Author: Jonathan T. H. WuPublisher:
ISBN:
Category : Embankments
Languages : en
Pages : 242
Book Description
Analysis and Design of Geotextile-reinforced Earth Walls
Author: Jonathan T. H. WuPublisher:
ISBN:
Category : Embankments
Languages : en
Pages : 242
Book Description
Geosynthetic Reinforced Soil (GRS) Walls
Author: Jonathan T. H. WuPublisher: John Wiley & Sons
ISBN: 1119375843
Category : Technology & Engineering
Languages : en
Pages : 414
Book Description
The first book to provide a detailed overview of Geosynthetic Reinforced Soil Walls Geosynthetic Reinforced Soil (GRS) Walls deploy horizontal layers of closely spaced tensile inclusion in the fill material to achieve stability of a soil mass. GRS walls are more adaptable to different environmental conditions, more economical, and offer high performance in a wide range of transportation infrastructure applications. This book addresses both GRS and GMSE, with a much stronger emphasis on the former. For completeness, it begins with a review of shear strength of soils and classical earth pressure theories. It then goes on to examine the use of geosynthetics as reinforcement, and followed by the load-deformation behavior of GRS mass as a soil-geosynthetic composite, reinforcing mechanisms of GRS, and GRS walls with different types of facing. Finally, the book finishes by covering design concepts with design examples for different loading and geometric conditions, and the construction of GRS walls, including typical construction procedures and general construction guidelines. The number of GRS walls and abutments built to date is relatively low due to lack of understanding of GRS. While failure rate of GMSE has been estimated to be around 5%, failure of GRS has been found to be practically nil, with studies suggesting many advantages, including a smaller susceptibility to long-term creep and stronger resistance to seismic loads when well-compacted granular fill is employed. Geosynthetic Reinforced Soil (GRS) Walls will serve as an excellent guide or reference for wall projects such as transportation infrastructure—including roadways, bridges, retaining walls, and earth slopes—that are in dire need of repair and replacement in the U.S. and abroad. Covers both GRS and GMSE (MSE with geosynthetics as reinforcement); with much greater emphasis on GRS walls Showcases reinforcing mechanisms, engineering behavior, and design concepts of GRS and includes many step-by-step design examples Features information on typical construction procedures and general construction guidelines Includes hundreds of line drawings and photos Geosynthetic Reinforced Soil (GRS) Walls is an important book for practicing geotechnical engineers and structural engineers, as well as for advanced students of civil, structural, and geotechnical engineering.
The Application of Polymeric Reinforcement in Soil Retaining Structures
Author: P.M. JarrettPublisher: Springer Science & Business Media
ISBN: 9400914059
Category : Science
Languages : en
Pages : 624
Book Description
Polymeric materials are being used in earthworks construction with ever increasing frequency. The term "Geosynthetics" was recently coined to encompass a diverse range of polymeric products designed for geotechnical purposes. One such purpose is the tensile reinforcement of soil~. As ten sile reinforcement, polymers have been used in the form of textiles, grids, linear strips and single filaments to reinforce earth structures such as road embankments, steep slopes and vertically faced soil retaining walls. A considerable number of retaining structures have been successfully con structed using the tensile reinforcing properties of "geosynthetics" as their primary means of stabilization. Despite such successes sufficient uncertainty exists concerning the performance of these new materials, their manner of interaction with the soil and the new design methods needed, that many authorities are still reticent concerning their use in permanent works. This book represents the proceedings of a NATO Advanced Research Workshop on the "Application of Polymeric Reinforcement in Soil Retaining Struc tures" held at the Royal Military College of Canada in Kingston, Ontario from June 8 to June 12, 1987. The initial concept for the workshop occur red during the ISSMFE Conference in San Francisco in 1985 when a group of geotextile researchers mooted the idea of hoiding a "prediction exercise" to test analytical and design methods for such structures.
