Author: Publisher:
ISBN:
Category : Diesel motor
Languages : en
Pages : 16
Book Description
Control Oriented Model and Dynamometer Testing for a Single-cylinder, Heated-air HCCI Engine
Author: Modeling and Control of Single Cylinder HCCI Engine
Author: Varun TandraPublisher:
ISBN:
Category :
Languages : en
Pages : 218
Book Description
With growing environmental concern, energy consumption has become a key element in the current debate on global warming. Over the past two decades, Homogeneous Charge Compression Ignition (HCCI) engine technology has aroused a great deal of interest in the automotive sector owing to its fuel flexibility and ability to generate ultra-low exhaust emissions. One of the strategies to achieve ultra-low emissions in HCCI engines is to retain some exhaust gas/burnt products in the cylinder by dynamically actuating/varying valve opening and closing timings and lifts. This can be achieved by recent advancements in microprocessor, actuators and controller technologies. The first step in the synthesis of control algorithms involves developing simple system-level mathematical models. This thesis presents two such mathematical models of HCCI combustion. In the first part of this thesis, a control-oriented two-zone thermo-kinetic model of a single cylinder HCCI engine is presented. Earlier control laws were derived using single zone mathematical models of HCCI combustion; however, such models fail to accurately capture the combustion dynamics of an HCCI engine owing to the assumption of homogeneous composition and temperature in the cylinder. Certain multi-zone models of HCCI engines emphasizing the shortcomings of these single zone models have also been reported in literature. However, such models are far too complex and unwieldy for the development of fast and efficient controllers for HCCI engines. The present work outlines the modeling approach of a physics based two-zone model of a single-cylinder HCCI engine by incorporating the first law of thermodynamics and the temperature and concentration inhomogeneities within the cylinder in order to better predict emissions, peak pressures, and timing. A comparative analysis between the single zone and two-zone models is also discussed. The nonlinear model was linearized about an operating point to facilitate the development of an effective LQR regulator. The model inputs include variable valve timing to effectively control peak pressures, exhaust temperatures and ignition timing. In the second part of the thesis we address the shortcomings of control analysis which to date has been done by developing models that are engine specific, such models often rely on extensive parameters which are to be experimentally identified. Moreover, further investigation revealed that these models were valid only for a narrow operating range. Therefore, a detailed mathematical model of an HCCI engine, which is fuel flexible and valid for transitions in engine speed, is developed based on ideal gas laws and basic thermodynamics and conservation principles. The different engine subsystems and engine phenomena discretized into eight stages are modeled in a "control-oriented sense" to address the combustion timing, peak pressure and heat release rate control issues. The model has been implemented in MATLAB® to facilitate simulation studies and requires minimum tuning parameters to be experimentally recognized. Model validation is based on three sets of engine data, obtained from literature. The validation suggests that the model, once tuned properly, shows a fair agreement between the simulation and experimental data for a given engine and operating conditions.
Thermodynamic Based Modeling for Nonlinear Control of Combustion Phasing in HCCI Engines
Author: Joshua Bradley BettisPublisher:
ISBN:
Category : Chemical kinetics
Languages : en
Pages : 0
Book Description
"Low temperature combustion modes, such as Homogeneous Charge Compression Ignition (HCCI), represent a promising means to increase the efficiency and significantly reduce the emissions of internal combustion engines. Implementation and control are difficult, however, due to the lack of an external combustion trigger. This thesis outlines a nonlinear control-oriented model of a single cylinder HCCI engine, which is physically based on a five state thermodynamic cycle. This model is aimed at capturing the behavior of an engine which utilizes fully vaporized gasoline-type fuels, exhaust gas recirculation and intake air heating in order to achieve HCCI operation. The onset of combustion, which is vital for control, is modeled using an Arrhenius Reaction Rate expression which relates the combustion timing to both charge dilution and temperature. To account for a finite HCCI combustion event, the point of constant volume combustion is shifted for SOC to a point of high energy release based on experimental heat release data. The model is validated against experimental data form a single cylinder CI engine operating under HCCI conditions at two different fueling rates. Parameters relevant to control such as combustion timing agree very well with the experiment at both operating conditions. The extension of the model to other fuels is also investigated via the Octane Index (OI) of several different gasoline-type fuels. Since this nonlinear model is developed from a controls perspective, both the output and state update equations are formulated such that they are functions of only the control inputs and state variables, therefore making them directly applicable to state space methods for control. The result is a discrete-time nonlinear control model which provides a platform for developing and validating various nonlinear control strategies"--Abstract, leaf iv
Introduction to Modeling and Control of Internal Combustion Engine Systems
Author: Lino GuzzellaPublisher: Springer Science & Business Media
ISBN: 3662080036
Category : Technology & Engineering
Languages : en
Pages : 303
Book Description
Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.
