An Investigation of Iso-octane Auto-ignition Using a Rapid Compression Facility PDF Download

Author: Xin He
Publisher:
ISBN:
Category :
Languages : en
Pages : 580

View

Book Description

Author: Philip Michael Dimpelfeld
Publisher:
ISBN:
Category : Internal combustion engines
Languages : en
Pages : 534

View

Book Description

Author: Tairin Hahn
Publisher:
ISBN:
Category :
Languages : en
Pages : 162

View

Book Description
As it becomes more and more difficult to find "easy" oil, various alternative fuels are introduced to the markets. These fuels have chemical properties that are different from the traditional gasoline and diesel fuels so that engine efficiency and other engine behaviors may be affected To improve engine efficiency and to identify which alternative fuel is the cleanest fuel solution, it is necessary to compile information about the ignition delay, which governs auto-ignition in spark-ignition (SI), compression-ignition (CI) and homogeneous charge compression-ignition (HCCI) engines. In this study, we measured ignition delay on the Rapid Compression Machine (RCM). RCM is a single-stroke device, which compresses uniform mixtures to engine-like condition. We can interpret from the pressure the detailed heat release process. A comprehensive ignition delay database of toluene/n-heptane mixtures and gasoline/ethanol mixtures was established The data allow us to calculate the auto-ignition behavior in engines. Depending on application the correct choice of alternative fuels may be made.

Author: Ramanan Sankaran
Publisher:
ISBN:
Category :
Languages : en
Pages : 314

View

Book Description

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
A computer model is used to examine oxidation of hydrocarbon fuels in a rapid compression machine. For one of the fuels studied, n-heptane, significant fuel consumption is computed to take place during the compression stroke under some operating conditions, while for the less reactive n-pentane, no appreciable fuel consumption occurs until after the end of compression. The third fuel studied, a 60 PRF mixture of iso-octane and n-heptane, exhibits behavior that is intermediate between that of n-heptane and n-pentane. The model results indicate that computational studies of rapid compression machine ignition must consider fuel reaction during compression in order to achieve satisfactory agreement between computed and experimental results.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 10

View

Book Description
A single pulse reflected shock tube was used to investigate iso-octane ignition over the temperature range of 900-1400 K at a pressure of 1 atm. To account for the anticipated long ignition delay times at the lower temperatures, long shock tube dwell times (12 ms) at lower temperature and near atmospheric pressure were achieved by using argon-helium mix as a driver gas. Chemical thermometer experiments were conducted to remove any uncertainties in determining post-reflected shock temperatures. The ignition delay data obtained in this study are in good agreement (in the overlap region) with the iso-octane ignition data from a previous shock tube study. However, the activation energy of iso-octane ignition obtained in this study in the lower temperature region (

Author: Frédérique Battin-Leclerc
Publisher: Springer Science & Business Media
ISBN: 1447153073
Category : Technology & Engineering
Languages : en
Pages : 657

View

Book Description
This overview compiles the on-going research in Europe to enlarge and deepen the understanding of the reaction mechanisms and pathways associated with the combustion of an increased range of fuels. Focus is given to the formation of a large number of hazardous minor pollutants and the inability of current combustion models to predict the formation of minor products such as alkenes, dienes, aromatics, aldehydes and soot nano-particles which have a deleterious impact on both the environment and on human health. Cleaner Combustion describes, at a fundamental level, the reactive chemistry of minor pollutants within extensively validated detailed mechanisms for traditional fuels, but also innovative surrogates, describing the complex chemistry of new environmentally important bio-fuels. Divided into five sections, a broad yet detailed coverage of related research is provided. Beginning with the development of detailed kinetic mechanisms, chapters go on to explore techniques to obtain reliable experimental data, soot and polycyclic aromatic hydrocarbons, mechanism reduction and uncertainty analysis, and elementary reactions. This comprehensive coverage of current research provides a solid foundation for researchers, managers, policy makers and industry operators working in or developing this innovative and globally relevant field.

