (ACO-OFDM), DC-clipped OFDM (DC-OFDM) and single-sideband OFDM (SSB-OFDM), and derive a linearized channel model for each technique. We present an iterative procedure to achieve optimum power allocation for each OFDM technique, since there is no closed-form solution for amplified DD systems. For each technique, we minimize the optical power required to transmit at a given bit rate and normalized GVD by iteratively adjusting the bias and optimizing the power allocation among the subcarriers. We verify that SSB-OFDM has the best optical power efficiency among the different OFDM techniques. We compare these OFDM techniques to on-off keying (OOK) with maximum-likelihood sequence detection (MLSD) and show that SSB-OFDM can achieve the same optical power efficiency as OOK with MLSD, but at the cost of requiring twice the electrical bandwidth and also a complex quadrature modulator. We compare the computational complexity of the different techniques and show that SSB-OFDM requires fewer operations per bit than OOK with MLSD. In LANs, we compare the performance of several OFDM schemes to that of OOK in combating modal dispersion in multimode fiber links. We review known OFDM techniques using intensity modulation with direct detection (IM/DD), including DC-OFDM, ACO-OFDM and pulse-amplitude modulated discrete multitone (PAM-DMT). We describe an iterative procedure to achieve optimal power allocation for DC-OFDM, and compare analytically the performance of ACO-OFDM and PAM-DMT. We also consider unipolar M-ary pulse-amplitude modulation (M-PAM) with minimum mean-square error decision-feedback equalization (MMSE-DFE). For each technique, we quantify the optical power required to transmit at a given bit rate in a variety of multimode fibers. For a given symbol rate, we find that unipolar M-PAM with MMSE-DFE has a better power performance than all OFDM formats. Furthermore, we observe that the difference in performance between M-PAM and OFDM increases as the spectral efficiency increases. We also find that at a spectral efficiency of 1 bit/symbol, OOK performs better than ACO-OFDM using a symbol rate twice that of OOK. At higher spectral efficiencies, M-PAM performs only slightly better than ACO-OFDM using twice the symbol rate, but requires less electrical bandwidth and can employ analog-to-digital converters at a speed only 81% of that required for ACO-OFDM. In PANs, we evaluate the performance of the three IM/DD OFDM schemes in combating multipath distortion in indoor optical wireless links, comparing them to unipolar M-PAM with MMSE-DFE. For each modulation method, we quantify the received electrical SNR required at a given bit rate on a given channel, considering an ensemble of 170 indoor wireless channels. When using the same symbol rate for all modulation methods, M-PAM with MMSE-DFE has better performance than any OFDM format over a range of spectral efficiencies, with the advantage of M-PAM increasing at high spectral efficiency. ACO-OFDM and PAM-DMT have practically identical performance at any spectral efficiency. They are the best OFDM formats at low spectral efficiency, whereas DC-OFDM is best at high spectral efficiency. When ACO-OFDM or PAM-DMT are allowed to use twice the symbol rate of M-PAM, these OFDM formats have better performance than M-PAM. When channel state information is unavailable at the transmitter, however, M-PAM significantly outperforms all OFDM formats. When using the same symbol rate for all modulation methods, M-PAM requires approximately three times more computational complexity per processor than all OFDM formats and 63% faster analog-to-digital converters, assuming oversampling ratios of 1.23 and 2 for ACO-OFDM and M-PAM, respectively. When OFDM uses twice the symbol rate of M-PAM, OFDM requires 23% faster analog-to-digital converters than M-PAM but OFDM requires approximately 40% less computational complexity than M-PAM per processor.
Author: Omar Jan Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
In this dissertation, a simulation study of coherent-optical OFDM (CO-OFDM) systems has been conducted. Fiber nonlinearities are the main limitation for long-haul CO-OFDM transmission. A second limitation is the high impact of laser phase noise (LPN) imposed by the large linewidth of low-cost distributed feedback (DFB) lasers. Furthermore, high-order constellations (16-QAM) combined with large OFDM symbols (1024-point inverse fast Fourier transform (IFFT)/fast Fourier transform (FFT)) increase the penalty of such impairments. The larger OFDM symbols reduce the overhead of the cyclic prefix, and high-order constellations provide high spectral efficiency. Therefore, several combination techniques have been proposed and studied to alleviate the effect of fiber nonlinearities for long-haul CO-OFDM systems and of LPN for CO-OFDM systems that use DFB lasers. The experimental demonstration of CO-OFDM systems has been achieved in this dissertation using off-line processing, where the received data are stored by a sampling oscilloscope and then evaluated using MATLAB. First, the experimental setups of a homodyne CO-OFDM system and a self-homodyne CO-OFDM system have been carried out with DFB lasers. Two-stage LPN mitigation is then proposed, for which the experimental results exhibit an improvement in the bit error ratio (BER). Second, some experiments have been carried out to investigate the impact of LPN on DFT-spread CO-OFDM systems. Furthermore, a new spectral shaping technique for DFT-spread OFDM has been experimentally studied over a distance of approximately 347 km. ; eng
Author: Mohammad Mousa Pasandi Publisher: ISBN: Category : Languages : en Pages :
Book Description
