Combined Punching Shear and Torsional Shear in Reinforced Concrete Slabs PDF Download

Author: Woo Kim
Publisher:
ISBN:
Category : Concrete slabs
Languages : en
Pages : 238

View

Book Description

Author: FIB - Féd. Int. du Béton
Publisher: FIB - Féd. Int. du Béton
ISBN: 2883941211
Category : Technology & Engineering
Languages : en
Pages : 396

View

Book Description
fib Bulletin 81 reports the latest information available to researchers and practitioners on the analysis, design and experimental evidence of punching shear of structural concrete slabs. It follows previous efforts by the International Federation for Structural Concrete (fib) and its predecessor the Euro-International Committee for Concrete (CEB), through CEB Bulletin 168, Punching Shear in Reinforced Concrete (1985) and fibBulletin 12, Punching of structural concrete slabs (2001), and an international symposium sponsored by the punching shear subcommittee of ACI Committee 445 (Shear and Torsion) and held in Kansas City, Mo., USA, in 2005. This bulletin contains 18 papers that were presented in three sessions as part of an international symposium held in Philadelphia, Pa., USA, on October 25, 2016. The symposium was co-organized by the punching shear sub-committee of ACI 445 and by fib Working Party 2.2.3 (Punching and Shear in Slabs) with the objectives of not only disseminating information on this important design subject but also promoting harmonization among the various design theories and treatment of key aspects of punching shear design. The papers are organized in the same order they were presented in the symposium. The symposium honored Professor Emeritus Neil M. Hawkins (University of Illinois at Urbana-Champaign, USA), whose contributions through the years in the field of punching shear of structural concrete slabs have been paramount. The papers cover key aspects related to punching shear of structural concrete slabs under different loading conditions, the study of size effect on punching capacity of slabs, the effect of slab reinforcement ratio on the response and failure mode of slabs, without and with shear reinforcement, and its implications for the design and formulation in codes of practice, an examination of different analytical tools to predict the punching shear response of slabs, the study of the post-punching response of concrete slabs, the evaluation of design provisions in modern codes based on recent experimental evidence and new punching shear theories, and an overview of the combined efforts undertaken jointly by ACI 445 and fib WP 2.2.3 to generate test result databanks for the evaluation and calibration of punching shear design recommendations in North American and international codes of practice.

Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1468451979
Category : Science
Languages : en
Pages : 407

View

Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Author: Maria Anna Polak
Publisher:
ISBN:
Category : Concrete slabs
Languages : en
Pages : 320

View

Book Description

Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 231

View

Book Description

Author: Raymond Ian Gilbert
Publisher: CRC Press
ISBN: 1466572779
Category : Technology & Engineering
Languages : en
Pages : 710

View

Book Description
The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concret

Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883941327
Category : Technology & Engineering
Languages : en
Pages : 242

View

Book Description
In December 1996, CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in June 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. Finally, as a result of the restructuring of fib’s Commissions and Task Groups at the end of 2014, the Task Group became fib T5.1 FRP Reinforcement for concrete structures, chaired by Stijn Matthys at Ghent University, in Commission 5 Reinforcements. The work of former TG 9.3 and current T5.1 was performed by two working parties (WP), one of which is “Externally Applied Reinforcement” (EAR), which produced fib bulletin 14 “Externally bonded FRP reinforcement for RC structures” in July 2001. Following a number of years of relatively slow activity, the WP on externally applied reinforcement was reactivated and started working on an update of bulletin 14. The result of this work is summarised in the present technical report, which aims to give design guidelines on the use of externally applied FRP reinforcement (both externally bonded and near-surface mounted) for concrete structures. An attempt has been made to present some of the topics in a Eurocode-compatible format, so that the material covered may form the basis for the introduction of composites in the next version of Eurocode 2 and for the updating of the text on seismic retrofitting with composites in the next version of Eurocode 8. All persons who participated in the preparation of this Bulletin are mentioned in the copyright page. Further acknowledgements are due to Josée Bastien (Canada), Hans Rudolf Ganz (Switzerland) and Luc Taerwe (Belgium) for revision of the document. To all members of the working party on externally applied reinforcement our sincere thanks are expressed for the high quality and extensive work brought in on a voluntary basis.

