Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781721512584
Category :
Languages : en
Pages : 26
Book Description
The photovoltaic (PV) module on the International Space Station (ISS) has been operating since November 2000 and supporting electric power demands of the ISS and its crew of three. The PV module contains photovoltaic arrays that convert solar energy to electrical power and an integrated equipment assembly (IEA) that houses electrical hardware and batteries for electric power regulation and storage. Each PV module contains two independent power channels for fault tolerance. Each power channel contains three batteries in parallel to meet its performance requirements and for fault tolerance. Each battery consists of 76 Ni-Hydrogen (Ni-H2) cells in series. These 76 cells are contained in two orbital replaceable units (ORU) that are connected in series. On-orbit data are monitored and trended to ensure that all hardware is operating normally. Review of on-orbit data showed that while five batteries are operating very well, one is showing signs of mismatched ORUs. The cell pressure in the two ORUs differs by an amount that exceeds the recommended range. The reason for this abnormal behavior may be that the two ORUs have different use history. An assessment was performed and it was determined that capacity of this battery would be limited by the lower pressure ORU. Steps are being taken to reduce this pressure differential before battery capacity drops to the point of affecting its ability to meet performance requirements. As a first step, a battery reinitialization procedure was developed to reduce this pressure differential. The procedure was successfully carried out on-orbit and the pressure differential was reduced to the recommended range. This paper describes the battery performance and the consequences of mismatched ORUs that make a battery. The paper also describes the reinitialization procedure, how it was performed on orbit, and battery performance after the reinitialization. On-orbit data monitoring and trending is an ongoing activity and it will continue as ISS
Battery Reinitialization of the Photovoltaic Module of the International Space Station
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781721512584
Category :
Languages : en
Pages : 26
Book Description
The photovoltaic (PV) module on the International Space Station (ISS) has been operating since November 2000 and supporting electric power demands of the ISS and its crew of three. The PV module contains photovoltaic arrays that convert solar energy to electrical power and an integrated equipment assembly (IEA) that houses electrical hardware and batteries for electric power regulation and storage. Each PV module contains two independent power channels for fault tolerance. Each power channel contains three batteries in parallel to meet its performance requirements and for fault tolerance. Each battery consists of 76 Ni-Hydrogen (Ni-H2) cells in series. These 76 cells are contained in two orbital replaceable units (ORU) that are connected in series. On-orbit data are monitored and trended to ensure that all hardware is operating normally. Review of on-orbit data showed that while five batteries are operating very well, one is showing signs of mismatched ORUs. The cell pressure in the two ORUs differs by an amount that exceeds the recommended range. The reason for this abnormal behavior may be that the two ORUs have different use history. An assessment was performed and it was determined that capacity of this battery would be limited by the lower pressure ORU. Steps are being taken to reduce this pressure differential before battery capacity drops to the point of affecting its ability to meet performance requirements. As a first step, a battery reinitialization procedure was developed to reduce this pressure differential. The procedure was successfully carried out on-orbit and the pressure differential was reduced to the recommended range. This paper describes the battery performance and the consequences of mismatched ORUs that make a battery. The paper also describes the reinitialization procedure, how it was performed on orbit, and battery performance after the reinitialization. On-orbit data monitoring and trending is an ongoing activity and it will continue as ISS
Publisher: Createspace Independent Publishing Platform
ISBN: 9781721512584
Category :
Languages : en
Pages : 26
Book Description
The photovoltaic (PV) module on the International Space Station (ISS) has been operating since November 2000 and supporting electric power demands of the ISS and its crew of three. The PV module contains photovoltaic arrays that convert solar energy to electrical power and an integrated equipment assembly (IEA) that houses electrical hardware and batteries for electric power regulation and storage. Each PV module contains two independent power channels for fault tolerance. Each power channel contains three batteries in parallel to meet its performance requirements and for fault tolerance. Each battery consists of 76 Ni-Hydrogen (Ni-H2) cells in series. These 76 cells are contained in two orbital replaceable units (ORU) that are connected in series. On-orbit data are monitored and trended to ensure that all hardware is operating normally. Review of on-orbit data showed that while five batteries are operating very well, one is showing signs of mismatched ORUs. The cell pressure in the two ORUs differs by an amount that exceeds the recommended range. The reason for this abnormal behavior may be that the two ORUs have different use history. An assessment was performed and it was determined that capacity of this battery would be limited by the lower pressure ORU. Steps are being taken to reduce this pressure differential before battery capacity drops to the point of affecting its ability to meet performance requirements. As a first step, a battery reinitialization procedure was developed to reduce this pressure differential. The procedure was successfully carried out on-orbit and the pressure differential was reduced to the recommended range. This paper describes the battery performance and the consequences of mismatched ORUs that make a battery. The paper also describes the reinitialization procedure, how it was performed on orbit, and battery performance after the reinitialization. On-orbit data monitoring and trending is an ongoing activity and it will continue as ISS
