Composite Behaviour of Normalweight and Lightweight Concrete Panels With Partially Embedded Light-Gauge Steel Channels PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Composite Behaviour of Normalweight and Lightweight Concrete Panels With Partially Embedded Light-Gauge Steel Channels PDF full book. Access full book title Composite Behaviour of Normalweight and Lightweight Concrete Panels With Partially Embedded Light-Gauge Steel Channels by Akram Khan. Download full books in PDF and EPUB format.
Author: Akram Khan Publisher: ISBN: Category : Plates (Engineering) Languages : en Pages : 250
Book Description
This research investigates prefabricated light-gauge steel and concrete panels using reliable and commercially viable shear connectors. An analytical and experimental investigation was undertaken to study the flexural behaviour of light-gauge steel and concrete composite panels under uniform pressure. Normalweight and lightweight concrete panels were fabricated by embedding 16-gauge 41 mm x 203 mm steel channel sections (running parallel to each other) to a depth of 38 mm into a 64 mm thick concrete slab. Push-out tests were also conducted to evaluate the efficiency of three types of shear connection mechanism; natural surface bonding, predrilled holes, and punched holes. Only two types of shear connectors (predrilled holes and punched holes) were used in the full-scale panel specimens. Results show that the predrilled holes and punched holes provide full shear transfer between the steel and concrete. The ultimate load carrying capacity of the lightweight concrete panels exhibited similar behaviour to the normalweight concrete panels. All the panels exhibited good load carrying capacity and ductility, and satisfied the serviceability limit state of deflection. Thus, the proposed panels present a potential for a commercially viable composite floor system for building construction utilizing a maximum span of 2330 mm.
Author: Akram Khan Publisher: ISBN: Category : Plates (Engineering) Languages : en Pages : 250
Book Description
This research investigates prefabricated light-gauge steel and concrete panels using reliable and commercially viable shear connectors. An analytical and experimental investigation was undertaken to study the flexural behaviour of light-gauge steel and concrete composite panels under uniform pressure. Normalweight and lightweight concrete panels were fabricated by embedding 16-gauge 41 mm x 203 mm steel channel sections (running parallel to each other) to a depth of 38 mm into a 64 mm thick concrete slab. Push-out tests were also conducted to evaluate the efficiency of three types of shear connection mechanism; natural surface bonding, predrilled holes, and punched holes. Only two types of shear connectors (predrilled holes and punched holes) were used in the full-scale panel specimens. Results show that the predrilled holes and punched holes provide full shear transfer between the steel and concrete. The ultimate load carrying capacity of the lightweight concrete panels exhibited similar behaviour to the normalweight concrete panels. All the panels exhibited good load carrying capacity and ductility, and satisfied the serviceability limit state of deflection. Thus, the proposed panels present a potential for a commercially viable composite floor system for building construction utilizing a maximum span of 2330 mm.
Author: Andrew H. Buchanan Publisher: John Wiley & Sons ISBN: 0470972890 Category : Technology & Engineering Languages : en Pages : 437
Book Description
Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Author: Darko Dujmovic Publisher: John Wiley & Sons ISBN: 343303107X Category : Technology & Engineering Languages : de Pages : 924
Book Description
The use of composite structures in construction is increasing. The optimized combination of the two materials concrete and steel produces particularly cost-efficient structures. This book presents a large number of numerical examples with detailed explanations of the provisions of Eurocode 4. It deals with the most common structural components in building construction: beams, columns and slabs. Furthermore, comprehensive chapters provide insight into the topics of creep and shrinkage, as well as fatigue. This book enables the reader to efficiently perform analyses of composite structures. It is a valuable reference book for professionals as well as an outstanding means for students to become familiar with the Eurocode 4.
Author: National Research Council Publisher: National Academies Press ISBN: 0309022339 Category : Technology & Engineering Languages : en Pages : 53
Book Description
Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.
Author: Chanakya Arya Publisher: CRC Press ISBN: 0203926501 Category : Technology & Engineering Languages : en Pages : 523
Book Description
This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites. It provides design principles and guidance in line with both British Standards and Eurocodes, current as of late 2007. Topics discussed include the philosophy of design, basic structural concepts, and material properties. After an introduction and overview of structural design, the book is conveniently divided into sections based on British Standards and Eurocodes.
Author: Thomas C. Jester Publisher: Getty Publications ISBN: 1606063251 Category : Architecture Languages : en Pages : 354
Book Description
Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Author: Kaustubh Dasgupta Publisher: Springer Nature ISBN: 3030551156 Category : Technology & Engineering Languages : en Pages : 959
Book Description
This book gathers peer-reviewed contributions presented at the 1st International Conference on Structural Engineering and Construction Management (SECON’20), held in Angamaly, Kerala, India, on 14-15 May 2020. The meeting served as a fertile platform for discussion, sharing sound knowledge and introducing novel ideas on issues related to sustainable construction and design for the future. The respective contributions address various aspects of numerical modeling and simulation in structural engineering, structural dynamics and earthquake engineering, advanced analysis and design of foundations, BIM, building energy management, and technical project management. Accordingly, the book offers a valuable, up-to-date tool and essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.
Author: Akram Khan
Author: Akram Khan
Author: Akram Khan
Author: Lei Shi
Author: Andrew H. Buchanan
Author: Venkatesh Kodur
Author: Darko Dujmovic
Author: National Research Council
Author: Chanakya Arya
Author: Thomas C. Jester
Author: Kaustubh Dasgupta