Convert UHF RFID Tag from Passive to Semi-passive Tag Using External Power Sources PDF Download

Author: Tanvi Mehta
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
In this thesis, I present novel circuit designs that convert a Ultra High Frequency (UHF) passive Radio Frequency Identification (RFID) tag into a semi-passive RFID tag. Passive RFID tags are relatively inexpensive to purchase and to integrate into objects and devices. However, in some environments and on some objects the performance of the pure passive tags is not su cient for the intended applications. A semi-passive tag, in comparison to a pure passive tag, has signi cantly greater communication range since the semi-passive tag derives its operational power from an on-tag power source instead of just from an interrogator's communication signal. As a result, semi-passive tags have greater usability in a broad range of applications. My novel circuit designs act as an additional on-tag power source and are intended to be low-cost additions to an existing passive tag operating in the UHF (Ultra-High Frequency) frequency range. Thus, currently deployed tags may be retro tted in the eld as their intended applications change and demand greater communication range. Prototype implementations of my designs were able to increase the read range of a passive UHF RFID tag by up to 39%.

Author: Jari-Pascal Curty
Publisher: Springer Science & Business Media
ISBN: 0387447105
Category : Technology & Engineering
Languages : en
Pages : 150

View

Book Description
Radio Frequency IDentification (RFID) stores and retrieves data using devices called RFID tags: objects attached to or incorporated into a product, animal or person which communicate with an RFID reader or interrogator. This book proposes a linear two-port model for an N-stage modified-Greinacher full wave rectifier, predicting the overall conversion efficiency at low power levels where the diodes are operating near their threshold voltage. Included is an experimental procedure to measure how impedance modulation in the tag affects the signal at the reader, and a useful tool for choosing the most appropriate impedances.

Author: Jari-Pascal Curty
Publisher: Springer
ISBN: 9780387514703
Category : Technology & Engineering
Languages : en
Pages : 0

View

Book Description
Radio Frequency IDentification (RFID) stores and retrieves data using devices called RFID tags: objects attached to or incorporated into a product, animal or person which communicate with an RFID reader or interrogator. This book proposes a linear two-port model for an N-stage modified-Greinacher full wave rectifier, predicting the overall conversion efficiency at low power levels where the diodes are operating near their threshold voltage. Included is an experimental procedure to measure how impedance modulation in the tag affects the signal at the reader, and a useful tool for choosing the most appropriate impedances.

Author: Tzu Hao Li
Publisher:
ISBN:
Category : Radio frequency identification systems
Languages : en
Pages :

View

Book Description
Radio frequency identi cation (RFID) is a rapidly emerging technology that enables au- tomatic remote identi cation of objects. Passive and semi-passive RFID systems can be distinguished from other forms of wireless systems, because the RFID tags (transponders) communicate by way of backscatter. In addition, passive tags derive their energy from the RF energy emitted by the reader. RFID technology can provide a fully automated data capture and analysis system. Compared to a passive RFID system, an open platform semi-passive UHF RFID tag can provide identi cation, security, low-power (compared to a wireless sensor net- work(WSN)), medium range and medium processing speed. However, the eld of semi- passive RFID is still under development, and has yet there are no open development platforms available. This thesis develops a prototype of a semi-passive UHF RFID tag that is compatible with the leading UHF RFID standard EPCglobal Gen 2 Class 1. I alsot has the exible I2C and analog digital converter(ADC) interface, which allows the additional of external analog and digital sensors. The sensor data can be read by microcontroller and stored at memory. Standard reader can get sensor data by sending QUERY and READ command to tag. Test results of our open platform semi-passive UHF RFID tag demonstrated that it can achieve a read rate above 50% when an open platform semi-passive UHF RFID tag is placed four meters from the reader antenna and the reader output power is set to 21 dBm. In addition, the proposed semi-passive open platform RFID tag consumes very little power (4.9 mA in 2V with system frequency set to 8MHz).

Author: Sang C. Suh
Publisher: Springer Science & Business Media
ISBN: 1461473365
Category : Computers
Languages : en
Pages : 257

View

Book Description
Applied Cyber-Physical Systems presents the latest methods and technologies in the area of cyber-physical systems including medical and biological applications. Cyber-physical systems (CPS) integrate computing and communication capabilities by monitoring, and controlling the physical systems via embedded hardware and computers. This book brings together unique contributions from renowned experts on cyber-physical systems research and education with applications. It also addresses the major challenges in CPS, and then provides a resolution with various diverse applications as examples. Advanced-level students and researchers focused on computer science, engineering and biomedicine will find this to be a useful secondary text book or reference, as will professionals working in this field.