Proceedings of the ... Intersociety Energy Conversion Engineering Conference
Author:
Publisher:
ISBN:
Category : Direct energy conversion
Languages : en
Pages : 844
Book Description
Publisher:
ISBN:
Category : Direct energy conversion
Languages : en
Pages : 844
Book Description
Update on International Space Station Nickel-Hydrogen Battery On-Orbit Performance
Monthly Catalog of United States Government Publications
Author:
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1102
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1102
Book Description
The International Space Station
Author: Robert C. Dempsey
Publisher: Government Printing Office
ISBN: 9780160943898
Category : Transportation
Languages : en
Pages : 440
Book Description
Looks at the operations of the International Space Station from the perspective of the Houston flight control team, under the leadership of NASA's flight directors, who authored the book. The book provides insight into the vast amount of time and energy that these teams devote to the development, planning and integration of a mission before it is executed. The passion and attention to detail of the flight control team members, who are always ready to step up when things do not go well, is a hallmark of NASA human spaceflight operations. With tremendous support from the ISS program office and engineering community, the flight control team has made the International Space Station and the programs before it a success.
Publisher: Government Printing Office
ISBN: 9780160943898
Category : Transportation
Languages : en
Pages : 440
Book Description
Looks at the operations of the International Space Station from the perspective of the Houston flight control team, under the leadership of NASA's flight directors, who authored the book. The book provides insight into the vast amount of time and energy that these teams devote to the development, planning and integration of a mission before it is executed. The passion and attention to detail of the flight control team members, who are always ready to step up when things do not go well, is a hallmark of NASA human spaceflight operations. With tremendous support from the ISS program office and engineering community, the flight control team has made the International Space Station and the programs before it a success.
International Traffic in Arms Regulations (ITAR) (22 CFR 120-130).
Author: United States. Department of State
Publisher:
ISBN:
Category : Arms transfers
Languages : en
Pages : 106
Book Description
Publisher:
ISBN:
Category : Arms transfers
Languages : en
Pages : 106
Book Description
Spacecraft Power Systems
Author: Mukund R. Patel
Publisher: CRC Press
ISBN: 1003804217
Category : Technology & Engineering
Languages : en
Pages : 363
Book Description
This second edition of Spacecraft Power Systems is a comprehensive coverage of the fundamentals, design trades, components, controls, and operations of spacecraft power systems based on the real-world design and operations of spacecraft that have successfully flown for decades. It also includes emerging high-voltage, high-power systems for in-space propulsion for interplanetary travel. With new and updated chapters, sections, and discussions, the second edition covers up-to-date high-voltage, MW-scale electric propulsion, updated PV and battery systems, spacecraft power components, power electronics, and their architectures and operations. This book also presents the latest in spacecraft design processes and trades, controls, operations, and protection. This book is intended for senior undergraduate and graduate students in mechanical, aerospace, and electrical engineering taking courses in Space Systems, Space Engineering, and Spacecraft Power Systems, as well as for practicing aerospace and power engineers and managers who are designing, developing, and operating spacecraft power systems.
Publisher: CRC Press
ISBN: 1003804217
Category : Technology & Engineering
Languages : en
Pages : 363
Book Description
This second edition of Spacecraft Power Systems is a comprehensive coverage of the fundamentals, design trades, components, controls, and operations of spacecraft power systems based on the real-world design and operations of spacecraft that have successfully flown for decades. It also includes emerging high-voltage, high-power systems for in-space propulsion for interplanetary travel. With new and updated chapters, sections, and discussions, the second edition covers up-to-date high-voltage, MW-scale electric propulsion, updated PV and battery systems, spacecraft power components, power electronics, and their architectures and operations. This book also presents the latest in spacecraft design processes and trades, controls, operations, and protection. This book is intended for senior undergraduate and graduate students in mechanical, aerospace, and electrical engineering taking courses in Space Systems, Space Engineering, and Spacecraft Power Systems, as well as for practicing aerospace and power engineers and managers who are designing, developing, and operating spacecraft power systems.
