Characterization and Design of Voltage-mode Controlled Full-bridge DC/DC Converter with Current Limit PDF Download

Author: Nathaniel R. Smith
Publisher:
ISBN:
Category : DC-to-DC converters
Languages : en
Pages : 66

View

Book Description
Advancements in Direct Current (DC) electrical power systems have enabled new functionality in many, varied applications. Discrete power semiconductor devices are increasing in efficiency, switching frequency, and power density, resulting in greater usage of DC power management and distribution methods, including DC/DC conversion. DC distribution lacks inherent capability to safely and effectively break fault current, particularly in mobile solutions, where larger and slower electromechanical switching devices are not optimal or feasible. One solution is to design a low-energy breaking point into a switching power supply. Simpler converter designs, with a lower number of switching devices, have been modeled and can be functionally utilized for this purpose. However, these designs cannot easily or efficiently provide isolation between the source and the load. A full-bridge DC/DC converter can accomplish this task with galvanic isolation through a transformer. The full-bridge DC/DC converter is fairly complex to analyze with state-space analysis and does not have an existing averaged model. This thesis focuses on developing averaged and small-signal models for the full-bridge DC/DC converter; validating the small-signal averaged models by simulation in SABER circuit simulation software; and using the validated models to design a full-bridge DC/DC converter for simulation in SABER. The converter power stage is designed along with a Type II controller, a comparative current limit, non-Zero-Voltage-Switching gate drives, and a synchronous rectifier. The designed converter is evaluated for closed-loop stability against step changes in input voltage, load current, and reference voltage. The results are provided to show sufficient response of the full-bridge DC/DC converter, given the design parameters. The proposed architecture accommodates future work to reduce DC fault let-through energy

Author: Marian K. Kazimierczuk
Publisher: John Wiley & Sons
ISBN: 1119525659
Category : Technology & Engineering
Languages : en
Pages : 340

View

Book Description
AVERAGE CURRENT-MODE CONTROL OF DC-DC POWER CONVERTERS An authoritative one-stop guide to the analysis, design, development, and control of a variety of power converter systems Average Current-Mode Control of DC-DC Power Converters provides comprehensive and up-to-date information about average current-mode control (ACMC) of pulse-width modulated (PWM) dc-dc converters. This invaluable one-stop resource covers both fundamental and state-of-the-art techniques in average current-mode control of power electronic converters???featuring novel small-signal models of non-isolated and isolated converter topologies with joint and disjoint switching elements and coverage of frequency and time domain analysis of controlled circuits. The authors employ a systematic theoretical framework supported by step-by-step derivations, design procedures for measuring transfer functions, challenging end-of-chapter problems, easy-to-follow diagrams and illustrations, numerous examples for different power supply specifications, and practical tips for developing power-stage small-signal models using circuit-averaging techniques. The text addresses all essential aspects of modeling, design, analysis, and simulation of average current-mode control of power converter topologies, such as buck, boost, buck-boost, and flyback converters in operating continuous-conduction mode (CCM). Bridging the gap between fundamental modeling methods and their application in a variety of switched-mode power supplies, this book: Discusses the development of small-signal models and transfer functions related to the inner current and outer voltage loops Analyzes inner current loops with average current-mode control and describes their dynamic characteristics Presents dynamic properties of the poles and zeros, time-domain responses of the control circuits, and comparison of relevant modeling techniques Contains a detailed chapter on the analysis and design of control circuits in time-domain and frequency-domain Provides techniques required to produce professional MATLAB plots and schematics for circuit simulations, including example MATLAB codes for the complete design of PWM buck, boost, buck-boost, and flyback DC-DC converters Includes appendices with design equations for steady-state operation in CCM for power converters, parameters of commonly used power MOSFETs and diodes, SPICE models of selected MOSFETs and diodes, simulation tools including introductions to SPICE, MATLAB, and SABER, and MATLAB codes for transfer functions and transient responses Average Current-Mode Control of DC-DC Power Converters is a must-have reference and guide for researchers, advanced graduate students, and instructors in the area of power electronics, and for practicing engineers and scientists specializing in advanced circuit modeling methods for various converters at different operating conditions.

Author: Andre Kislovski
Publisher: Springer Science & Business Media
ISBN: 9401178496
Category : Science
Languages : en
Pages : 409

View

Book Description
The most critical part of the modern switching-mode power supply is the regulated dc/dc converter. Its dynamic behavior directly determines or influences four of the important characteristics of the power supply: • Stability of the feedback loop • Rejection of input-voltage ripple and the closely-related transient re sponse to input-voltage perturbation • Output impedance and the closely-related transient response to load perturbation • Compatibility with the input EMI filter Due to the complexity of the operation of the converter, predicting its dynamic behavior has not been easy. Without accurate prediction, and depending only on building the circuit and tinkering with it until the operation is satisfactory, the engineering cost can easily escalate and schedules can be missed. The situation is not much better when the circuit is built in the computer, using a general-purpose circuit-simulation program such as SPICE. (At the end of this book is a form for obtaining information on a computer program especially well suited for dynamic analysis of switching-mode power converters: DYANA, an acronym for "DYnamic ANAlysis. " DYANA is based on the method given in this book. ) The main goal of this book is to help the power-supply designer in the prediction of the dynamic behavior by providing user-friendly analytical tools, concrete results of already-made analyses, tabulated for easy application by the reader, and examples of how to apply the tools provided in the book.

