Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Characterization of Diamond-like Carbon Films Produced by Pulsed Laser Deposition
Characterization of Diamond-like Carbon Films Produced by Pulsed Laser Depostition
Synthesis and Characterization of Diamond-like Carbon Thin Films for Biomedical Applications
Author: Russell Lee Leonard
Publisher:
ISBN:
Category :
Languages : en
Pages : 91
Book Description
Diamond-like carbon (DLC) thin films were produced by pulsed laser deposition (PLD) on silicon, fused silica, and silicon nitride substrates. The films produced were either undoped, made using a pure graphite target, or doped, using multi-component targets made from a combination of graphite and silicon, silicon nitride, titanium dioxide, or silicon monoxide. These films were evaluated for their potential use in biomedical applications, including coatings for artificial joints, heart stents, and bronchoscopes. The films were characterized by Raman spectroscopy, atomic force microscopy, ball-on-flat tribometry, contact angle measurements, and spectrophotometry. Film thickness was determined by optical profilometry. Film adhesion was checked by soaking the films in simulated body fluid (SBF) and monitoring the quality of the film surface at varying time intervals using an optical microscope. DLC coatings were produced with a root mean square surface roughness of less than 1 nm and a 0.08 lubricated coefficient of friction. Contact angles of water on the undoped films varied with deposition conditions, ranging from 65 to 88 degrees. Contact angles as low as 25 degrees were achieved by incorporating silicon monoxide dopant. DLC coatings were produced on fused silica having high transparency and showing no delamination after forty-three weeks of immersion in SBF. These results indicate that these films have potential as biomedical coatings.
Publisher:
ISBN:
Category :
Languages : en
Pages : 91
Book Description
Diamond-like carbon (DLC) thin films were produced by pulsed laser deposition (PLD) on silicon, fused silica, and silicon nitride substrates. The films produced were either undoped, made using a pure graphite target, or doped, using multi-component targets made from a combination of graphite and silicon, silicon nitride, titanium dioxide, or silicon monoxide. These films were evaluated for their potential use in biomedical applications, including coatings for artificial joints, heart stents, and bronchoscopes. The films were characterized by Raman spectroscopy, atomic force microscopy, ball-on-flat tribometry, contact angle measurements, and spectrophotometry. Film thickness was determined by optical profilometry. Film adhesion was checked by soaking the films in simulated body fluid (SBF) and monitoring the quality of the film surface at varying time intervals using an optical microscope. DLC coatings were produced with a root mean square surface roughness of less than 1 nm and a 0.08 lubricated coefficient of friction. Contact angles of water on the undoped films varied with deposition conditions, ranging from 65 to 88 degrees. Contact angles as low as 25 degrees were achieved by incorporating silicon monoxide dopant. DLC coatings were produced on fused silica having high transparency and showing no delamination after forty-three weeks of immersion in SBF. These results indicate that these films have potential as biomedical coatings.
Structural and Electrical Characterization of Highly-tetrahedral- Coordinated Diamond-like Carbon Films Grown by Pulsed-laser Deposition
Synthesis and characterization of diamond-like carbon thin films prepared by pulsed laser deposition method
Author: Jaanus Eskusson
Publisher:
ISBN: 9789949191291
Category :
Languages : en
Pages : 116
Book Description
Publisher:
ISBN: 9789949191291
Category :
Languages : en
Pages : 116
Book Description
Pulsed-Laser Deposited Amorphous Diamond and Related Materials
Tribology of Diamond-like Carbon Films
Author: Christophe Donnet
Publisher: Springer Science & Business Media
ISBN: 0387498915
Category : Technology & Engineering
Languages : en
Pages : 673
Book Description
This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.
Publisher: Springer Science & Business Media
ISBN: 0387498915
Category : Technology & Engineering
Languages : en
Pages : 673
Book Description
This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.
Synthesis and Characterization of Diamond-like Carbon Coatings Deposited by Plasma Source Ion Implantation and Conventional Ion Beam Assisted Deposition Processes
Author: Brian M. Stout
Publisher:
ISBN:
Category :
Languages : en
Pages : 114
Book Description
Diamond-like carbon coatings produced by Plasma Source Ion Implantation (PSII) and beamline Ion Beam Assisted Deposition (IBAD) were synthesized and studied. Gas pressure and electrical current were used as variables to design four independent PSII test sets. Beamline IBAD samples were produced with a pre-optimized set of parameters. Profilometry measurements showed the films to have thicknesses between 1.44 +/- 09 and 1.64 +/- 04 microns and to possess very low roughness averages, ranging from 14 +/- 3 to 28 +/- 3 nm, which correlate with substrate surface roughness. Atomic Force Microscopy revealed that diamond-like carbon crystal sizes varied significantly with chamber pressure. Crystals were generally spherical in shape suggesting that films were highly amorphous. Microhardness and nanohardness test results showed the hardest films to be greater than 3 times the hardness of untreated steel. The elastic modulus of the films, measured during the nanohardness test, was directly related to film hardness. Fretting wear and Pin-on-Disk tests were performed to quantitatively assess the ability of films to resist wear. Fretting wear tests showed a dramatic decrease in friction for diamond-like carbon films with friction levels ranging from 10% to 30% of that of untreated steel. Pin-on-Disk tests revealed a significant improvement in wear resistance prior to stylus penetration into the substrate.
Publisher:
ISBN:
Category :
Languages : en
Pages : 114
Book Description
Diamond-like carbon coatings produced by Plasma Source Ion Implantation (PSII) and beamline Ion Beam Assisted Deposition (IBAD) were synthesized and studied. Gas pressure and electrical current were used as variables to design four independent PSII test sets. Beamline IBAD samples were produced with a pre-optimized set of parameters. Profilometry measurements showed the films to have thicknesses between 1.44 +/- 09 and 1.64 +/- 04 microns and to possess very low roughness averages, ranging from 14 +/- 3 to 28 +/- 3 nm, which correlate with substrate surface roughness. Atomic Force Microscopy revealed that diamond-like carbon crystal sizes varied significantly with chamber pressure. Crystals were generally spherical in shape suggesting that films were highly amorphous. Microhardness and nanohardness test results showed the hardest films to be greater than 3 times the hardness of untreated steel. The elastic modulus of the films, measured during the nanohardness test, was directly related to film hardness. Fretting wear and Pin-on-Disk tests were performed to quantitatively assess the ability of films to resist wear. Fretting wear tests showed a dramatic decrease in friction for diamond-like carbon films with friction levels ranging from 10% to 30% of that of untreated steel. Pin-on-Disk tests revealed a significant improvement in wear resistance prior to stylus penetration into the substrate.
Pulsed Laser Deposition of Diamond-like Carbon Films
Author: Deborah Lynn Thebert-Peeler
Publisher:
ISBN:
Category : Crystal growth
Languages : en
Pages : 234
Book Description
Publisher:
ISBN:
Category : Crystal growth
Languages : en
Pages : 234
Book Description