Tenth E.C. Photovoltaic Solar Energy Conference
Author: A. Luque
Publisher: Springer
ISBN: 940113622X
Category : Technology & Engineering
Languages : en
Pages : 1437
Book Description
I have great pleasure in presenting the Proceedings of the 10th European Photovoltaic Solar Energy Conference held in Lisbon from 8 to 12 April 1991. These Proceedings contain all the scientific papers delivered at the Conference. The following is a short summary of the Conference activities. The Conference was opened by the Minister of Industry and Energy of Portugal, Eng. Luis Mira do Amaral. At the opening ceremony the Becquerel Prize, created by the Commission of the European Communities, was awarded to Professor Werner Bloss of the University of Stuttgart, and presented by Professor Philippe Bourdeau, Director at the Directorate-General for Science, Research and Development. The Becquerellecture delivered by Professor Bloss constituted the scientific opening to the conference. About 760 delegates from 53 countries presented around 350 contributions, 50 of them as plenary lectures; the contributions were selected among the many papers submitted, this time more strictly than ever before. Also a selected group of scientists were invited to deliver 15 review lectures, to provide an adequate context to the contributions to the Conference. A Symposium on Photovoltaics in Developing Countries, which was very well attended, took place as a parallel event. The Symposium provided an opportunity to hear not only experts of the industrialized countries, but also speakers from the countries where photovoltaics provides services of paramount value.
Publisher: Springer
ISBN: 940113622X
Category : Technology & Engineering
Languages : en
Pages : 1437
Book Description
I have great pleasure in presenting the Proceedings of the 10th European Photovoltaic Solar Energy Conference held in Lisbon from 8 to 12 April 1991. These Proceedings contain all the scientific papers delivered at the Conference. The following is a short summary of the Conference activities. The Conference was opened by the Minister of Industry and Energy of Portugal, Eng. Luis Mira do Amaral. At the opening ceremony the Becquerel Prize, created by the Commission of the European Communities, was awarded to Professor Werner Bloss of the University of Stuttgart, and presented by Professor Philippe Bourdeau, Director at the Directorate-General for Science, Research and Development. The Becquerellecture delivered by Professor Bloss constituted the scientific opening to the conference. About 760 delegates from 53 countries presented around 350 contributions, 50 of them as plenary lectures; the contributions were selected among the many papers submitted, this time more strictly than ever before. Also a selected group of scientists were invited to deliver 15 review lectures, to provide an adequate context to the contributions to the Conference. A Symposium on Photovoltaics in Developing Countries, which was very well attended, took place as a parallel event. The Symposium provided an opportunity to hear not only experts of the industrialized countries, but also speakers from the countries where photovoltaics provides services of paramount value.
Battery Management Systems
Author: H.J. Bergveld
Publisher: Springer Science & Business Media
ISBN: 9401708436
Category : Science
Languages : en
Pages : 311
Book Description
Battery Management Systems - Design by Modelling describes the design of Battery Management Systems (BMS) with the aid of simulation methods. The basic tasks of BMS are to ensure optimum use of the energy stored in the battery (pack) that powers a portable device and to prevent damage inflicted on the battery (pack). This becomes increasingly important due to the larger power consumption associated with added features to portable devices on the one hand and the demand for longer run times on the other hand. In addition to explaining the general principles of BMS tasks such as charging algorithms and State-of-Charge (SoC) indication methods, the book also covers real-life examples of BMS functionality of practical portable devices such as shavers and cellular phones. Simulations offer the advantage over measurements that less time is needed to gain knowledge of a battery's behaviour in interaction with other parts in a portable device under a wide variety of conditions. This knowledge can be used to improve the design of a BMS, even before a prototype of the portable device has been built. The battery is the central part of a BMS and good simulation models that can be used to improve the BMS design were previously unavailable. Therefore, a large part of the book is devoted to the construction of simulation models for rechargeable batteries. With the aid of several illustrations it is shown that design improvements can indeed be realized with the presented battery models. Examples include an improved charging algorithm that was elaborated in simulations and verified in practice and a new SoC indication system that was developed showing promising results. The contents of Battery Management Systems - Design by Modelling is based on years of research performed at the Philips Research Laboratories. The combination of basic and detailed descriptions of battery behaviour both in chemical and electrical terms makes this book truly multidisciplinary. It can therefore be read both by people with an (electro)chemical and an electrical engineering background.
