An Experimental Study of the Characteristics of High-speed Turbulent Flames in Premixed Gases PDF Download

Author: Sydney Howard Reiter
Publisher:
ISBN:
Category :
Languages : en
Pages : 96

View

Book Description

Author: Nedunchezhian Swaminathan
Publisher: Cambridge University Press
ISBN: 1139498584
Category : Technology & Engineering
Languages : en
Pages : 447

View

Book Description
A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.

Author: Sina Kheirkhah
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
Characteristics of turbulent premixed flames were investigated experimentally. The investigations were performed using Mie scattering, Particle Image Velocimetry, Rayleigh scattering, and broad-band luminosity imaging techniques. Methane-air flames associated with a relatively wide range of turbulence intensities, fuel-air equivalence ratios, and mean bulk flow velocities were investigated. For a relatively moderate value of turbulence intensity, a new concept is introduced and utilized to provide a detailed description associated with interaction of turbulent flow and flame front. The concept pertains to reactants velocity estimated at the vicinity of the flame front and is referred to as the edge velocity. Specifically, it is shown that fluctuations of the flame front position are induced by fluctuations of the edge velocity. For a relatively wide range of turbulence intensity, several characteristics of turbulent premixed flames, namely, front topology, brush thickness, surface density, and consumption speeds are investigated. For the first time, several flame front structures are identified and studied. It is shown that, due to formation of these front structures, the regime of turbulent premixed combustion transitions from the regime of counter-gradient diffusion to that of the gradient diffusion. In addition to these, a comprehensive study is performed to investigate influence of flame configuration on several flame front characteristics. It is obtained that, although changing the flame configuration influences several flame characteristics, the trends associated with the effects of governing parameters on the characteristics are nearly independent of the flame configuration.

Author: Vahid Vaezi
Publisher:
ISBN:
Category :
Languages : en
Pages : 310

View

Book Description

Author: M. D. Fox
Publisher:
ISBN:
Category : Flame
Languages : en
Pages : 33

View

Book Description
Current concepts of flame propagation in premixed, turbulent gas streams are examined. This leads to the conclusion that the link between theory and experiment is entirely inadequate and incapable of improvement by existing methods. A series of new methods is implemented in an attempt to short-circuit the unprofitable chain of hypothesis and experiment which has hampered the identification of dubious steps. Methods of introducing uniform turbulence at relatively slow flows and improvements in light sources allow analysis of the approach flow by photographing particles illuminated by an interrupted Tyndall beam. Three new optical deflection methods are used to give a measure of the randomness of flame-front orientation, of the time-mean structure of the flame and of the instantaneous shape of the corrugated front. It is found that this corrugated surface propagates at a velocity considerably in excess of the normal laminar burning velocity. Quantitative analysis of the frequency of "peaks" and "valleys" on the surface, together with comparative data from the apex of laminar flames, suggests an explanation in terms of the effects of curvature and, secondarily, of the influence of small scale turbulence.

