An Exploratory Study of a Three-Dimensional Shock Wave Boundary Layer Interaction at Mach 3 PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download An Exploratory Study of a Three-Dimensional Shock Wave Boundary Layer Interaction at Mach 3 PDF full book. Access full book title An Exploratory Study of a Three-Dimensional Shock Wave Boundary Layer Interaction at Mach 3 by B. Oskam. Download full books in PDF and EPUB format.
Author: B. Oskam Publisher: ISBN: Category : Languages : en Pages : 15
Book Description
An exploratory experimental investigation has been carried out on the three dimensional flow fields caused by the interaction of oblique shock waves and a planar turbulent boundary layer. The study was performed at a free stream Mach number of 2.95, a Reynolds number per inch of 1.6 million and near adiabatic wall conditions. The interaction was studied on two experimental configurations having different initial boundary layer thicknesses (delta = approx. 0.13 and 0.55 inches). Both surface measurements as well as complete flow field surveys were performed. The main contributions of the present investigation are two experimentally derived flow field models for shock generator angles of 4 deg and 10 deg. Based upon both static pressure and surface flow patterns, as well as heat transfer data, the interaction region can be characterized as quasi-two-dimensional along the shock direction in the region studied. A critical examination of the occurrence of 'ordinary' flow separation and its character, as applied to the present problem, was carried out. It was concluded that McCabe's criterion, as used by the previous investigators, is not a sufficient condition to determine the onset of flow separation.
Author: B. Oskam Publisher: ISBN: Category : Languages : en Pages : 15
Book Description
An exploratory experimental investigation has been carried out on the three dimensional flow fields caused by the interaction of oblique shock waves and a planar turbulent boundary layer. The study was performed at a free stream Mach number of 2.95, a Reynolds number per inch of 1.6 million and near adiabatic wall conditions. The interaction was studied on two experimental configurations having different initial boundary layer thicknesses (delta = approx. 0.13 and 0.55 inches). Both surface measurements as well as complete flow field surveys were performed. The main contributions of the present investigation are two experimentally derived flow field models for shock generator angles of 4 deg and 10 deg. Based upon both static pressure and surface flow patterns, as well as heat transfer data, the interaction region can be characterized as quasi-two-dimensional along the shock direction in the region studied. A critical examination of the occurrence of 'ordinary' flow separation and its character, as applied to the present problem, was carried out. It was concluded that McCabe's criterion, as used by the previous investigators, is not a sufficient condition to determine the onset of flow separation.
Author: C. Herbert Law Publisher: ISBN: Category : Aerodynamic heating Languages : en Pages : 52
Book Description
Experimental results of an investigation of the three-dimensional interaction between a skewed shock wave and a turbulent boundary layer are presented. Surface pressure and heat transfer distributions and oil flow photographs were obtained at a freestream Mach number of 5.85 and two Reynolds numbers of ten and twenty million per foot. The model configuration consisted of a shock generator mounted perpendicularly to a flat plate. The shock generator leading edge was sharp and nonswept and intersected the flat plate surface about 8.5 inches downstream of the flat plate leading edge. The shock generator surface was 7.55 inches long and 3 inches high and its angle to the freestream flow was adjusted from 4 to 20 degrees. The generated shock waves were of sufficient strength to produce turbulent boundary layer separation on the flat plate surface.
Author: David S. Dolling Publisher: ISBN: Category : Languages : en Pages : 75
Book Description
An experimental study of three-dimensional (3-D) shock wave turbulent boundary layer interaction has been carried out. Interactions generated by fin models having sharp and hemi-cylindrically blunted leading edges have been studied. The emphasis in this particular study was twofold. First, the influence of incoming turbulent boundary layer thickness delta on the streamwise, spanwise and vertical scaling of the interaction was examined. Turbulent boundary layers varying in thickness from .127 cm (.05 in.) to 2.27 cm (0.89 in.) were used. In addition, a study has been conducted to examine the effects of the ratio D/delta (where D is the blunt fin leading edge diameter) on the interaction properties and scaling. Second, an investigation has been started to examine the unsteady shock wave-boundary layer structure and the resulting high frequency, large amplitude pressure fluctuations which occur ahead of and around the blunt fin leading edge. This is an area which in the past has been largely ignored, yet has important implications, since it is not clear that any mean surface property or flowfield measurements have any real physical significant. To date, measurement techniques and computer software have been developed and exploratory measurements made in the undisturbed turbulent boundary layer and also on the plane of symmetry ahead of the blunt fin.
Author: Seymour M. Bogdonoff Publisher: ISBN: Category : Languages : en Pages : 39
Book Description
The present report briefly reviews the work accomplished on the study of three-dimensional shock wave turbulent boundary layer interactions at a Mach 3. The work consisted of two major thrusts; 1) Modeling of the complex interaction and detailed experiments coordinated with extensive computations; and 2) Exploratory studies of control concepts for a 20 deg fin and crossing shock configurations. The completed works have been reported and are briefly reviewed. A brief resume is presented of incompleted results on complex interactions, new heat transfer techniques, initial spanwise boundary layer effects, and studies in a new Low Turbulence Variable Geometry facility. Keywords: Three-dimensional shock waves; Turbulent boundary layer; Supersonic flow fields; Surface heat transfer data. (edc).
Author: Holger Babinsky Publisher: Cambridge University Press ISBN: 1139498649 Category : Technology & Engineering Languages : en Pages : 481
Book Description
Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Author: Seymour M. Bogdonoff Publisher: ISBN: Category : Languages : en Pages : 75
Book Description
An extensive experimental study of three-dimensional shock wave turbulent boundary layer interactions caused by shock generators defined solely by angles has been carried out at Mach 3. Sharp fins, sharp swept fins, swept wedges, and semi-cones have been used to generate a wide range of shock waves. The interaction of these waves with turbulent boundary layers has been investigated by surface flow visualization, mean surface static pressure distributions, flowfield surveys of total pressure and yaw, and several flowfield visualization techniques. Some exploratory high frequency surface pressure measurements have been carried out to evaluate the steadiness of these interactions. Scaling laws for both surface and flowfield features have been derived. Some limited studies were carried out at a Mach number of 2. A flowfield study has shown that the initial part of interactions caused by the same strength and geometrical shock wave generated by different shock generators are all similar. The 'footprints' of the interactions, as shown by surface flow visualization, can be categorized as approximately conical or cylindrical, and the boundaries between these two regions have been defined for both Mach 3 and Mach 2. There are still questions with regards to the detailed flowfield structures and physical mechanisms, but the three-dimensional interactions appeared to be less unsteady than that of two-dimensional separated flows.
Author: B. Oskam
Author: B. Oskam
Author: S. M. Bogdonoff
Author: C. Herbert Law
Author: David S. Dolling
Author: Seymour M. Bogdonoff
Author: Holger Babinsky
Author: Seymour M. Bogdonoff
Author: C. Herbert Law
Author: B. Shapey
Author: S. Bell