A New Transient Dynamometer Test System for Cold Start Testing and Controls Development
Author: Brian D. KrosschellDynamometer
Author: Jyotindra S. KilledarPublisher: Xlibris Corporation
ISBN: 1477120084
Category : Technology & Engineering
Languages : en
Pages : 609
Book Description
It all began way back in 1984 when I began my career in the field of dynamometer and engine testing when after years of gut-feeling and study I realized that there is a need for a book on dynamometer and its application to engine testing. As automotive and dynamometer industry is growing worldwide the concern eventually became so great I felt a book devoted to the subject was warranted. The book Dynamometer-Theory and Application to Engine Testing is a book dedicated to various dynamometers and how they are applied to engine testing. The book also discusses the essentials of modern test cell and the instrumentation, data acquisition system and other accessories that are employed in modern test cell. After having worked in the filed of industrial compressors, pumps, material handling equipment, dynamometer field and software industry I decided to write this book which will help the people working in the automotive industry, engine and vehicle testing, people working in the dynamometer and instrumentation industry and electrical motor industry. The book will be of interest to the studenrs of mechanical and automobile engineering. The book will be of great value to the incumbents entering in the automotive and dynamometer fields.
DI-HCCI Engine Control System Development
Author: Kushal NarayanaswamyPublisher:
ISBN:
Category :
Languages : en
Pages : 226
Book Description
Inflation - Kaufkraft - Wechselkurs
Author: HCCI and CAI Engines for the Automotive Industry
Author: Hua ZhaoPublisher: CRC Press
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 562
Book Description
Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality. HCCI a.
Control Strategies for HCCI Mixed-Mode Combustion
Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Delphi Automotive Systems and ORNL established this CRADA to expand the operational range of Homogenous Charge Compression Ignition (HCCI) mixed-mode combustion for gasoline en-gines. ORNL has extensive experience in the analysis, interpretation, and control of dynamic engine phenomena, and Delphi has extensive knowledge and experience in powertrain compo-nents and subsystems. The partnership of these knowledge bases was important to address criti-cal barriers associated with the realistic implementation of HCCI and enabling clean, efficient operation for the next generation of transportation engines. The foundation of this CRADA was established through the analysis of spark-assisted HCCI data from a single-cylinder research engine. This data was used to (1) establish a conceptual kinetic model to better understand and predict the development of combustion instabilities, (2) develop a low-order model framework suitable for real-time controls, and (3) provide guidance in the initial definition of engine valve strategies for achieving HCCI operation. The next phase focused on the development of a new combustion metric for real-time characterization of the combustion process. Rapid feedback on the state of the combustion process is critical to high-speed decision making for predictive control. Simultaneous to the modeling/analysis studies, Delphi was focused on the development of engine hardware and the engine management system. This included custom Delphi hardware and control systems allowing for flexible control of the valvetrain sys-tem to enable HCCI operation. The final phase of this CRADA included the demonstration of conventional and spark assisted HCCI on the multi-cylinder engine as well as the characterization of combustion instabilities, which govern the operational boundaries of this mode of combustion. ORNL and Delphi maintained strong collaboration throughout this project. Meetings were held on a bi-weekly basis with additional reports, presentation, and meetings as necessary to maintain progress. Delphi provided substantial support through modeling, hardware, data exchange, and technical consultation. This CRADA was also successful at establishing important next steps to further expanding the use of an HCCI engine for improved fuel efficiency and emissions. These topics will be address in a follow-on CRADA. The objectives are: (1) Improve fundamental understanding of the development of combustion instabilities with HCCI operation through modeling and experiments; (2) Develop low-order model and feedback combustion metrics which are well suited to real-time predictive controls; and (3) Construct multi-cylinder engine system with advanced Delphi technologies and charac-terize HCCI behavior to better understand limitations and opportunities for expanded high-efficiency operation.