Author: Ankit Tyagi
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
This dissertation investigates the physics of interactions between turbulent premixed flames. It is known that multiple flame configurations provide better stability characteristics compared to a large single-flame. However, the advantages of multiple flames are limited by flame proximity as flame-flame interactions tend to reduce the burning efficiency of the reactant gases. Previous studies have shown that interactions between multiple flames directly impact the flame structure and its propagation, resulting in reduced burning efficiency. Previous experimental studies of interacting flames addressed flame-flame interactions investigating their effects on combustor stability and efficiency from a global perspective. However, the local flame-flame interaction physics was not addressed comprehensively, in part because these studies were limited to specific flow and flame configurations. In particular, these studies focused on swirling flames in bluff-body configurations typical of modern combustor geometries. Furthermore, these studies lacked flowfield measurements and were limited to flame structure and heat release rate measurements due to the complex nature of the experimental configurations. Much of the work to date on understanding the local physics of interactions comes from direct numerical simulations (DNS), but these studies treated idealized configurations of limited practical utility.To bridge these two gaps, an experimental investigation of flame-flame interactions was performed using a dual-burner rig, composed of two flames, built to facilitate precise variations in flame spacing. This rig was designed to operate in different configurations. These facilitated the focus on local interaction physics. In particular, the rig was built to study interacting V-flames and Bunsen flames. Moreover, the design of the dual-burners permitted conducting studies of nonreacting flow interactions with flames to better understand local physics of the flame. Direct flame and flow measurements were performed to characterize the mutual interaction of flame and the local flowfield. In particular, flame structure and flow were characterized using synchronized OH-planar laser-induced fluorescence (OH-PLIF) and stereoscopic-particle image velocimetry (s-PIV). These measurements were performed at a sampling rate of 10 kHz to obtain converged statistics on flame-flame interactions. A novel image processing technique was implemented for robust detection and characterization of flame-flame interaction events from OH-PLIF images.Using this experimental approach, the following studies were conducted: i) effects of flame spacing on flame structure of interacting V-flames, ii) effects of multiple flames on frequency, topology, and orientation of local flame-flame interactions, iii) effects of high mean-shear flow on flame-flame interactions, and iv) effects of pocket formation on flame dynamics. In the first study, flame spacing variations in V-flames were found to directly impact flame attachment. For smaller flame spacings, recirculation of hot combustion products near the bluff-bodies facilitated a secondary flame branch attachment in the shear layers in the interaction regions. For larger flame spacing, the secondary attachment became intermittent, indicating that closer flame spacing resulted in better attachment and stability characteristics for these flames. In the second study, the presence of adjacent flames was found to directly impact the frequencies of flame-flame interaction events. Dual-flames showed lower reactant-side interactions rates and higher product-side interactions rates when compared with single-flames. For dual-flames, comparisons between interaction orientation and local strain rate orientation showed that compressive forces led to flame front merging or pinch-off. The third study, which focused on how mean shear affects the local flame dynamics, found that high-mean shear flows entrained the flame away from the center of the burner. This entrainment directly reduced interaction event frequencies along the flame branch closest to the high mean-shear flow, while interaction event frequency in the other branch increased. Finally, flame pocket formation was investigated and results showed that a majority of the reactant pockets burned-out, while a majority of the product pockets merged with the flame surface. These results suggested that pocket behavior in turbulent flames can change local flame dynamics and it is important to capture these effects to accurately predict flame behavior. Additionally, limitations of planar high-speed imaging techniques were explored and a statistical framework, using probabilistic models, was presented in the context of reactant pocket propagation. The outcome of this work provided improved uncertainty estimation for planar measurements in three-dimensional flows.This experimental investigation provided deeper insights into the local physics of flame-flame interactions, in practical configurations, using detailed flame and flow measurements. The presence of adjacent flames influenced the attachment characteristics and local flame structure that directly impacted the stability of these multiple flame configurations. Local compressive forces facilitated the occurrence of these events, highlighting the importance of changes to the flowfield due to adjacent flames. Pocket formation, which directly affected reactant gas burning efficiency, was found to occur frequently. Taken together, these results provided comprehensive insights into the effects of flame-flame interactions that enhance our understanding of the nature of interacting flames.

Author: Andrei Lipatnikov
Publisher: CRC Press
ISBN: 1466510242
Category : Science
Languages : en
Pages : 551

View

Book Description
Lean burning of premixed gases is considered to be a promising combustion technology for future clean and highly efficient gas turbine combustors. Yet researchers face several challenges in dealing with premixed turbulent combustion, from its nonlinear multiscale nature and the impact of local phenomena to the multitude of competing models. Filling a gap in the literature, Fundamentals of Premixed Turbulent Combustion introduces the state of the art of premixed turbulent combustion in an accessible manner for newcomers and experienced researchers alike. To more deeply consider current research issues, the book focuses on the physical mechanisms and phenomenology of premixed flames, with a brief discussion of recent advances in partially premixed turbulent combustion. It begins with a summary of the relevant knowledge needed from disciplines such as thermodynamics, chemical kinetics, molecular transport processes, and fluid dynamics. The book then presents experimental data on the general appearance of premixed turbulent flames and details the physical mechanisms that could affect the flame behavior. It also examines the physical and numerical models for predicting the key features of premixed turbulent combustion. Emphasizing critical analysis, the book compares competing concepts and viewpoints with one another and with the available experimental data, outlining the advantages and disadvantages of each approach. In addition, it discusses recent advances and highlights unresolved issues. Written by a leading expert in the field, this book provides a valuable overview of the physics of premixed turbulent combustion. Combining simplicity and topicality, it helps researchers orient themselves in the contemporary literature and guides them in selecting the best research tools for their work.

