An Introduction to Plumbing and Gas Systems for Medical Facilities for Professional Engineers PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download An Introduction to Plumbing and Gas Systems for Medical Facilities for Professional Engineers PDF full book. Access full book title An Introduction to Plumbing and Gas Systems for Medical Facilities for Professional Engineers by J. Paul Guyer. Download full books in PDF and EPUB format.
Author: J. Paul Guyer Publisher: Guyer Partners ISBN: Category : Technology & Engineering Languages : en Pages : 53
Book Description
Introductory technical guidance for professional engineers and construction managers interested in plumbing and gas systems for hospitals and medical clinics. Here is what is discussed: 1. GENERAL, 1.1 PLUMBING SYSTEMS, 1.2 WATERBORNE PATHOGEN PREVENTION/CONTROL, 1.3 GENERAL DESIGN CONSIDERATIONS, 2. POTABLE WATER SUPPLY SYSTEM, 2.1 QUALITY, 2.2 CONTINUITY OF SERVICE, 2.3 BACKFLOW PREVENTION, 2.4 DOMESTIC HOT WATER SYSTEMS, 2.5 PLUMBING FIXTURES AND OTHER EQUIPMENT, 2.6 SANITARY DRAINAGE SYSTEM, 2.7 STORM WATER DISPOSAL, 2.8 FUEL GAS SERVICE, 2.9 MEDICAL GAS SYSTEMS, 2.9.1 SYSTEMS FOR MEDICAL CLINICS, 2.9.2 DENTAL CLINICS, 2.9.3 SYSTEM CONTROL VALVES, 2.9.4 ALARM SYSTEMS, 2.9.5 GAS SYSTEM SOURCES (STORAGE), 2.9.6 POINT-OF-USE SOURCES, 2.9.7 ALTERNATIVE COMPRESSED AIR SOURCES, 2.9.8 COLOR CODING AND LABELING, 2.9.9 MEDICAL GAS SYSTEMS OUTLETS, 2.9.10 EMERGENCY POWER SOURCE, 2.9.11 MEDICAL COMPRESSED AIR (MCA), 2.9.12 DENTAL COMPRESSED AIR (DCA), 2.9.13 LABORATORY AIR (LA), 2.9.14 INSTRUMENT AIR (IA), 2.9.15 SURGICAL HANDPIECE DRIVE AIR (SHDA), 2.9.16 MEDICAL-SURGICAL VACUUM SYSTEM (MV), 2.9.17 DENTAL HIGH VACUUM (DHV), 2.9.18 DENTAL LOW VACUUM (DLV), 2.9.19 CENTRAL DENTAL HIGH-VOLUME LABORATORY DUST EVACUATION (LDE), 2.9.20 WASTE ANESTHESIA GAS DISPOSAL (WAGD), 2.9.21 OXYGEN (OX), 2.9.22 NITROUS OXIDE (NO), 2.9.23 NITROGEN (NI), 2.9.24 STERILIZATION GAS, 2.9.25 PROCESS GAS.
