Author: Marco A. FríasPublisher:
ISBN:
Category :
Languages : en
Pages : 150
Book Description
Cause of Cracking in High Performance Concrete Bridge Decks
Author: Marco A. FríasTransverse Cracking of High Performance Concrete Bridge Decks After One Season Or Six to Eight Months
Author: Publisher:
ISBN:
Category : Concrete
Languages : en
Pages : 112
Book Description
Cracking is a major problem with newly placed concrete decks. These decks tend to develop full depth, transverse cracks and partial depth longitudinal cracks within a few months of the concrete being placed. A literature review showed that several other states had experienced similar problems. A review of data from Ohio bridge decks showed weak correlations between deck cracking and slump, time of year when the deck was placed, shrinkage, chloride permeability and compressive strength, but there was no clear relationship between cracking and any of these properties. Data also suggested that using a coarse aggregate with an absorption> 1% may help mitigate deck cracking but will not always stop it. As part of this study, 3 bridge decks were instrumented. One was a standard class "S" concrete deck and the other two were high performance concrete. The class "S" deck showed only hairline cracking after 1 year, but transverse cracking occurred in the HPC decks. Instruments were placed in the decks to monitor strains. From the data, it appears that cracking is caused by several factors. High heat of hydration caused the plastic concrete to expand. When the concrete sets and cools, tensile stressed develop. Further tensile stresses develop through drying shrinkage. Restraining the deck against normal thermal movement contributes to additional tensile stress. Autogeneous shrinkage, where high heats of hydration cause water evaporation during hydration, and plastic shrinkage may cause more tensile stress. Recommendations for mitigating cracking include using lower cement contents, adding pozzolans and retarders, using slightly higher water/cement ratios, using larger aggregates, taking steps to limit shrinkage and eliminating restraints.
Transverse Cracking of High Performance Concrete Bridge Decks
Author: Prakash GaneshPublisher:
ISBN:
Category :
Languages : en
Pages : 125
Book Description
Cracking is a major problem with newly placed concrete decks. These decks tend to develop full depth, transverse cracks and partial depth longitudinal cracks within a few months of the concrete being placed. A literature review showed that several other states had experienced similar problems. A review of data from Ohio bridge decks showed weak correlations between deck cracking and slump, time of year when the deck was placed, shrinkage, chloride permeability and compressive strength, but there was no clear relationship between cracking and any of these properties. Data also suggested that using a coarse aggregate with an absorption> 1% may help mitigate deck cracking but will not always stop it. As part of this study, three bridge decks were instrumented. One was a standard class S concrete deck and the other two were high performance concrete. The class S deck showed only hairline cracking after 1 year, but transverse cracking occurred in the HPC decks. Instruments were placed in the decks to monitor strains. From the data, it appears that cracking is caused by several factors. High heat of hydration caused the plastic concrete to expand. When the concrete sets and cools, tensile stresses develop. Additional tensile stresses develop through drying shrinkage. Restraining the deck against normal thermal movement contributes to additional tensile stress. Autogeneous shrinkage, where high heats of hydration cause water evaporation during hydration, and plastic shrinkage may cause more tensile stress. Recommendations for mitigating cracking include using lower cement contents, adding pozzolans and retarders, using slightly higher water/cement ratios, using larger aggregates, taking steps to limit shrinkage and eliminating restraints.
High-Performance Concrete Bridge Decks: A Fast-Track Implementation Study, Volume 1: Structural Behavior
Author: Robert J. FroschPublisher: Purdue University Press
ISBN: 9781622601080
Category : Transportation
Languages : en
Pages : 178
Book Description
Transverse cracking of concrete bridge decks is problematic in numerous states. Cracking has been identified in the negative and positive moment regions of bridges and can appear shortly after opening the structure to live loads. To improve the service life of the bridge deck as well as decrease maintenance costs, changes to current construction practices in Indiana are being considered. A typical bridge deck was instrumented which incorporated the following: increased reinforcement amounts, decreasing reinforcement spacing, and high-performance, low-shrinkage concrete. The low shrinkage concrete was achieved using a ternary concrete mix. The objective of this research was to determine the performance, particularly in terms of transverse cracking and shrinkage, of a bridge incorporating design details meant to reduce cracking. Based on measurements from the bridge, it was determined that maximum tensile strains experienced in the concrete were not sufficient to initiate cracking. An on-site inspection was performed to confirm that cracking had not initiated. The data was analyzed and compared with the behavior of a similarly constructed bridge built with nearly identical reinforcing details, but with a more conventional concrete to evaluate the effect of the HPC. Based on this study, it was observed that full-depth transverse cracks did not occur in the structure and that the use of HPC lowered the magnitude of restrained shrinkage strains and resulting tensile stresses.
