Author: J. F. MacNeill
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 30
Book Description
Beta Heat Treating of Uranium Using a Rolling Quench Machine
Author: J. F. MacNeill
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 30
Book Description
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 30
Book Description
Effects of Rolling and Heat Treatment on Anisotropic Irradiation Growth of Uranium
Author: J. H. Kittel
Publisher:
ISBN:
Category : Irradiation
Languages : en
Pages : 38
Book Description
An investigation was made to determine the effect of rolling temperature, roll pass design, amount of reduction, and heat treatment before and after rolling on the anisotropic growth rate of uranium under irradiation. The growth rate was found to increase with decreasing rolling temperature and with increasing reduction of area at 300 deg C. The rate of elongation was proportional to the amount of (010) component present or, where shortening occurred, to the amount of (100) component. Oval-edge-oval roll passes resulted in somewhat higher irradiation growth rates than did round roll passes. Recrystallization after rolling effectively reduced the irradiation growth rate of uranium rolled at temperatures of 500 deg C and lower. Irradiation caused length shortening in uranium which was beta quenched after being round-rolled at temperatures of 400 deg C and above, and which was beta quenched after being oval- rolled at temperatures of 300 deg C and above.
Publisher:
ISBN:
Category : Irradiation
Languages : en
Pages : 38
Book Description
An investigation was made to determine the effect of rolling temperature, roll pass design, amount of reduction, and heat treatment before and after rolling on the anisotropic growth rate of uranium under irradiation. The growth rate was found to increase with decreasing rolling temperature and with increasing reduction of area at 300 deg C. The rate of elongation was proportional to the amount of (010) component present or, where shortening occurred, to the amount of (100) component. Oval-edge-oval roll passes resulted in somewhat higher irradiation growth rates than did round roll passes. Recrystallization after rolling effectively reduced the irradiation growth rate of uranium rolled at temperatures of 500 deg C and lower. Irradiation caused length shortening in uranium which was beta quenched after being round-rolled at temperatures of 400 deg C and above, and which was beta quenched after being oval- rolled at temperatures of 300 deg C and above.
AN INVESTIGATION OF THE PROPERTIES OF ROLLED URANIUM RELATED TO THE QUENCH AFTER BETA HEAT TREATING.
Effects of Rolling and Heat Treatment on Anisotropic Irradiation Growth of Uranium. Final Report-Metallurgy Program 6.1.15
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
An investigation was made to determine the effect of rolling temperature, roll pass design, amount of reduction, and heat treatment before and after rolling on the anisotropic growth rate of uranium under irradiation. The growth rate was found to increase with decreasing rolling temperature and with increasing reduction of area at 300 deg C. The rate of elongation was proportional to the amount of (0l0) component present or, where shortening occurred, to the amount of (l00) component. Oval-edgeoval roll passes resulted in somewhat higher irradiation growth rates than did round roll passes. Recrystallization after rolling effectively reduced the irradiation growth rate of uranium rolled at temperatures of 500 deg C and lower. Irradiation caused length shortening in uranium which was beta quenched after being round-rolled at temperatures of 400 deg C and above, and which was beta quenched after being oval- rolled at temperatures of 300 deg C and above. (auth).
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
An investigation was made to determine the effect of rolling temperature, roll pass design, amount of reduction, and heat treatment before and after rolling on the anisotropic growth rate of uranium under irradiation. The growth rate was found to increase with decreasing rolling temperature and with increasing reduction of area at 300 deg C. The rate of elongation was proportional to the amount of (0l0) component present or, where shortening occurred, to the amount of (l00) component. Oval-edgeoval roll passes resulted in somewhat higher irradiation growth rates than did round roll passes. Recrystallization after rolling effectively reduced the irradiation growth rate of uranium rolled at temperatures of 500 deg C and lower. Irradiation caused length shortening in uranium which was beta quenched after being round-rolled at temperatures of 400 deg C and above, and which was beta quenched after being oval- rolled at temperatures of 300 deg C and above. (auth).
A Martensitic Reaction for Uranium
Author: A. L. Bement
Publisher:
ISBN:
Category : Martensitic transformations
Languages : en
Pages : 60
Book Description
Publisher:
ISBN:
Category : Martensitic transformations
Languages : en
Pages : 60
Book Description
Recrystallization of Beta-heat-treated Dingot-uranium Cores
Author: R. R. Guyer
Publisher:
ISBN:
Category : Annealing of metals
Languages : en
Pages : 30
Book Description
Publisher:
ISBN:
Category : Annealing of metals
Languages : en
Pages : 30
Book Description
The Effect of Cooling Rate on the Nucleation and Growth of Beta-uranium Hydride in Metallic Uranium
Author: H. R. Gardner
Publisher:
ISBN:
Category : Beta rays
Languages : en
Pages : 60
Book Description
Publisher:
ISBN:
Category : Beta rays
Languages : en
Pages : 60
Book Description
Summary Report on the Study of Beta Treatment of Uranium
Author: R. B. Russell
Publisher:
ISBN:
Category : Uranium alloys
Languages : en
Pages : 156
Book Description
Publisher:
ISBN:
Category : Uranium alloys
Languages : en
Pages : 156
Book Description
The Fabrication and Testing of Depleted Uranium Blanket Slugs for EBR-II
Author: W. R. Burt
Publisher:
ISBN:
Category : Depleted uranium
Languages : en
Pages : 46
Book Description
Emphasis is placed on evaluation of the beta heat treatment via thermal cycling tests on grain-size uniformity of machined slugs via ultrasonic, through-transmission testing.
Publisher:
ISBN:
Category : Depleted uranium
Languages : en
Pages : 46
Book Description
Emphasis is placed on evaluation of the beta heat treatment via thermal cycling tests on grain-size uniformity of machined slugs via ultrasonic, through-transmission testing.
Rolling of Uranium Sheet and Its Properties
Author: Kyoaki Taketani
Publisher:
ISBN:
Category : Rolling (Metal-work)
Languages : en
Pages : 22
Book Description
Publisher:
ISBN:
Category : Rolling (Metal-work)
Languages : en
Pages : 22
Book Description