"The explosive growth of global Internet traffic has placed tremendous strain on both op-tical networks and optical transmission systems, underscoring the need for not only high-capacity transmission links but also for flexible, reconfigurable, and adaptive networks. Recent progress in complementary metal-oxide-semiconductor (CMOS) technology has facilitated the use of digital signal processing (DSP) in optical communication systems. Blessed with the revival of coherent optical transmission systems, over the past few years, DSP-enabled, software-defined optical transmission (SDOT) systems have led the funda-mental paradigm shift from inflexible optical networks to robust, reconfigurable, plug-and-play optical networks.Recently, coherent optical orthogonal frequency division multiplexing (CO-OFDM) has been intensively investigated as a promising modulation format for realizing coherent transmission systems. Although CO-OFDM has attracted significant interest in the research community, it has yet to leave a tangible impact on the commercial front due to implemen-tation shortcomings, such as excessive overhead, and susceptibility to fibre nonlinearities and frequency/phase noise.This thesis explores DSP-based solutions for CO-OFDM transmission systems, including two key original contributions. The first contribution is a novel adaptive decision-directed channel equalizer (ADDCE) that aims to reduce the required overhead in CO-OFDM transmission systems. ADDCE retrieves an estimation of the phase noise value after an initial decision making stage, by extracting and averaging the phase drift of all OFDM sub-channels, demonstrating zero-overhead phase noise compensation. Moreover, it updates the channel transfer matrix on a symbol-by-symbol basis, thus enabling a reduction in the associated overhead with pilot symbols. The second original contribution of this thesis focuses on the mitigation of the effect of the laser phase noise induced inter-carrier interfer-ence (ICI) in CO-OFDM systems. This interpolation-based ICI compensator estimates the time-domain phase noise samples using linear interpolation between the common-phase-error (CPE) estimates of consecutive OFDM symbols.The performances of the aforementioned DSP equalization schemes are numerically and experimentally studied in reduced-guard-interval dual-polarization CO-OFDM (RGI-DP-CO-OFDM) transmission systems, and are found to demonstrate superior performance over conventional equalizers (CEs). In addition, a computational complexity analysis of the pro-posed equalizers is provided, which confirms a low implementation complexity." --
Author: Dr. Ashad Ullah Qureshi Publisher: Concepts Books Publication ISBN: Category : Technology & Engineering Languages : en Pages : 30
Book Description
Optical fiber communication has emerged as a high potential substitute for communication methods such as twisted pair and coaxial wire. The main advantage of optical fiber over previous methods is to have higher capacity of data rate transmission. The conventional types of modulation and demodulation technique, which have been used through optical fiber communication system are Wavelength Division Multiplexing (WDM) technique and Dense Wavelength Division Multiplexing (DWDM) technique so far.
Author: Jingwen Zhu Publisher: ISBN: Category : Languages : en Pages :
Book Description
Long-haul optical transmission systems employing coherent optical orthogonal frequency division multiplexing (CO-OFDM) are sensitive to laser phase noise. This causes a common phase rotation and inter-carrier interference. An effective method to compensate for the phase noise is to insert an RF-pilot tone in the middle of the OFDM signal. This RF-pilot is used to reverse the phase distortion at the receiver. This thesis presents a detailed performance analysis of the RF-pilot phase noise compensation scheme in a simulated 64 Gbit/s CO-OFDM system. The effects of various parameters including laser linewidth, Mach-Zehnder modulator drive power, pilot-tosignal ratio, and fiber launch power are investigated. A comparison with the pilot-aided common phase error compensation method is provided to show the differences in the BER performance with respect to the required overhead.
Author: Iraj Sadegh Amiri Publisher: ISBN: 9781536131451 Category : Optical communications Languages : en Pages : 0
Book Description
Due to the limitation of the electrical OFDM signal and electrical Fast Fourier Transform (FFT), all-optical OFDMs have recently received much attention. Accordingly, this research study was conducted to investigate the effect of phase noise in the performance of an all-optical OFDM transmission system with 4-point FFT single mode fiber (SMF) links by considering the effects of fiber length, input laser power and a number of channels. In all optical systems, the transmitter side consists of a comb power generator, wavelength selected switch and an optical QAM generator. A comb power generator generates channels with a frequency separation of ∆f=25 GHz. Subsequently, a Wavelength Selected Switch (WSS) was used to split subcarriers and then the subcarriers were modulated individually with Optical QAM modulators. As the results show, a higher number of channels led more phase noise in terms of XPM and FWM nonlinearities, and signal power was the main factor in nonlinear fiber optics. As a consequence, there is more phase noise distortion at a higher signal power for a higher number of channels rather than the lower number of channels.
Author: Nisha Mary Joseph Publisher: ISBN: Category : Languages : en Pages : 0
Book Description
Optical - Orthogonal Frequency Division Multiplexing (OFDM) system generally employ in several communication devices such as telephone, radio, television, internet and so on. In the present days, the optical OFDM is one of the significant methods for an effective communication system. In communication technique, the channel estimation plays a major role in finding the characteristics of the channel based on the received data value. In order to manage the communication data, most of the researchers focused on the channel estimation by using different techniques like Minimum Mean Square (MMSE), Least Square, blind, semi-blind and also developed new methodologies in the coherent optical OFDM. This review paper analysed the research works based on the channel estimation algorithms of an optical OFDM and also examined the major limitation of these techniques. This paper will help the researchers to give a better solution for the present drawbacks in the coherent optical OFDM system.
Author: Srujan Mamidala
Author: Srujan Mamidala
Author: Daniel Jose Fernandes Barros
Author: Daniel Jose Fernandes Barros
Author: Omar Jan
Author: Mohammad Mousa Pasandi
Author: Dr. Ashad Ullah Qureshi
Author: Jingwen Zhu
Author: Iraj Sadegh Amiri
Author: Nisha Mary Joseph
Author: Thomas Deckert