Publisher: Springer Science & Business Media
ISBN: 9401708436
Category : Science
Languages : en
Pages : 311
Book Description
Battery Management Systems - Design by Modelling describes the design of Battery Management Systems (BMS) with the aid of simulation methods. The basic tasks of BMS are to ensure optimum use of the energy stored in the battery (pack) that powers a portable device and to prevent damage inflicted on the battery (pack). This becomes increasingly important due to the larger power consumption associated with added features to portable devices on the one hand and the demand for longer run times on the other hand. In addition to explaining the general principles of BMS tasks such as charging algorithms and State-of-Charge (SoC) indication methods, the book also covers real-life examples of BMS functionality of practical portable devices such as shavers and cellular phones. Simulations offer the advantage over measurements that less time is needed to gain knowledge of a battery's behaviour in interaction with other parts in a portable device under a wide variety of conditions. This knowledge can be used to improve the design of a BMS, even before a prototype of the portable device has been built. The battery is the central part of a BMS and good simulation models that can be used to improve the BMS design were previously unavailable. Therefore, a large part of the book is devoted to the construction of simulation models for rechargeable batteries. With the aid of several illustrations it is shown that design improvements can indeed be realized with the presented battery models. Examples include an improved charging algorithm that was elaborated in simulations and verified in practice and a new SoC indication system that was developed showing promising results. The contents of Battery Management Systems - Design by Modelling is based on years of research performed at the Philips Research Laboratories. The combination of basic and detailed descriptions of battery behaviour both in chemical and electrical terms makes this book truly multidisciplinary. It can therefore be read both by people with an (electro)chemical and an electrical engineering background.
Fundamentals of Photovoltaic Modules and Their Applications
Author: G. N. Tiwari
Publisher: Royal Society of Chemistry
ISBN: 1849730202
Category : Science
Languages : en
Pages : 423
Book Description
Presently there is no single publication available which covers the topics related to photovoltaic (PV) or photovoltaic thermal (PV/T) technologies, thermal modelling, CO2 mitigation and carbon trading. This book disseminates the current knowledge in the fundamentals of solar energy, photovoltaic (PV) or photovoltaic thermal (PV/T) technologies, energy security and climate change and is aimed at undergraduate and postgraduate students and professionals. The main emphasis of the book is on the design, construction, performance and application of PV and PV/T from the electricity and thermal standpoint. Hot topics covered in the book include: energy security of a nation, climate change, CO2 mitigation and carbon credit earned by using PV or PV/T technologies (Carbon Trading). This information will prove helpful in filling the gap between the researchers and professionals working on the application of photovoltaic and global climate change. It also covers economic, cost effective and sustainable aspects of photovoltaic technologies. The book gives a detailed history of the new technological developments in PV/T systems worldwide with system photographs and references and elaborates on the fundamentals of hybrid systems and their performances with thermal modelling. Energy and exergy analysis, techno-economic analysis and carbon trading are key chapters for research professionals. The book also includes important case studies to aid understanding of the subject for all readers.
Publisher: Royal Society of Chemistry
ISBN: 1849730202
Category : Science
Languages : en
Pages : 423
Book Description
Presently there is no single publication available which covers the topics related to photovoltaic (PV) or photovoltaic thermal (PV/T) technologies, thermal modelling, CO2 mitigation and carbon trading. This book disseminates the current knowledge in the fundamentals of solar energy, photovoltaic (PV) or photovoltaic thermal (PV/T) technologies, energy security and climate change and is aimed at undergraduate and postgraduate students and professionals. The main emphasis of the book is on the design, construction, performance and application of PV and PV/T from the electricity and thermal standpoint. Hot topics covered in the book include: energy security of a nation, climate change, CO2 mitigation and carbon credit earned by using PV or PV/T technologies (Carbon Trading). This information will prove helpful in filling the gap between the researchers and professionals working on the application of photovoltaic and global climate change. It also covers economic, cost effective and sustainable aspects of photovoltaic technologies. The book gives a detailed history of the new technological developments in PV/T systems worldwide with system photographs and references and elaborates on the fundamentals of hybrid systems and their performances with thermal modelling. Energy and exergy analysis, techno-economic analysis and carbon trading are key chapters for research professionals. The book also includes important case studies to aid understanding of the subject for all readers.