Author: Publisher:
ISBN:
Category :
Languages : en
Pages : 26
Book Description
Analysis of the Effect of Surface Modification on Polyimide Composites Coated With Erosion Resistant Materials
Author: Analysis of the Effect of Surface Modification on Polyimide Composites Coated with Erosion Resistant Materials
Author: National Aeronautics and Space Administration (NASA)Publisher: Createspace Independent Publishing Platform
ISBN: 9781721570492
Category :
Languages : en
Pages : 38
Book Description
The aim of this research is to enhance performance of composite coatings through modification of graphite-reinforced polyimide composite surfaces prior to metal bond coat/ hard topcoat application for use in the erosive and/or oxidative environments of advanced engines. Graphite reinforced polyimide composites, PMR-15 and PMR-II-50, formed by sheet molding and pre-pregging will be surface treated, overlaid with a bond coat and then coated with WC-Co. The surface treatment will include cleaning, RF plasma or ultraviolet light- ozone etching, and deposition of SiO(x) groups. These surface treatments will be studied in order to investigate and improve adhesion and oxidation resistance. The following panels were provided by NASA-Glenn Research Center(NASA-GRC): Eight compression molded PMR-II-50; 6 x 6 x 0.125 in. Two vacuum-bagged PMR-II-50; 12 x 12 x 0.125 in. Eight compression molded PMR-15; 6 x 6 x 0.125 in. One vacuum-bagged PMR-15; 12 x 12 x 0.125 in. All panels were made using a 12 x 12 in. T650-35 8HS (3K-tow) graphite fabric. A diamond-wafering blade, with deionized water as a cutting fluid, was used to cut PMR-II-50 and PMR-15 panels into 1 x 1 in. pieces for surface tests. The panel edges exhibiting delamination were used for the preliminary surface preparation tests as these would be unsuitable for strength and erosion testing. PMR-15 neat resin samples were also provided by NASA GRC. Surface profiles of the as-received samples were determined using a Dektak III Surface profile measuring system. Two samples of compression molded PMR-II-50 and PMR-15, vacuum-bagged PMR-II-50 and PMR-15 were randomly chosen for surface profile measurement according to ANSI/ASME B46.1. Prior to each measurement, the samples were blasted with compressed air to remove any artifacts. Five 10 mm-long scans were made on each sample. The short and long wavelength cutoff filter values were set at 100 and 1000 m, diamond stylus radius was 12.5 microns. Table 1 is a summary of the arith
Developments in Surface Contamination and Cleaning: Applications of Cleaning Techniques
Author: Rajiv KohliPublisher: Elsevier
ISBN: 0128155787
Category : Technology & Engineering
Languages : en
Pages : 832
Book Description
Developments in Surface Contamination and Cleaning: Applications of Cleaning Techniques, Volume Eleven, part of the Developments in Surface Contamination and Cleaning series, provides a guide to recent advances in the application of cleaning techniques for the removal of surface contamination in various industries, such as aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography. The material in this new edition compiles cleaning applications into one easy reference that has been fully updated to incorporate new applications and techniques. Taken as a whole, the series forms a unique reference for professionals and academics working in the area of surface contamination and cleaning. - Presents the latest reviewed technical information on precision cleaning applications as written by established experts in the field - Provides a single source on the applications of innovative precision cleaning techniques for a wide variety of industries - Serves as a guide to the selection of precision cleaning techniques for specific applications
Polymer and Ceramic Composite Materials
Author: Noureddine RamdaniPublisher: CRC Press
ISBN: 1351400509
Category : Technology & Engineering
Languages : en
Pages : 371
Book Description
This book summarizes recent advances in the fabrication methods, properties, and applications of various ceramic-filled polymer matrix composites. Surface-modification methods and chemical functionalization of the ceramic fillers are explored in detail, and the outstanding thermal and mechanical properties of polymer–ceramic composites, the modeling of some of their thermal and mechanical parameters, and their major potential applications are discussed along with detailed examples. Aimed at researchers, industry professionals, and advanced students working in materials science and engineering, this work offering a review of a vast number of references in the polymer–ceramic field, this work helps readers easily advance their research and understanding of the field.
American Society for Composites
Author: Michael HyerPublisher: DEStech Publications, Inc
ISBN: 1605950513
Category : Technology & Engineering
Languages : en
Pages : 2760
Book Description
Scientific and Technical Aerospace Reports
Author: International Aerospace Abstracts
Author: LDEF: 69 Months in Space. Third Post-Retrieval Symposium, Part 2
Author: NASA Conference Publication
Author: Monthly Catalog of United States Government Publications
Author: Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1388
Book Description