Author: J. Paul Guyer Publisher: Guyer Partners ISBN: Category : Technology & Engineering Languages : en Pages : 53
Book Description
Introductory technical guidance for professional engineers and construction managers interested in plumbing and gas systems for hospitals and medical clinics. Here is what is discussed: 1. GENERAL, 1.1 PLUMBING SYSTEMS, 1.2 WATERBORNE PATHOGEN PREVENTION/CONTROL, 1.3 GENERAL DESIGN CONSIDERATIONS, 2. POTABLE WATER SUPPLY SYSTEM, 2.1 QUALITY, 2.2 CONTINUITY OF SERVICE, 2.3 BACKFLOW PREVENTION, 2.4 DOMESTIC HOT WATER SYSTEMS, 2.5 PLUMBING FIXTURES AND OTHER EQUIPMENT, 2.6 SANITARY DRAINAGE SYSTEM, 2.7 STORM WATER DISPOSAL, 2.8 FUEL GAS SERVICE, 2.9 MEDICAL GAS SYSTEMS, 2.9.1 SYSTEMS FOR MEDICAL CLINICS, 2.9.2 DENTAL CLINICS, 2.9.3 SYSTEM CONTROL VALVES, 2.9.4 ALARM SYSTEMS, 2.9.5 GAS SYSTEM SOURCES (STORAGE), 2.9.6 POINT-OF-USE SOURCES, 2.9.7 ALTERNATIVE COMPRESSED AIR SOURCES, 2.9.8 COLOR CODING AND LABELING, 2.9.9 MEDICAL GAS SYSTEMS OUTLETS, 2.9.10 EMERGENCY POWER SOURCE, 2.9.11 MEDICAL COMPRESSED AIR (MCA), 2.9.12 DENTAL COMPRESSED AIR (DCA), 2.9.13 LABORATORY AIR (LA), 2.9.14 INSTRUMENT AIR (IA), 2.9.15 SURGICAL HANDPIECE DRIVE AIR (SHDA), 2.9.16 MEDICAL-SURGICAL VACUUM SYSTEM (MV), 2.9.17 DENTAL HIGH VACUUM (DHV), 2.9.18 DENTAL LOW VACUUM (DLV), 2.9.19 CENTRAL DENTAL HIGH-VOLUME LABORATORY DUST EVACUATION (LDE), 2.9.20 WASTE ANESTHESIA GAS DISPOSAL (WAGD), 2.9.21 OXYGEN (OX), 2.9.22 NITROUS OXIDE (NO), 2.9.23 NITROGEN (NI), 2.9.24 STERILIZATION GAS, 2.9.25 PROCESS GAS.
Author: J. Paul Guyer, P.E., R.A. Publisher: Guyer Partners ISBN: Category : Architecture Languages : en Pages : 296
Book Description
Introductory technical guidance for professional engineers, architects and construction managers interested in design and construction of hospitals and medical and dental clinics. Here is what is discussed: 1. ARCHITECTURAL 2. HVAC SYSTEMS 3. PLUMBING AND GAS 4. ELECTRICAL SYSTEMS 5. FIRE PROTECTION 6. COMMUNICATION SYSTEMS 7. TRANSPORTATION, LOGISTICS AND WAYFINDING 8. INTERSTITIAL BUILDING SYSTEMS 9. TELECOMMUNICATION AND CABLING SYSTEMS 10. UNIVERSAL X-RAY ROOM 11. SEISMIC.
Author: J. Paul Guyer, P.E., R.A. Publisher: Guyer Partners ISBN: Category : Technology & Engineering Languages : en Pages : 287
Book Description
Introductory technical guidance for mechanical and electrical engineers and construction managers interested in design and construction of mechanical and electrical systems for hospitals and medical and dental clinics. Here is what is discussed: 1. ELECTRICAL SYSTEMS 2. COMMUNICATION SYSTEMS 3. FOOD SERVICE 4. HVAC SYSTEMS 5. PLUMBING AND GAS 6. MECHANICAL/ELECTRICAL EQUIPMENT SOUND DATA 7. TELECOMMUNICATION CABLING 8. HANDICAPPED ACCESSIBILITY - PLUMBING.
Author: J. Paul Guyer, P.E., R.A. Publisher: Guyer Partners ISBN: Category : Technology & Engineering Languages : en Pages : 30
Book Description
This publication provides technical guidance for mechanical engineers and other professional engineers and construction managers interested in gas and vacuum systems hospitals and medical and dental clinics. Here is what is discussed:1. GENERAL 2. MEDICAL GAS AND VACUUM SYSTEMS 3. LABORATORY GAS AND VACUUM SYSTEMS FOR RESEARCH AND MEDICAL LABORATORIES 4. ORAL EVACUATION SYSTEM 5. DENTAL COMPRESSED AIR SYSTEMS 6. DESIGN FOR DENTAL UNIT WATER LINES 7. FUEL GAS SYSTEMS.