Author: Dalvir K. Saini
Publisher:
ISBN:
Category : DC-to-DC converters
Languages : en
Pages : 285

View

Book Description
Energy efficient, wide-bandwidth, and well-regulated dc-dc power converters are in great demand in today's emerging technologies in areas such as medical, communication, aerospace, and automotive industries. In addition to design and selection of the converter components, a robust closed-loop modeling is very essential for reliable power-electronic systems.Two closed-loop control techniques for power converters exist: voltage-mode control and current-mode control. The principles of voltage-mode control have been explored in great depths by researchers over the last two decades. However, the dynamic modeling of current-mode controlled dc-dc power converters has many uncharted areas that needs careful attention. Two main methods exist under the category of current-mode control: peak current-mode control and average current-mode control. Both of these control strategies are very attractive in applications that require fast control speeds, improved voltage regulation, and improved power supply noise rejection ratio. In recent technological advancements, where high noise immunity and tight regulation are desired, the average current-mode control has proven to be a superior choice, when compared to other control techniques for power converters. In this dissertation, a complete systematic theoretical framework for analysis, design, characterization, and measurements of the dc-dc converters with average current-mode control is introduced. To overcome the drawbacks of the traditional average current-mode control method, a new, true-averaged current-mode control technique is proposed. The new technique is implemented on the basic converter topologies namely, buck, boost, and buck-boost. The dynamic small-signal models of the converter power-stages are developed using the circuit-averaging technique. Theinner-current loop of the power converters is designed and their frequency-domain, time-domain, and pole-zero domain characteristics are exploited. Subsequently, the outer-voltage loop is designed in the presence of current-controlled power stage and the overall converter performance is evaluated against dynamically-varying operating conditions.A laboratory prototype of a buck-boost converter for 12 V to 5 V at 25 W operating at 200 kHz was designed, built, and measured. The theoretically predicted results were validated both through simulations and experiments. The techniques to measure the small-signal open-loop and closed-loop transfer functions are also provided. Excellent agreement between the theoretical and experimental results were observed.

Author: Keng C. Wu
Publisher: Elsevier
ISBN: 0080459560
Category : Technology & Engineering
Languages : en
Pages : 409

View

Book Description
Switch-Mode Power Converters introduces an innovative, highly analytical approach to symbolic, closed-form solutions for switched-mode power converter circuits. This is a highly relevant topic to power electronics students and professionals who are involved in the design and analysis of electrical power converters. The author uses extensive equations to explain how solid-state switches convert electrical voltages from one level to another, so that electronic devices (e.g., audio speakers, CD players, DVD players, etc.) can use different voltages more effectively to perform their various functions. Most existing comparable books published as recently as 2002 do not discuss closed-loop operations, nor do they provide either DC closed-loop regulation equations or AC loop gain (stability) formulae. The author Wu, a leading engineer at Lockheed Martin, fills this gap and provides among the first descriptions of how error amplifiers are designed in conjunction with closed-loop bandwidth selection. BENEFIT TO THE READER: Readers will gain a mathematically rigorous introduction to numerous, closed-form solutions that are readily applicable to the design and development of various switch-mode power converters. Provides symbolic, closed-form solutions for DC and AC studies Provides techniques for expressing close-loop operation Gives readers the ability to perform closed-loop regulation and sensitivity studies Gives readers the ability to design error amplifiers with precision Employs the concept of the continuity of states in matrix form Gives accelerated time-domain, steady-state studies using Laplace transform Gives accelerated time-domain studies using state transition Extensive use of matrix, linear algebra, implicit functions, and Jacobian determinants Enables the determination of power stage gain that otherwise could not be obtained

Author: Marian K. Kazimierczuk
Publisher: John Wiley & Sons
ISBN: 1119009561
Category : Technology & Engineering
Languages : en
Pages : 960

View

Book Description
PWM DC-DC power converter technology underpins many energy conversion systems including renewable energy circuits, active power factor correctors, battery chargers, portable devices and LED drivers. Following the success of Pulse-Width Modulated DC-DC Power Converters this second edition has been thoroughly revised and expanded to cover the latest challenges and advances in the field. Key features of 2nd edition: Four new chapters, detailing the latest advances in power conversion, focus on: small-signal model and dynamic characteristics of the buck converter in continuous conduction mode; voltage-mode control of buck converter; small-signal model and characteristics of the boost converter in the discontinuous conduction mode and electromagnetic compatibility EMC. Provides readers with a solid understanding of the principles of operation, synthesis, analysis and design of PWM power converters and semiconductor power devices, including wide band-gap power devices (SiC and GaN). Fully revised Solutions for all end-of-chapter problems available to instructors via the book companion website. Step-by-step derivation of closed-form design equations with illustrations. Fully revised figures based on real data. With improved end-of-chapter summaries of key concepts, review questions, problems and answers, biographies and case studies, this is an essential textbook for graduate and senior undergraduate students in electrical engineering. Its superior readability and clarity of explanations also makes it a key reference for practicing engineers and research scientists.

