Author: Publisher:
ISBN:
Category :
Languages : en
Pages : 685
Book Description
Catalysis and automotive pollution control II : proceedings of the Second International Symposium (CAPoC 2), Brussels, Belgium, September 10-13, 1990
Author: Catalysis and Automotive Pollution Control II
Author: André CrucqPublisher: Elsevier Publishing Company
ISBN:
Category : Science
Languages : en
Pages : 708
Book Description
This volume constitutes the proceedings of the second symposium on Catalysis and Automotive Pollution Control. CAPoC 2 was a great success from the point of view of its scientific interest, as evidenced by the content of this book, and also from the high participation, some 260 scientists. About two-thirds of the contributors came from the industrial world, mainly the car and oil industries and catalyst manufacturers. This is ample proof that exhaust catalysis remains a major topic of interest. The first part of the book is a general introduction to the problem of automotive pollution. The second, strictly catalytic, part is devoted to fundamental and applied studies on pollution control, with emphasis on exhaust catalytic converters.
Catalysis and Automotive Pollution Control III
Author: A. FrennetPublisher: Elsevier
ISBN: 0080544681
Category : Science
Languages : en
Pages : 959
Book Description
These proceedings are based on the third of a series of symposia devoted to the use of catalysis for the depollution of exhaust gases of motor vehicles. Although catalysts have been used for this purpose for some thirty years, the subject is still very topical because of its economic impact. The increasing number of submitted, accepted and published papers amply attests to this fact.
Catalysis and Automotive Pollution Control II
Author: A. CrucqPublisher: Elsevier
ISBN: 008088749X
Category : Technology & Engineering
Languages : en
Pages : 701
Book Description
This volume constitutes the proceedings of the second symposium on Catalysis and Automotive Pollution Control. CAPoC 2 was a great success from the point of view of its scientific interest, as evidenced by the content of this book, and also from the high participation, some 260 scientists. About two-thirds of the contributors came from the industrial world, mainly the car and oil industries and catalyst manufacturers. This is ample proof that exhaust catalysis remains a major topic of interest. The first part of the book is a general introduction to the problem of automotive pollution. The second, strictly catalytic, part is devoted to fundamental and applied studies on pollution control, with emphasis on exhaust catalytic converters.
Third World Congress on Oxidation Catalysis
Author: S.T. OyamaPublisher: Elsevier
ISBN: 0080544711
Category : Technology & Engineering
Languages : en
Pages : 1277
Book Description
The overall theme of the 3rd World Congress is "Atom Efficient Catalytic Oxidations for Global Technologies". This theme was chosen to stimulate the participants to report their findings with an emphasis on conserving valuable material in their catalytic transformations, as well as conserving energy, in an environmentally responsible manner. Progress towards this stated goal is substantial as evidenced by the tremendous response of the community in their participation of quality publications complied in these Proceedings of the Congress.The subjects presented span a wide range of oxidation reactions and catalysts. These include the currently important area of lower alkane oxidation to the corresponding olefins, unsaturated aldehydes, acids and nitriles.The four featured lectures and seven plenary lectures constitute the general background and overview of the subject matter at hand. The 104 contributed papers and 13 poster manuscripts, summarized in this compendium, probe new avenues to achieve catalytically efficient oxidation reactions for the future needs of mankind in a global environment.
Acid-Base Catalysis II
Author: H. HattoriPublisher: Elsevier
ISBN: 008088752X
Category : Technology & Engineering
Languages : en
Pages : 593
Book Description
Solid acid catalysts are already being used in various processes in petroleum refining and are presently being studied intensively in both academic and applied fields for usage in a variety of reactions. Solid base catalysts are also gaining increasing recognition as potential catalysts. Both acidic and basic catalysts are promising not only with respect to acid and base-catalyzed reactions but also in materials sciences, such as the production of adsorbents, sensors, ceramics, etc.The present volume presents the text of 21 invited oral presentations and 58 poster presentations. The material covers a wide range of aspects on acid-base catalysis, from quantum chemistry to industrialized processes.
Catalysis: An Integrated Approach
Author: B.A. AverillPublisher: Elsevier
ISBN: 0080528643
Category : Technology & Engineering
Languages : en
Pages : 603
Book Description
This book concentrates on industrially relevant reactions which are catalyzed by heterogeneous and homogeneous catalysts. Homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis using metallic and non-metallic solids. In both areas the high degree of sophistication of spectroscopic techniques and theoretical modelling has led to an enormous increase in our understanding at the molecular level. This holds for the kinetics of the reactions and the reactivities of the catalysts, as well as for the syntheses of the catalytic materials. The development of catalysis science since the first edition of this book has necessitated a thorough revision, including special chapters on biocatalysis, catalyst characterization and adsorption methods. The multidisciplinary nature of catalysis is reflected in the choice of a novel combination of basic disciplines which will be refreshing and inspiring to readers.
Catalysis by Metals and Alloys
Author: V. PonecPublisher: Elsevier
ISBN: 0080528651
Category : Science
Languages : en
Pages : 745
Book Description
Catalysis by Metals and Alloys
Experiments in Catalytic Reaction Engineering
Author: J.M. BertyPublisher: Elsevier
ISBN: 0080531423
Category : Technology & Engineering
Languages : en
Pages : 289
Book Description
The science of catalytic reaction engineering studies the catalyst and the catalytic process in the laboratory in order to predict how they will perform in production-scale reactors. Surprises are to be avoided in the scaleup of industrial processes. The laboratory results must account for flow, heat and mass transfer influences on reaction rate to be useful for scaleup. Calculated performance based on these results must also be useful to maximization of profit and safety and minimization of pollution. To this end, information on products as well as byproducts and heat produced must be generated. If a sufficiently large database of knowledge is produced, optimization studies will be possible later if economic conditions change.The field of reaction engineering required new tools. For kinetic and catalyst testing, the most successful of these tools was the internal recycle reactor. Studies in recycle reactors can be made under well-defined conditions of flow and associated transfer processes, and close to commercial operation. The recycle reactor eliminates or minimizes the effect of transfer process, and allows the remaining ones to be known.Features of this book:• Provides insight into a field that is neither well understood nor properly appreciated.• Gives a deeper understanding of reaction engineering practice.• Helps avoid frustration and disappointment in industrial research. This book is short and clear enough to assist all members of the R&D and Engineering team, whether reaction engineers, or specialists in other fields. This is critical in this new age of computation and communication, when team members must each know at least something of their colleagues' fields. Additionally, many scientists in more exploratory or fundamental fields can use recycle reactors to study basic phenomena free of transfer interactions.
Catalyst Deactivation 1997
Author: G.A. FuentesPublisher: Elsevier
ISBN: 008052866X
Category : Technology & Engineering
Languages : en
Pages : 711
Book Description
Catalyst Deactivation 1997 focused on 9 key topical areas: carbon deposition and coke formation, chemicals, environmental catalysis, modeling, petroleum processing, poisoning, syngas conversion, techniques, and thermal degradation. All of these areas were well represented at the meeting; moreover, several review articles were presented that provide perspectives on new research and development thrusts. The proceedings of the meeting are organized with six review and award articles at the front of the volume followed by topical articles a keynote, 5-6 oral, and 2-3 poster papers. A list of authors is provided at the end of the book. It should be emphasized that all of the papers were ranked and reviewed by members of the Scientific Committee.