Author: Constantine D. Rakopoulos Publisher: Springer Science & Business Media ISBN: 1848823754 Category : Technology & Engineering Languages : en Pages : 408
Book Description
Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.
Author: National Research Council Publisher: National Academies Press ISBN: 0309216389 Category : Science Languages : en Pages : 373
Book Description
Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Author: Mehrdad Zangeneh Publisher: SAE International ISBN: 0768079764 Category : Technology & Engineering Languages : en Pages : 94
Book Description
Legislative requirements to reduce CO2 emissions by 2020 have resulted in significant efforts by car manufacturers to explore various methods of pollution abatement. One of the most effective ways found so far is by shortening the cylinder stroke and downsizing the engine. This new engine then needs to be boosted, or turbocharged, to create the full and original load torque. Turbocharging has been and will continue to be a key component to the new technologies that will make a positive difference in the next-generation engines of years to come. Concepts in Turbocharging for Improved Efficiency and Emissions Reduction explores the many ways that turbocharging will deliver concrete results in meeting the new realities of sustainable, green transportation. This collection of very focused technical papers, selected by Mehrdad Zangeneh, PhD., a professor of thermo-fluids at University College in London, provides an assessment of several novel designs intended to improve fuel consumption and cap emissions, while maintaining torque at all speeds. The book is divided into four sections, each addressing the most cutting-edge technologies on the market today: o Two-Stage Turbocharging o Variable Geometry Compressors o Unconventional Compressor Configurations o Electrically Assisted Turbocharging
Author: Evangelos G. Giakoumis Publisher: Nova Science Publishers ISBN: 9781536122398 Category : Superchargers Languages : en Pages : 0
Book Description
Supercharging has long been established as the most successful means to maximise power output from a specific engine size. Through supercharging, the inlet air density is increased, usually by means of a compressor, and by doing so the amount of air trapped in the cylinders is increased accordingly. As a result, efficient burning of a proportionately higher amount of fuel is enabled. By far, the most successful version of supercharging is turbocharging. Here, the expansion in a turbine of the exhaust gases leaving the cylinders supplies the power needed to drive the compressor. At the moment, practically all diesel engines are turbocharged, with a continuously increasing penetration in the highly competitive market of SI-powered vehicles. The current book on turbochargers and turbocharging, comprising fifteen chapters, gathers important and novel research on many modern aspects of turbocharging for all kinds of gasoline and diesel-powered engine applications (automotive, truck, marine and aircraft). For example, characterisation of the value proposition of turbocharged vehicles, marine engines turbo-compounding, fundamental issues of turbocharger lag and its relation with engine-out PM emissions, variable geometric compressors, automotive two-stage turbocharging, and dynamic operation of turbochargers including VGT and surging effects are amongst the topics analysed. Review papers form a very important part of the book, namely the discussion and in-depth analysis of various automotive boosting systems, turbocharger reduced-order modeling, heat transfer and pulsating flows in turbomachinery, mathematical models for turbocharged engines, and turbomachine-based engine throttling. A considerable portion of the book (seven chapters) deals with control-oriented modeling techniques relating to the turbocharger and/or the whole engine power-plant. Such models have proven valuable during the design of both turbochargers and turbocharged engines, and are described and discussed in detail for a variety of automotive and aircraft applications. The book is written for post-graduate students, engineers and researchers in the field of internal combustion engines (diesel and SI) and turbochargers.
Author: Institution of Mechanical Engineers Publisher: CRC Press ISBN: 1000316777 Category : Technology & Engineering Languages : en Pages : 390
Book Description
14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms.
Author: Andrey A. Radionov Publisher: Springer Nature ISBN: 3030548147 Category : Technology & Engineering Languages : en Pages : 1296
Book Description
This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Author: Constantine D. Rakopoulos
Author: Neil Watson
Author: 
Author: Society of Automotive Engineers
Author: National Research Council
Author: Mehrdad Zangeneh
Author: SAE.
Author: Evangelos G. Giakoumis
Author: Institution of Mechanical Engineers
Author: Andrey A. Radionov