Author: Arthur G. Birchenough
Publisher:
ISBN:
Category : DC-to-DC converters
Languages : en
Pages : 28

View

Book Description
The design and performance of an experimental dc-dc converter are described. The converter was rated for a power output of 1 kW, with a 150-percent overload rating, and it produced a 200-V, +1-percent, dc output from an input of 56 V, +10 and -20 percent. Voltage regulation is accomplished by varying the duty cycle of the internal 7-kHz quasi-square-wave carrier. Integrated circuits in the control section, a proportional current drive system, and powdered metal cores (Ni-17Fe-2Mo) for the power transformer were some of the design features. The measured efficiency peaked at 92 percent and was 88 percent at 1 kW. The total component weight was 6 lb (2.7 kg).

Author: Ivo Barbi
Publisher: Springer
ISBN: 3319961780
Category : Technology & Engineering
Languages : en
Pages : 325

View

Book Description
This book describes the operation and analysis of soft-commutated isolated DC–DC converters used in the design of high efficiency and high power density equipment. It explains the basic principles behind first- and second-order circuits with power switches to enable readers to understand the importance of these converters in high efficiency and high power density power supply design for residential, commercial, industrial and medical use as well as in aerospace equipment. With each chapter featuring a different power converter topology, the book covers the most important resonant converters, including series resonant converters; resonant LLC converters; soft commutation pulse width modulation converters; zero voltage switching; and zero current switching. Each topic is presented with full analysis, a showcase of the power stages of the converters, exercises and their solutions as well as simulation results, which mainly focus on the commutation analysis and output characteristic. This book is a valuable source of information for professionals working in power electronics, power conversion and design of high efficiency and high power density DC–DC converters and switch mode power supplies. The book also serves as a point of reference for engineers responsible for development projects and equipment in companies and research centers and a text for advanced students.

Author: Marian K. Kazimierczuk
Publisher: John Wiley & Sons
ISBN: 1119053757
Category : Technology & Engineering
Languages : en
Pages : 278

View

Book Description
Designed to complement a range of power electronics study resources, this unique lab manual helps students to gain a deep understanding of the operation, modeling, analysis, design, and performance of pulse-width modulated (PWM) DC-DC power converters. Exercises focus on three essential areas of power electronics: open-loop power stages; small-signal modeling, design of feedback loops and PWM DC-DC converter control schemes; and semiconductor devices such as silicon, silicon carbide and gallium nitride. Meeting the standards required by industrial employers, the lab manual combines programming language with a simulation tool designed for proficiency in the theoretical and practical concepts. Students and instructors can choose from an extensive list of topics involving simulations on MATLAB, SABER, or SPICE-based platforms, enabling readers to gain the most out of the prelab, inlab, and postlab activities. The laboratory exercises have been taught and continuously improved for over 25 years by Marian K. Kazimierczuk thanks to constructive student feedback and valuable suggestions on possible workroom improvements. This up-to-date and informative teaching material is now available for the benefit of a wide audience. Key features: Includes complete designs to give students a quick overview of the converters, their characteristics, and fundamental analysis of operation. Compatible with any programming tool (MATLAB, Mathematica, or Maple) and any circuit simulation tool (PSpice, LTSpice, Synopsys SABER, PLECS, etc.). Quick design section enables students and instructors to verify their design methodology for instant simulations. Presents lab exercises based on the most recent advancements in power electronics, including multiple-output power converters, modeling, current- and voltage-mode control schemes, and power semiconductor devices. Provides comprehensive appendices to aid basic understanding of the fundamental circuits, programming and simulation tools. Contains a quick component selection list of power MOSFETs and diodes together with their ratings, important specifications and Spice models.

Author: Teuvo Suntio
Publisher: John Wiley & Sons
ISBN: 3527407081
Category : Technology & Engineering
Languages : en
Pages : 371

View

Book Description
This book collates the information available on this topic, hitherto only to be found in journals and at conferences. It presents the fundamentals and advances in average and small-signal modeling of switched-mode converters, before applying this information to generate a real canonical converter model. Practical examples are scattered throughout the text, and experimental evidence is cited to support theoretical findings. The result is a solid basis for understanding and utilizing the dynamics of switched-mode converters -- for the first time in their 40-year history.