Analysis and Design of Geotextile Reinforced Walls
Author: John C. VolkPublisher:
ISBN:
Category : Retaining walls
Languages : en
Pages : 314
Book Description
Earth Wall Design
Author: James Garrison CollinPublisher:
ISBN:
Category :
Languages : en
Pages : 434
Book Description
Reinforced Soil Engineering
Author: Hoe I. LingPublisher: CRC Press
ISBN: 9780203911976
Category : Technology & Engineering
Languages : en
Pages : 532
Book Description
This one-of-a-kind reference evaluates the efficacy, stability, and strength of various soil walls, slopes, and structures enhanced by geosynthetic materials. Offering stimulating contributions from more than 50 leading specialists in the field, Reinforced Soil Engineering compiles recent innovations in design layout, controlled construction, and g
Performance of Reinforced Soil Structures
Author: Alan McGownPublisher: Thomas Telford
ISBN: 9780727716378
Category : Science
Languages : en
Pages : 628
Book Description
The following is just a selection of the contents - Theory and design related to the performance of reinforced soil structures - A study of the influence of soil on the reinforcement load in polymer grid reinforced soil structures - Cellular retaining walls reinforced by geosynthetics:behaviour and design - The results of pull out tests caried out in PFA on a reinforced and unreinforced soil walls - In-situ techniques of reinforced soil - Design and field test on reinforced cut slope - Reinforcing a sand slope surrorting a footing using steel bars - Discussion of papers in session 4 - Effect of reinforcement in embankment - Session Summary
Geosynthetic Reinforced Soil (GRS) Walls
Author: Jonathan T. H. WuPublisher: John Wiley & Sons
ISBN: 111937586X
Category : Technology & Engineering
Languages : en
Pages : 527
Book Description
The first book to provide a detailed overview of Geosynthetic Reinforced Soil Walls Geosynthetic Reinforced Soil (GRS) Walls deploy horizontal layers of closely spaced tensile inclusion in the fill material to achieve stability of a soil mass. GRS walls are more adaptable to different environmental conditions, more economical, and offer high performance in a wide range of transportation infrastructure applications. This book addresses both GRS and GMSE, with a much stronger emphasis on the former. For completeness, it begins with a review of shear strength of soils and classical earth pressure theories. It then goes on to examine the use of geosynthetics as reinforcement, and followed by the load-deformation behavior of GRS mass as a soil-geosynthetic composite, reinforcing mechanisms of GRS, and GRS walls with different types of facing. Finally, the book finishes by covering design concepts with design examples for different loading and geometric conditions, and the construction of GRS walls, including typical construction procedures and general construction guidelines. The number of GRS walls and abutments built to date is relatively low due to lack of understanding of GRS. While failure rate of GMSE has been estimated to be around 5%, failure of GRS has been found to be practically nil, with studies suggesting many advantages, including a smaller susceptibility to long-term creep and stronger resistance to seismic loads when well-compacted granular fill is employed. Geosynthetic Reinforced Soil (GRS) Walls will serve as an excellent guide or reference for wall projects such as transportation infrastructure—including roadways, bridges, retaining walls, and earth slopes—that are in dire need of repair and replacement in the U.S. and abroad. Covers both GRS and GMSE (MSE with geosynthetics as reinforcement); with much greater emphasis on GRS walls Showcases reinforcing mechanisms, engineering behavior, and design concepts of GRS and includes many step-by-step design examples Features information on typical construction procedures and general construction guidelines Includes hundreds of line drawings and photos Geosynthetic Reinforced Soil (GRS) Walls is an important book for practicing geotechnical engineers and structural engineers, as well as for advanced students of civil, structural, and geotechnical engineering.
Reinforced Soil and its Engineering Applications, Third Edition
Author: Swami SaranPublisher: I K International Pvt Ltd
ISBN: 938590972X
Category : Technology & Engineering
Languages : en
Pages : 435
Book Description
Reinforced soil is a composite material formed by the association of frictional soil and tension-resistant elements in the form of sheets, strips, nets or mats of metal, synthetic fabrics, or fibre reinforced plastics and arranged in the soil mass in such a way as to reduce or suppress the tensile strain that might develop under gravity and boundary forces. The variety and range of applications of reinforced soil technique are unlimited. Jones (1985) identified several field applications, viz., retaining walls, abutments, quay walls, embankments, dams, hill roads, housing, foundations, railways, industry, pipe works, waterway structures and underground structures. In several countries structures have been constructed using this technique and the concept has become very popular. The book covers all the important topics like Basic Mechanism, Strength Characteristics, Frictional Characteristics, Reinforced Soil, Wall, Wall with Reinforced Backfill, Foundation on Reinforced Soil, Soil Nailing and Randomly Distributed soil. Each chapter is supported by illustrative examples for easy understanding. In this edition, chapters on Reinforced Soil Wall, Foundation on Reinforced Soil, and Randomly distributed reinforced soil have been substantially modified making the book more useful. The book would well serve and benefit undergraduate and postgraduate students, researchers and professional geotechnical engineers.
Earth Reinforcement and Soil Structures
Author: Colin J F P JonesPublisher: Elsevier
ISBN: 148310446X
Category : Technology & Engineering
Languages : en
Pages : 211
Book Description
Earth Reinforcement and Soil Structures provides a coverage of the basic aspects of reinforced soil. The book is comprised of 12 chapters that cover the theoretical elements up to the practical applications. The first two chapters provide the introduction and historical review of the subject of reinforced soil. The third chapter presents a catalogue of some of the application areas for the use of earth reinforcement, while the fourth chapter covers the theoretical concepts. The next six chapters deal with the practical aspects of earth reinforcements, such as design, construction, costs, and durability. The remaining two chapters provide some worked examples and discuss the developments in earth reinforcement, respectively. The text will be of great use to undergraduate students of civil engineering and other related fields.