Author: Gautam Kalghatgi
Publisher: Springer Nature
ISBN: 9811687358
Category : Technology & Engineering
Languages : en
Pages : 339

View

Book Description
This book focuses on gasoline compression ignition (GCI) which offers the prospect of engines with high efficiency and low exhaust emissions at a lower cost. A GCI engine is a compression ignition (CI) engine which is run on gasoline-like fuels (even on low-octane gasoline), making it significantly easier to control particulates and NOx but with high efficiency. The state of the art development to make GCI combustion feasible on practical vehicles is highlighted, e.g., on overcoming problems on cold start, high-pressure rise rates at high loads, transients, and HC and CO emissions. This book will be a useful guide to those in academia and industry.

Author: Prasanna Chinnathambi
Publisher:
ISBN: 9781687981233
Category : Electronic dissertations
Languages : en
Pages : 262

View

Book Description
In the first part of this work, ignition of methane-air mixtures under excess air dilution is studied. When excess air is used in SI engine operation, thermal efficiency is increased due to increase in compression ratio together with reduced pumping and heat loses. However, stable operation with excess air is challenging due to poor flammability of the resulting diluted mixture. Hence in order to achieve stable and complete combustion a turbulent jet ignition (TJI) system is used to improve combustion of lean methane-air mixtures. Various nozzle designs and operating strategies for a TJI system were tested in a rapid compression machine. 10-90% burn duration measurements were useful in assessing the performance of the nozzle designs while the 0-10% burn durations indicated if optimal air-fuel ratio is achieved within the pre-chamber at the time of ignition. The results indicated that distributed-jets TJI system offered faster and stable combustion while the concentrated-jets TJI system offered better dilution tolerance.Knock in a SI engine occurs due to autoignition of the end gas mixture and typically occurs in the negative temperature coefficient (NTC) region of the fuel-air mixture. Dilution of intake charge with cold exhaust recirculation gases (EGR) reduces combustion temperatures and decreases mixture reactivity thereby reducing knocking tendency. This enables optimal spark timings to be used, thereby increasing efficiency of SI engines which would otherwise be knock limited. Effect of cold EGR dilution is studied in the RCM by measuring the autoignition delay times of gasoline and gasoline surrogate mixtures diluted with varying levels of CO2. The autoignition experiments in the RCM were performed using a novel direct test chamber (DTC) charge preparation approach. The DTC approach enabled mixture preparation directly within the combustion chamber and eliminated the need for mixing tanks. Effect of CO2 dilution in retarding the autoignition delay times was more pronounced in the NTC region, while it was weaker in the low temperature and high temperature regions. The retarding effect was found to be dependent on both the octane number and the fuel composition of the gasoline being studied.Finally, the effect of substituting ethanol(biofuel) in gasoline surrogates for up to 40% by volume is studied. Ethanol is an octane booster, but it blends antagonistically with aromatics such as toluene and synergistically with alkanes with respect to the resulting octane number of the blends. In order to study this blending effect, two gasoline surrogates containing only alkanes (PRF), and alkanes with large amounts of toluene (TRF) are blended with varying levels of ethanol. The ignition delay times of the resulting mixtures are measured in a rapid compression machine and kinetic analysis was carried out using numerical simulations. The kinetic analysis revealed that ethanol controlled the final stages of ignition for the PRF blends when more than 10% by volume of ethanol is present. However, in the TRF blends, toluene controlled the ignition until mole fractions of ethanol became higher than the toluene indicating the reason for the antagonistic blending nature. It was found that the RON values of the resulting blends matched the trend of the ignition delay times recorded at 740K and 21 bar compressed conditions. This enables qualitative assessment of the RON numbers for new biofuel blends by measuring their ignition delay times in the RCM.

Author: Sara McAllister
Publisher: Springer Science & Business Media
ISBN: 1441979433
Category : Science
Languages : en
Pages : 315

View

Book Description
Fundamentals of Combustion Processes is designed as a textbook for an upper-division undergraduate and graduate level combustion course in mechanical engineering. The authors focus on the fundamental theory of combustion and provide a simplified discussion of basic combustion parameters and processes such as thermodynamics, chemical kinetics, ignition, diffusion and pre-mixed flames. The text includes exploration of applications, example exercises, suggested homework problems and videos of laboratory demonstrations