Author: Michael L. Frankel Publisher: McGraw Hill Professional ISBN: 0071597220 Category : Technology & Engineering Languages : en Pages : 1040
Book Description
A Comprehensive Guide to Facility Piping Systems Fully up-to-date with the latest codes and standards, this practical resource contains everything you need to plan, select, design, specify, and test piping systems for industry, commercial, and institutional applications. The book includes complete coverage of pipes, fittings, valves, jointing methods, hangers, supports, pumps, tanks, and other required equipment. Facility Piping Systems Handbook, Third Edition, progresses from fundamentals of systems operation to a design procedure that allows quick and accurate component and pipe sizing. Listings of FDA, EPA, and OSHA requirements are included. Complete with formulas, charts, and tables, this invaluable all-in-one volume will save you time and money on the job. Coverage includes: Water treatment and purification Heat transfer, insulation, and freeze protection Cryogenic storage Facility steam and condensate systems Liquid fuel storage and dispensing Fuel gas and compressed gas systems Vacuum air systems Animal facility piping systems Life safety systems Nonpotable and drinking water systems Swimming pools, spas, and water attractions And more
Author: J. Paul Guyer Publisher: Guyer Partners ISBN: Category : Technology & Engineering Languages : en Pages : 44
Book Description
Introductory technical guidance for mechanical engineers and other professional engineers interested in design and construction of medical air and gas systems for hospitals and medical clinics. Here is what is discussed: 1. GENERAL, 2. MEDICAL GAS AND VACUUM SYSTEMS, 3. LABORATORY GAS AND VACUUM SYSTEMS FOR RESEARCH AND MEDICAL LABORATORIES, 4. ORAL EVACUATION SYSTEM, 5. DENTAL COMPRESSED AIR SYSTEMS, 6. DESIGN FOR DENTAL UNIT WATER LINES, 7. FUEL GAS SYSTEMS.
Author: J. Paul Guyer, P.E., R.A. Publisher: Guyer Partners ISBN: Category : Architecture Languages : en Pages : 370
Book Description
Introductory technical guidance for professional engineers, architects and construction managers interested in design of hospitals and medical clinics. Here is what is discussed: 1. ARCHITECTURAL DETAILS, 2. DRAINAGE SYSTEMS, 3. MEDICAL GAS AND VACUUM SYSTEMS, 4. HVAC SYSTEMS, 5. PLUMBING AND PIPING, 6. PLUMBING FIXTURES AND EQUIPMENT, 7. PLUMBING CRITERIA, 8. PUMBING SCHEMATICS AND SCHEDULES, 9. WATER SYSTEMS, 10. SITE PLANNING, 11. TRANSPORTATION, LOGISTICS, WAYFINDING, 12. WATER SUPPLY.
Author: World Health Organization Publisher: World Health Organization ISBN: 9241563184 Category : Business & Economics Languages : en Pages : 139
Book Description
This publication describes the processes involved in the design installation and maintenance of modern plumbing systems. It recommends a number of plumbing system design and installation specifications that have demonstrated their validity from years of experience. It also examines the microbiological chemical physical and financial risks associated with plumbing and outlines the major risk management strategies that are used in the plumbing industry and emphasizes the importance of measures to conserve supplies of clean water. This work is dedicated to assisting developing countries in achieving the best possible plumbing levels to ensure the highest health benefits from use of sound plumbing practices. It is aimed at administrators and plumbers working in areas that are served by a mains drinking- water supply or sewerage system or are about to install a mains drinking- water supply or sewerage system. It should be of particular value to those working in countries or areas that are in the early stages of introducing modern plumbing systems. While it draws attention to the problems of drinking- water supply and waste removal in developing countries and outlines some of the strategies currently used it does not systematically cover issues specific to developing countries.
Author: J. Guyer Publisher: Createspace Independent Publishing Platform ISBN: 9781499139075 Category : Languages : en Pages : 0
Book Description
This publication provides an introduction to the design of plumbing and gas systems for medical and dental treatment facilities including hospitals and clinics.
Author: J. Paul Guyer
Author: J. Paul Guyer
Author: J. Paul Guyer, P.E., R.A.
Author: J. Paul Guyer, P.E., R.A.
Author: J. Paul Guyer, P.E., R.A.
Author: Michael L. Frankel
Author: J. Paul Guyer
Author: J. Paul Guyer, P.E., R.A.
Author: World Health Organization
Author: G. J. Blower
Author: J. Guyer