Author: WJ. Daniels
Publisher:
ISBN:
Category : Alloys
Languages : en
Pages : 15
Book Description
The testing of materials for stress corrosion cracking (SCC) in a use environment involves the risk that cracking may not be found by the test technique. When this happens, immunity to SCC may be incorrectly concluded. To avoid this type of error, the use of multiple testing techniques is recommended.
Comparative Findings Using the Slow Strain-Rate, Constant Flow Stress, and U-Bend Stress Corrosion Cracking Techniques
Author: WJ. Daniels
Publisher:
ISBN:
Category : Alloys
Languages : en
Pages : 15
Book Description
The testing of materials for stress corrosion cracking (SCC) in a use environment involves the risk that cracking may not be found by the test technique. When this happens, immunity to SCC may be incorrectly concluded. To avoid this type of error, the use of multiple testing techniques is recommended.
Publisher:
ISBN:
Category : Alloys
Languages : en
Pages : 15
Book Description
The testing of materials for stress corrosion cracking (SCC) in a use environment involves the risk that cracking may not be found by the test technique. When this happens, immunity to SCC may be incorrectly concluded. To avoid this type of error, the use of multiple testing techniques is recommended.
Stress Corrosion Cracking-the Slow Strain-rate Technique
Author: G. M. Ugiansky
Publisher: ASTM International
ISBN:
Category :
Languages : en
Pages : 446
Book Description
Publisher: ASTM International
ISBN:
Category :
Languages : en
Pages : 446
Book Description
Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking
Author: R. D. Kane
Publisher: ASTM International
ISBN: 0803118708
Category : Alloys
Languages : en
Pages : 298
Book Description
In order to predict when and how a material will crack under environmental conditions, engineers used to subject it to pressure for a long time, up to a year in cases; about 20 years ago, a testing method was developed that slowly but inexorably increases the pressure, which seems to cut down the ti
Publisher: ASTM International
ISBN: 0803118708
Category : Alloys
Languages : en
Pages : 298
Book Description
In order to predict when and how a material will crack under environmental conditions, engineers used to subject it to pressure for a long time, up to a year in cases; about 20 years ago, a testing method was developed that slowly but inexorably increases the pressure, which seems to cut down the ti
Current Engineering Practice
Stress Corrosion Cracking--the Slow Strain-rate Technique
Author: National Association of Corrosion Engineers. TPC Committee T-3E on Stress Corrosion Cracking of Metallic Materials
Publisher: Philadelphia : ASTM
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 460
Book Description
Publisher: Philadelphia : ASTM
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 460
Book Description
Stress Corrosion Cracking - the Slow Strain-rate Technique
Author: G. M. Ugiansky
Publisher:
ISBN: 9780466500023
Category :
Languages : en
Pages : 442
Book Description
Publisher:
ISBN: 9780466500023
Category :
Languages : en
Pages : 442
Book Description
Slow Strain-Rate Technique
Author: GJ. Theus
Publisher:
ISBN:
Category : Alloys
Languages : en
Pages : 16
Book Description
This paper describes slow strain-rate test equipment, operable at elevated temperatures and pressures, that includes electrochemical potential control capability. Applications in caustic stress corrosion cracking (SCC) studies of both nuclear steam generator and fossil boiler materials are presented. Electrochemical potential regions for stress corrosion cracking of Inconel alloy 600, Incoloy alloy 800, and Type 304 stainless steel are compared to results obtained using constant load specimens. Tests with titanium stabilized Alloy 800 (Sanicro 30) tubular specimens also demonstrate the effect of potential on cracking mode. A comparison of SCC test results, using both long term exposure tests and short term straining electrode tests, is made between a mild steel and its weld metal. In these examples, favorable comparisons are obtained with tests using conventional methods, proving the value and usefulness of the slow straining device in accelerating SCC studies and in defining more accurately conditions under which SCC can occur.
Publisher:
ISBN:
Category : Alloys
Languages : en
Pages : 16
Book Description
This paper describes slow strain-rate test equipment, operable at elevated temperatures and pressures, that includes electrochemical potential control capability. Applications in caustic stress corrosion cracking (SCC) studies of both nuclear steam generator and fossil boiler materials are presented. Electrochemical potential regions for stress corrosion cracking of Inconel alloy 600, Incoloy alloy 800, and Type 304 stainless steel are compared to results obtained using constant load specimens. Tests with titanium stabilized Alloy 800 (Sanicro 30) tubular specimens also demonstrate the effect of potential on cracking mode. A comparison of SCC test results, using both long term exposure tests and short term straining electrode tests, is made between a mild steel and its weld metal. In these examples, favorable comparisons are obtained with tests using conventional methods, proving the value and usefulness of the slow straining device in accelerating SCC studies and in defining more accurately conditions under which SCC can occur.
Five-year Index to ASTM Technical Papers and Reports
Author: American Society for Testing and Materials
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 408
Book Description
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 408
Book Description
Corrosion
Author:
Publisher:
ISBN:
Category : Corrosion and anti-corrosives
Languages : en
Pages : 570
Book Description
Issues include special section called Corrosion abstracts.
Publisher:
ISBN:
Category : Corrosion and anti-corrosives
Languages : en
Pages : 570
Book Description
Issues include special section called Corrosion abstracts.
ASTM Standardization News
Author: American Society for Testing and Materials
Publisher:
ISBN:
Category : Standardization
Languages : en
Pages : 1002
Book Description
Publisher:
ISBN:
Category : Standardization
Languages : en
Pages : 1002
Book Description