Author: R. K. Singh
Publisher:
ISBN:
Category :
Languages : en
Pages : 5
Book Description
The research plan was divided into three tasks: (a) growth of oxide heterostructures for interface engineering using standard thin film deposition techniques, (b) atomic level characterization of oxide heterostructure using such techniques as STEM-2 combined with AFM/STM and conventional high-resolution microscopy (HRTEM), and (c) property measurements of aspects important to oxide heterostructures using standard characterization methods, including dielectric properties and dynamic cathodoluminescence measurements. Each of these topics were further classified on the basis of type of oxide heterostructure. Type I oxide heterostructures consisted of active dielectric layers, including the materials Ba{sub x}Sr{sub 1-x}TiO{sub 3} (BST), Y{sub 2}O{sub 3} and ZrO{sub 2}. Type II heterostructures consisted of ferroelectric active layers such as lanthanum manganate and Type III heterostructures consist of phosphor oxide active layers such as Eu-doped Y{sub 2}O{sub 3}.
Atomic Scale Chemical and Structural Characterization of Ceramic Oxide Heterostructure Interfaces
Atomic-scale Studies of the Structure and Chemistry of Ceramic/metal Heterophase Interfaces
Author: Dmitriy Alexandrovich Shashkov
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Scanning transmission electron microscopy was used to determine the atomic structure and chemistry of the ceramic/metal interfaces. Electron energy loss and energy-dispersive X-ray spectroscopies were used to determine the chemistry and nature of bonding at the interfaces. Atom-probe microscopy was used to measure quantitatively the chemical composition of the interfaces.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Scanning transmission electron microscopy was used to determine the atomic structure and chemistry of the ceramic/metal interfaces. Electron energy loss and energy-dispersive X-ray spectroscopies were used to determine the chemistry and nature of bonding at the interfaces. Atom-probe microscopy was used to measure quantitatively the chemical composition of the interfaces.
Atomic-Scale Control and Characterization of Oxide Heterostructures: Correlating Interfacial Structure and Novel Functionalities
Structure-Property Relationships of Oxide Surfaces and Interfaces:
Author: C. Barry Carter
Publisher: Cambridge University Press
ISBN: 9781107412309
Category : Technology & Engineering
Languages : en
Pages : 344
Book Description
Computer modeling has reached a new level of sophistication, where it can be used to predict the structure and energy of interfaces in oxides. Nowhere is this activity more important than in these ceramic materials, where more applications are being discovered but the fundamental properties are often poorly known or not known at all. As more multicomponent oxides are exploited for their novel properties, both the experimentalist and the modeler will be challenged to predict or explain the behavior of these materials under a wide range of conditions. This book focuses on the interfaces of oxide-based materials. The areas of composite materials, materials synthesis, microscopy, defect chemistry and structure, nanomaterials technologies, thin-film synthesis and characterization, computer modeling, structural characterization and properties measurement of surfaces and internal interfaces are featured together with advances in computer modeling of oxide interfaces. A series on structural characterization of surfaces and interfaces utilizing advanced microscopic techniques is also provided, as is a series on the measurement of properties of real interfaces (diffusion, mechanical, electrical and magnetic).
Publisher: Cambridge University Press
ISBN: 9781107412309
Category : Technology & Engineering
Languages : en
Pages : 344
Book Description
Computer modeling has reached a new level of sophistication, where it can be used to predict the structure and energy of interfaces in oxides. Nowhere is this activity more important than in these ceramic materials, where more applications are being discovered but the fundamental properties are often poorly known or not known at all. As more multicomponent oxides are exploited for their novel properties, both the experimentalist and the modeler will be challenged to predict or explain the behavior of these materials under a wide range of conditions. This book focuses on the interfaces of oxide-based materials. The areas of composite materials, materials synthesis, microscopy, defect chemistry and structure, nanomaterials technologies, thin-film synthesis and characterization, computer modeling, structural characterization and properties measurement of surfaces and internal interfaces are featured together with advances in computer modeling of oxide interfaces. A series on structural characterization of surfaces and interfaces utilizing advanced microscopic techniques is also provided, as is a series on the measurement of properties of real interfaces (diffusion, mechanical, electrical and magnetic).
Structure-Property Relationships of Oxide Surfaces and Interfaces:
Author: C. Barry Carter
Publisher: Cambridge University Press
ISBN: 9781558995642
Category : Technology & Engineering
Languages : en
Pages : 326
Book Description
Computer modeling has reached a new level of sophistication, where it can be used to predict the structure and energy of interfaces in oxides. Nowhere is this activity more important than in these ceramic materials, where more applications are being discovered but the fundamental properties are often poorly known or not known at all. As more multicomponent oxides are exploited for their novel properties, both the experimentalist and the modeler will be challenged to predict or explain the behavior of these materials under a wide range of conditions. This book focuses on the interfaces of oxide-based materials. The areas of composite materials, materials synthesis, microscopy, defect chemistry and structure, nanomaterials technologies, thin-film synthesis and characterization, computer modeling, structural characterization and properties measurement of surfaces and internal interfaces are featured together with advances in computer modeling of oxide interfaces. A series on structural characterization of surfaces and interfaces utilizing advanced microscopic techniques is also provided, as is a series on the measurement of properties of real interfaces (diffusion, mechanical, electrical and magnetic).
Publisher: Cambridge University Press
ISBN: 9781558995642
Category : Technology & Engineering
Languages : en
Pages : 326
Book Description
Computer modeling has reached a new level of sophistication, where it can be used to predict the structure and energy of interfaces in oxides. Nowhere is this activity more important than in these ceramic materials, where more applications are being discovered but the fundamental properties are often poorly known or not known at all. As more multicomponent oxides are exploited for their novel properties, both the experimentalist and the modeler will be challenged to predict or explain the behavior of these materials under a wide range of conditions. This book focuses on the interfaces of oxide-based materials. The areas of composite materials, materials synthesis, microscopy, defect chemistry and structure, nanomaterials technologies, thin-film synthesis and characterization, computer modeling, structural characterization and properties measurement of surfaces and internal interfaces are featured together with advances in computer modeling of oxide interfaces. A series on structural characterization of surfaces and interfaces utilizing advanced microscopic techniques is also provided, as is a series on the measurement of properties of real interfaces (diffusion, mechanical, electrical and magnetic).
Interfaces in Heterogeneous Ceramic Systems
Author: L. P. Cook
Publisher: Wiley-American Ceramic Society
ISBN:
Category : Science
Languages : en
Pages : 204
Book Description
This book provides a state-of-the-art collection of recent papers on interfaces in heterogeneous ceramic systems presented at the 6th Pacific Rim Conference on Ceramic and Glass Technology (PacRim 6) in September of 2005 in Maui, Hawaii. The book is logically divided into 5 sections on interfaces, including theory and modeling, wetting phenomena, heterogeneous interfaces in high-temperature superconductors, bio-interfaces, and new developments in instrumentation that aid in the characterization of interfaces.
Publisher: Wiley-American Ceramic Society
ISBN:
Category : Science
Languages : en
Pages : 204
Book Description
This book provides a state-of-the-art collection of recent papers on interfaces in heterogeneous ceramic systems presented at the 6th Pacific Rim Conference on Ceramic and Glass Technology (PacRim 6) in September of 2005 in Maui, Hawaii. The book is logically divided into 5 sections on interfaces, including theory and modeling, wetting phenomena, heterogeneous interfaces in high-temperature superconductors, bio-interfaces, and new developments in instrumentation that aid in the characterization of interfaces.