Author: Sanjaya Kumar Patro
Publisher: Techsar Pvt. Ltd.
ISBN: 9385909568
Category : Technology & Engineering
Languages : en
Pages : 344

View

Book Description
Veer Surendra Sai University of Technology (VSSUT), Burla is one among the foremost universities of India in the field of higher education, basic and applied research. The foundation of this iconic college was laid in 1956 to cater the maintenance and upkeep of the mighty Hirakud Dam (worlds longest earth dam) at Burla. The university now has sixteen academic departments ion various disciplines in engineering and sciences. The International Conference on Advances in Mechanics and Materials (ICRAMM-2016), was organized at the Veer Surendra Sai University of Technology, Burla, Odisha during 17-18 December, 2016. Over the years, tremendous progress has been made in the fields related to mechanics and materials due to rapid advancements in analytical, experimental and computational facilities. The outcome has immensely benefited the industries, research and academic organizations in numerous ways. The International Conference on Recent Advances in Mechanics and Materials (ICRAMM-2016) will provide a common platform for academicians, engineers, scientists and technologists to come together and discuss the progress made on various aspects of mechanics and materials. Realizing the importance of recent developments in the areas of recent advances in mechanics and materials, the conference ICRAMM 2016, focuses on following major themes: Computational mechanics, Experimental mechanics, Fluid mechanics, Geomechanics, Structural mechanics, Continuum mechanics, Coupled field problems, Structural and Soil Dynamics, Vibration Control, Structural Health Monitoring, Rehabilitation and Retrofitting of structures, Composite Materials, Cement Concrete Composites and Sustainable construction materials. The papers included in this conference proceeding reflect in general the need for emerging technologies and growing interest in structural mechanics and materials to tailor it to meet the requirements for the varying application.

Author: Alan Williams
Publisher: Simon and Schuster
ISBN: 1591268478
Category : Technology & Engineering
Languages : en
Pages : 656

View

Book Description
"The NCEES SE Exam is Open Book - You Will Want to Bring This Book Into the Exam. Alan Williams' PE Structural Reference Manual Tenth Edition (STRM10) offers a complete review for the NCEES 16-hour Structural Engineering (SE) exam. This book is part of a comprehensive learning management system designed to help you pass the PE Structural exam the first time. PE Structural Reference Manual Tenth Edition (STRM10) features include: Covers all exam topics and provides a comprehensive review of structural analysis and design methods New content covering design of slender and shear walls Covers all up-to-date codes for the October 2021 Exams Exam-adopted codes and standards are frequently referenced, and solving methods—including strength design for timber and masonry—are thoroughly explained 270 example problems Strengthen your problem-solving skills by working the 52 end-of-book practice problems Each problem’s complete solution lets you check your own solving approach Both ASD and LRFD/SD solutions and explanations are provided for masonry problems, allowing you to familiarize yourself with different problem solving methods. Topics Covered: Bridges Foundations and Retaining Structures Lateral Forces (Wind and Seismic) Prestressed Concrete Reinforced Concrete Reinforced Masonry Structural Steel Timber Referenced Codes and Standards - Updated to October 2021 Exam Specifications: AASHTO LRFD Bridge Design Specifications (AASHTO) Building Code Requirements and Specification for Masonry Structures (TMS 402/602) Building Code Requirements for Structural Concrete (ACI 318) International Building Code (IBC) Minimum Design Loads for Buildings and Other Structures (ASCE 7) National Design Specification for Wood Construction ASD/LRFD and National Design Specification Supplement, Design Values for Wood Construction (NDS) North American Specification for the Design of Cold-Formed Steel Structural Members (AISI) PCI Design Handbook: Precast and Prestressed Concrete (PCI) Seismic Design Manual (AISC 327) Special Design Provisions for Wind and Seismic with Commentary (SDPWS) Steel Construction Manual (AISC 325)

Author: Prab Bhatt
Publisher: CRC Press
ISBN: 0203404386
Category : Technology & Engineering
Languages : en
Pages : 796

View

Book Description
Setting out design theory for concrete elements and structures and illustrating the practical applications of the theory, the third edition of this popular textbook has been extensively rewritten and expanded to conform to the latest versions of BS8110 and EC2. It includes more than sixty clearly worked out design examples and over 600 diagrams, plans and charts as well as giving the background to the British Standard and Eurocode to explain the ‘why’ as well as the ‘how’ and highlighting the differences between the codes. New chapters on prestressed concrete and water retaining structures are included and the most commonly encountered design problems in structural concrete are covered. Invaluable for students on civil engineering degree courses; explaining the principles of element design and the procedures for the design of concrete buildings, its breadth and depth of coverage also make it a useful reference tool for practising engineers.