Author: Simone Zuffanelli
Publisher: Springer
ISBN: 3319620304
Category : Technology & Engineering
Languages : en
Pages : 159

View

Book Description
This book describes innovative design solutions for radio-frequency identification (RFID) tags and antennas. Focusing mainly on passive ultra-high-frequency (UHF)-RFID tag antennas, it examines novel approaches based on the use of metamaterial-inspired resonators and other resonant structures as radiating elements. It also offers an exhaustive analysis of the radiation properties of several metamaterial-inspired resonators such as the split ring resonator (SRR) and related structures. Further, it discusses in detail an innovative technology for the RFID tagging of optical discs, which has demonstrated a significant improvement over the state of the art and resulted in a patent. By covering the entire research cycle of theory, design/simulation and fabrication/evaluation of RFID tags and antennas, while also reporting on cutting-edge technologies, the book provides graduate students, researchers and practitioners alike with a comprehensive and timely overview of RFID systems, and a closer look at several radiating structures.

Author: Daniel Dobkin
Publisher: Newnes
ISBN: 0123948304
Category : Technology & Engineering
Languages : en
Pages : 540

View

Book Description
This book explains how UHF tags and readers communicate wirelessly. It gives an understanding of what limits the read range of a tag, how to increase it (and why that might result in breaking the law), and the practical things that need to be addressed when designing and implementing RFID technology. Avoiding heavy math but giving breadth of coverage with the right amount of detail, it is an ideal introduction to radio communications for engineers who need insight into how tags and readers work. New to this edition: • Examples of near-metal antenna techniques • Discussion of the wakeup challenge for battery-assisted tags, with a BAT architecture example • Latest development of protocols: EPC Gen 1.2.0 • Update 18000-6 discussion with battery-assisted tags, sensor tags, Manchester tags and wakeup provisions Named a 2012 Notable Computer Book for Computer Systems Organization by Computing Reviews The only book to give an understanding of radio communications, the underlying technology for radio frequency identification (RFID) Praised for its readability and clarity, it balances breadth and depth of coverage New edition includes latest developments in chip technology, antennas and protocols

Author: Himanshu B. Soni
Publisher: Universal-Publishers
ISBN: 1612330029
Category :
Languages : en
Pages : 1074

View

Book Description
The International Conference on Signals, Systems and Automation (ICSSA 2011) aims to spread awareness in the research and academic community regarding cutting-edge technological advancements revolutionizing the world. The main emphasis of this conference is on dissemination of information, experience, and research results on the current topics of interest through in-depth discussions and participation of researchers from all over the world. The objective is to provide a platform to scientists, research scholars, and industrialists for interacting and exchanging ideas in a number of research areas. This will facilitate communication among researchers in different fields of Electronics and Communication Engineering. The International Conference on Intelligent System and Data Processing (ICISD 2011) is organized to address various issues that will foster the creation of intelligent solutions in the future. The primary goal of the conference is to bring together worldwide leading researchers, developers, practitioners, and educators interested in advancing the state of the art in computational intelligence and data processing for exchanging knowledge that encompasses a broad range of disciplines among various distinct communities. Another goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working in India and abroad.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
A secure optionally passive RFID tag or sensor system comprises a passive RFID tag having means for receiving radio signals from at least one base station and for transmitting radio signals to at least one base station, where the tag is capable of being powered exclusively by received radio energy, and an external power and data logging device having at least one battery and electronic circuitry including a digital memory configured for storing and recalling data. The external power and data logging device has a means for powering the tag, and also has a means.

Author: Vignesh Rajan Elangovan
Publisher: LAP Lambert Academic Publishing
ISBN: 9783659583209
Category :
Languages : en
Pages : 52

View

Book Description
The Radio frequency identification (RFID) technology essentially consists of the reader, tag and host computer.Since the passive RFID tag does not have its own power source, therefore, the continuous sending signal by the RFID reader's antenna through the air acting as activate the tag to send the information to the reader.This Research Presents small low cost passive UHF -RFID tag prototype has been designed and applied for metallic object it can also be used in tracing and tracking object it can be used in logistics and supply chain.The tag can modified into non-metallic application such that tag can be attached to the clothes of humans for tacking and it also can be used in identification of animals, While the tag antenna presented in this project are designed to be as simple as possible with low cost.