Author: Jihang Li
Publisher:
ISBN:
Category :
Languages : en
Pages :

View

Book Description
Lean-premixed gas turbines, due to their superior emission performance, have been widely used in the industry. However, lean-premixed combustion is susceptible to combustion instability, which has become a major concern in the design and operation of lean-premixed gas turbines. Passive secondary flames, also known as pilot flames, are commonly used for control of combustion instability. However, the underlying mechanism whereby a pilot flame suppresses combustion instability is not fully understood. This limits the improvement of pilot systems.This dissertation presents an experimental study on the effect of a pilot flame on combustion instabilities in an atmospheric, laboratory-scale, single-nozzle, swirl-stabilized, lean-premixed combustor. The pilot flame is a central jet flame injected from the centerbody, which can operate in either the technically-premixed or the fully-premixed modes, depending on the types of pilot injectors. Piezoelectric sensors are utilized to measure the pressure fluctuation and the velocity fluctuation. High speed CH* chemiluminescence techniques are used to measure the dynamics of the flame. The instability characteristics of the technically-premixed unpiloted flame are measured at varying combustor length. Four distinct instability modes with different frequencies are observed. A one-dimensional simulation is conducted to calculate the natural frequencies and mode shapes of the instabilities. The effect of varying the percent pilot of a technically-premixed pilot flame on the technically-premixed combustion instabilities in different modes is studied. Instability maps to the percent pilot and the overall equivalence ratio are presented and discussed. The instability boundaries in each instability map, which separates the unstable regions from the stable regions, are discussed in detail by analyzing the high-speed images and Rayleigh index images. The results show that the pilot flame affects the main flame dynamics primarily through enhancing flame attachment and flame oscillation in the inner shear layer. The effect of independently varying the pilot air, pilot fuel and pilot mixture flow rates on the technically-premixed combustion instabilities are studied by utilizing a modified pilot injector. The results show that the effect of the pilot flame on the combustion instability is primarily determined by the equivalence ratio, but not the mixture flow rate of the pilot flame. The results support the statement that pilot flames influence the main flame dynamics by heat recirculation and demonstrate that the effect of the pilot flame is determined by its ability to change the time-averaged recirculation zone temperature. The structures of the pilot flame are presented and discussed.Fully-premixed flame transfer functions under the influence of a premixed pilot flame are investigated. The flame transfer functions show distinct behaviors at low frequencies and high frequencies. At low frequencies, the pilot flame has a weak effect on the FTF gain and phase, while at high frequencies, increasing the percent pilot reduces the FTF gain and shifts the FTF phase. High-speed chemiluminescence images show the pilot flame enhances the fluctuation near the base of the flame, which enhances the destructive interference within the inner shear layer, reduces the FTF gain and shifts the FTF phase at high frequencies. By separating the flame transfer function into different regions, it was found that a pilot flame only influences the inner shear layer, but not the near-wall region and the outer recirculation zone.

Author: Huahua Xiao
Publisher: Springer
ISBN: 3662483793
Category : Technology & Engineering
Languages : en
Pages : 162

View

Book Description
This thesis offers important new insights into and a deeper understanding of premixed flame instabilities and hydrogen safety. Further, it explains the underlying mechanisms that control the combustion processes in tubes. The author’s previous scientific accomplishments, which include a series of high-quality publications in the best journals in our field, Combustion and Flame and International Journal of Heat and Mass Transfer, are very impressive and have already made a significant contribution to combustion science.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 22

View

Book Description
A methodology for investigating premixed turbulent flames propagating in intense isotropic turbulence has been developed. The burner uses a turbulence generator developed by Videto and Santavicca and the flame is stabilized by weak-swirl generated by air injectors. This set-up produces stable premixed turbulent flames under a wide range of mixture conditions and turbulence intensities. The experiments are designed to investigate systematically the changes in flame structures for conditions which can be classified as wrinkled laminar flames, corrugated flames and flames with distributed reaction zones. Laser Doppler anemometry and Rayleigh scattering techniques are used to determine the turbulence and scalar statistics. In the intense turbulence, the flames are found to produce very little changes in the mean and rams velocities. Their flame speed increase linearly with turbulence intensity as for wrinkled laminar flames. The Rayleigh scattering pdfs for flames within the distributed reaction zone regime are distinctly bimodal. The probabilities of the reacting states (i.e. contributions from within the reaction zone) is not higher than those of wrinkled laminar flame. These results show that there is no drastic changes in flame structures at Karlovitz number close to unity. This suggest that the Klimov-Williams criterion under-predicts the resilience of wrinkled flamelets to intense turbulence.