Investigation of Cracking in High Performance Concrete Used in New York State Bridge Decks
Author: Mohammad Hadi Kazemi KamyabPublisher:
ISBN:
Category :
Languages : en
Pages : 204
Book Description
Phase I: Minimization of Cracking in New Concrete Bridge Decks
Author: Nicole DuffalaPublisher:
ISBN:
Category : Concrete bridges
Languages : en
Pages : 85
Book Description
Cracking of newly constructed high-performance concrete (HPC) bridges is a problem recognized nationwide and the Nevada Department of Transportation has been plagued with this distress in their HPC concrete bridge decks. This research effort is a strategic attempt to reduce or eliminate random cracking that is caused by restrained shrinkage in new concrete bridge decks constructed in Nevada. The overall objective will be achieved through a three phase research program of which the results of Phase I are being reported in this document. Phase I research findings provide a synthesis of state, regional, and national practices and knowledge on factors contributing to HPC bridge deck cracking. With respect to materials and mixture proportioning, the overwhelming conclusion is that the shrinkage of the concrete mixture, especially at early-ages, must be reduced and the concrete’s resistance to cracking must be Improved. A rigorous, Phase II laboratory experiment was designed and is presented herein. This Phase II laboratory experiment focuses on local materials and will assess the properties of concrete mixtures that are related to early-age drying shrinkage restraint cracking. Ultimately, these research findings could be used to revise standard specifications and special provisions for Nevada DOT bridge decks and eventually reduce the overall incidence of restraint cracking due to concrete drying shrinkage.
Controlling Early-age Transverse Cracking in High Performance Concrete Bridge Decks
Author: Eric Ying Xian LiuCracking Studies of High-performance Concrete for Bridge Decks
Author: Zhiguo GongPublisher:
ISBN:
Category : Concrete bridges
Languages : en
Pages :
Book Description
Assessment of Cracking Potential of High-performance Concrete Due to Restrained Shrinkage
Author: Publisher:
ISBN:
Category : Concrete
Languages : en
Pages : 146
Book Description
Many State Engineers have observed that a number of high-performance concrete (HPC) bridge decks exhibited cracking and sometimes soon after being poured. Although deck cracking can be attributed to various causes, in many cases, concrete shrinkage is considered the main contributor. Additionally, concrete in bridge decks is considered restrained and there is a need to examine the behavior of HPC mixes under those conditions. The AASHTO test (PP 34-06, The Passive or Restrained Ring Test) is employed to measure the cracking potential and restrained shrinkage behavior of various HPC mixes used in bridge deck projects contracted by the New Jersey Department of Transportation (NJDOT). This thesis presents the results of a study which utilized a method for directly measuring the strain development in the concrete ring using Vibrating Wire Strain Gages (VWSG). For each mix, additional tests were performed to determine the corresponding mechanical properties (e.g., elastic modulus, tensile splitting strength, compressive strength, etc.). The effect of total amount of cementitious materials and the potential of cracking for various mixes are also reported. The results of the study are used to correlate strains from restrained shrinkage tests with those from free shrinkage tests. Results show that the coarse aggregate (CA) content, the coarse/fine aggregate ratio, and cementitious content have the greatest effect on both free and restrained shrinkage. Mixes with higher cementitious content were observed to crack earlier. In general, to minimize HPC cracking potential, it is suggested that a limit on free shrinkage (450 micro strain at 56 days) be specified in bridge decks to indirectly reflect restrained shrinkage conditions. Additional limits for the total amount of coarse aggregate (1800 lb/cu yd.) and Coarse/Fine aggregate ratio (1.48) should also be considered.
Field Monitoring of Shrinkage Cracking Potential in a High-performance Bridge Deck
Author: Timothy WalkowichPublisher:
ISBN:
Category : Bridges
Languages : en
Pages : 107
Book Description
Over the past decade many state engineers throughout New Jersey have reported cracking on High Performance Concrete (HPC) bridge decks at early ages. The presence of cracking early in the life of a high performance deck offsets the benefits gained in using the material as the potential for corrosion begins at the onset of cracking. While many factors apply to bridge deck cracking, the shrinkage of the concrete's mass is a primary concern. Because of shear studs and boundary conditions, among other causes that act in restraining the deck itself, it is important to understand the mechanics of concrete under restraint. The AASHTO Passive Ring Test (PP 34-06) is seeing an increase in use in studies analyzing restrained shrinkage. The test simulates a concrete member of infinite length and allows researchers to study the effects of various parameters on restrained shrinkage. This thesis presents the results of a study that analyzed the ring test's ability to simulate restrained shrinkage on HPC bridge decks. The investigation incorporated an instrumented, simply supported composite bridge deck with laboratory samples taken on the day of the pour as well as a finite element analysis. The results suggest the AASHTO Passive Ring Test simulates the restrained shrinkage of simply supported HPC decks reasonably well. Fewer than 1% of all cracking present on the ring specimens saw complete penetration through the sample with 80-90% of all cracking considered to be micro cracking. While the presence of several cracks along the bridge deck itself showed no correlation with the shrinkage ring specimens, finite element analysis suggests these cracks are a result of adjacent live load. Also, the findings of this study highlight the importance of following design in the field as well as the effect of live load on staged construction of HPC bridge decks.