Alloying of Austenitic Steels for Operation at Low Temperatures PDF Download

Author: E. A. ULYANIN
Publisher:
ISBN:
Category :
Languages : en
Pages : 4

View

Book Description

Author: Mattias Calmunger
Publisher: Linköping University Electronic Press
ISBN: 9176858960
Category :
Languages : en
Pages : 83

View

Book Description
Advanced heat resistant materials are important to achieve the transition to long term sustainable power generation. The global increase in energy consumption and the global warming from greenhouse gas emissions create the need for more sustainable power generation processes. Biomass-fired power plants with higher efficiency could generate more power but also reduce the emission of greenhouse gases, e.g. CO2. Biomass offers no net contribution of CO2 to the atmosphere. To obtain greater efficiency of power plants, one option is to increase the temperature and the pressure in the boiler section of the power plant. This requires improved material properties, such as higher yield strength, creep strength and high-temperature corrosion resistance, as well as structural integrity and safety. Today, some austenitic stainless steels are design to withstand temperatures up to 650 °C in tough environments. Nickel-based alloys are designed to withstand even higher temperatures. Austenitic stainless steels are more cost effective than nickel-based alloys due to a lower amount of expensive alloying elements. However, the performance of austenitic stainless steels at the elevated temperatures of future operation conditions in biomass-red power plants is not yet fully understood. This thesis presents research on the influence of long term high-temperature ageing on mechanical properties, the influence of very slow deformation rates at high-temperature on deformation, damage and fracture, and the influence of high-temperature environment and cyclic operation conditions on the material behaviour. Mechanical and thermal testing have been performed followed by subsequent studies of the microstructure, using scanning electron microscopy, to investigate the material behaviours. Results shows that long term ageing at high temperatures leads to the precipitation of intermetallic phases. These intermetallic phases are brittle at room temperature and become detrimental for the impact toughness of some of the austenitic stainless steels. During slow strain rate tensile deformation at elevated temperature time dependent deformation and recovery mechanisms are pronounced. The creep-fatigue interaction behaviour of an austenitic stainless steel show that dwell time gives shorter life at a lower strain range, but has none or small effect on the life at a higher strain range. Finally, this research results in an increased knowledge of the structural, mechanical and chemical behaviour as well as a deeper understanding of the deformation, damage and fracture mechanisms that occur in heat resistant austenitic alloys at high-temperature environments. It is believed that in the long term, this can contribute to material development achieving the transition to more sustainable power generation in biomass-red power plants.

Author: Wojciech Borek
Publisher: BoD – Books on Demand
ISBN: 9535137018
Category : Technology & Engineering
Languages : en
Pages : 219

View

Book Description
Stainless steel is still one of the fastest growing materials. Today, the austenitic stainless steel with the classic composition of 18% Cr and 8% Ni (grade 304L) is still the most widely used by far in the world. The unique characteristic of stainless steel arises from three main factors. The versatility results from high corrosion resistance, excellent low- and high-temperature properties, high toughness, formability, and weldability. The long life of stainless steels has been proven in service in a wide range of environments, together with low maintenance costs compared to other highly alloyed metallic materials. The retained value of stainless steel results from the high intrinsic value and easy recycling. Stainless steel, especially of austenitic microstructure, plays a crucial role in achieving sustainable development nowadays, so it is also important for further generations.

Author: Curtis W. Kovach
Publisher:
ISBN:
Category : Stainless steel
Languages : en
Pages : 96

View

Book Description

Author: American Society of Mechanical Engineers
Publisher: ASTM International
ISBN:
Category : Metals
Languages : en
Pages : 830

View

Book Description

Author: Ralph Michael McClintock
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 202

View

Book Description

Author: Stephen Hall
Publisher: Butterworth-Heinemann
ISBN: 0123877857
Category : Science
Languages : en
Pages : 454

View

Book Description
Annotation A handbook for chemical and process engineers who need a solution to their practical on-the-job problems. It solves process design problems quickly, accurately and safely, with hundreds of techniques, shortcuts and calculations.

Author:
Publisher: ASTM International
ISBN:
Category : Stainless steel
Languages : en
Pages : 364

View

Book Description

Author: A. Shirzadi
Publisher: Elsevier
ISBN: 0857097555
Category : Technology & Engineering
Languages : en
Pages : 519

View

Book Description
Current fleets of conventional and nuclear power plants face increasing hostile environmental conditions due to increasingly high temperature operation for improved capacity and efficiency, and the need for long term service. Additional challenges are presented by the requirement to cycle plants to meet peak-load operation. This book presents a comprehensive review of structural materials in conventional and nuclear energy applications. Opening chapters address operational challenges and structural alloy requirements in different types of power plants. The following sections review power plant structural alloys and methods to mitigate critical materials degradation in power plants.

Author: Frank Lees
Publisher: Butterworth-Heinemann
ISBN: 0123977827
Category : Technology & Engineering
Languages : en
Pages : 3685

View

Book Description
Safety in the process industries is critical for those who work with chemicals and hazardous substances or processes. The field of loss prevention is, and continues to be, of supreme importance to countless companies, municipalities and governments around the world, and Lees' is a detailed reference to defending against hazards. Recognized as the standard work for chemical and process engineering safety professionals, it provides the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing three volume reference instead. - The process safety encyclopedia, trusted worldwide for over 30 years - Now available in print and online, to aid searchability and portability - Over 3,600 print pages cover the full scope of process safety and loss prevention, compiling theory, practice, standards, legislation, case studies and lessons learned in one resource as opposed to multiple sources