Airfoil Aeroacoustics, LES and Acoustic Analogy Predictions PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Airfoil Aeroacoustics, LES and Acoustic Analogy Predictions PDF full book. Access full book title Airfoil Aeroacoustics, LES and Acoustic Analogy Predictions by William Roberto Wolf. Download full books in PDF and EPUB format.
Author: William Roberto Wolf Publisher: Stanford University ISBN: Category : Languages : en Pages : 238
Book Description
The development of physics-based noise prediction tools for analysis of aerodynamic noise sources is of paramount importance since noise regulations have become more stringent. Direct simulation of aerodynamic noise remains prohibitively expensive for engineering problems because of the resolution requirements. Therefore, hybrid approaches that consist of predicting nearfield flow quantities by a suitable CFD simulation and farfield sound radiation by aeroacoustic integral methods are more attractive. In this work, we apply the fast multipole method (FMM) to accelerate the solution of boundary integral equation methods such as the boundary element method (BEM) and the Ffowcs Williams & Hawkings (FWH) acoustic analogy formulation. The FMM-BEM is implemented for the solution of acoustic scattering problems and the effects of non-uniform potential flows on acoustic scattering are investigated. The FMM-FWH is implemented for the solution of two and three-dimensional problems of sound propagation. The effects of flow convection and non-linear quadrupole sources are assessed through the study of sound generated by unsteady laminar flows. Finally, a hybrid methodology is applied for the investigation of airfoil noise. This study is important for the design of aerodynamic shapes such as wings and high-lift devices, as well as wind turbine blades, fans and propellers. The present investigation of airfoil self-noise generation and propagation concerns the broadband noise that arises from the interaction of turbulent boundary layers with the airfoil trailing edge and tonal noise that arises from vortex shedding generated by laminar boundary layers. Nearfield acoustic sources are computed using compressible large eddy simulation (LES) and acoustic predictions are performed by the FMM-FWH. Numerical simulations are conducted for a NACA0012 airfoil with tripped boundary layers and blunt rounded trailing edge at different Mach numbers and angles of incidence. The effects of non-linear quadrupole sources and convection are assessed. In order to validate the numerical solutions, flow simulation and acoustic prediction results are compared to experimental data available in the literature and excellent agreement is observed.
Author: William Roberto Wolf Publisher: Stanford University ISBN: Category : Languages : en Pages : 238
Book Description
The development of physics-based noise prediction tools for analysis of aerodynamic noise sources is of paramount importance since noise regulations have become more stringent. Direct simulation of aerodynamic noise remains prohibitively expensive for engineering problems because of the resolution requirements. Therefore, hybrid approaches that consist of predicting nearfield flow quantities by a suitable CFD simulation and farfield sound radiation by aeroacoustic integral methods are more attractive. In this work, we apply the fast multipole method (FMM) to accelerate the solution of boundary integral equation methods such as the boundary element method (BEM) and the Ffowcs Williams & Hawkings (FWH) acoustic analogy formulation. The FMM-BEM is implemented for the solution of acoustic scattering problems and the effects of non-uniform potential flows on acoustic scattering are investigated. The FMM-FWH is implemented for the solution of two and three-dimensional problems of sound propagation. The effects of flow convection and non-linear quadrupole sources are assessed through the study of sound generated by unsteady laminar flows. Finally, a hybrid methodology is applied for the investigation of airfoil noise. This study is important for the design of aerodynamic shapes such as wings and high-lift devices, as well as wind turbine blades, fans and propellers. The present investigation of airfoil self-noise generation and propagation concerns the broadband noise that arises from the interaction of turbulent boundary layers with the airfoil trailing edge and tonal noise that arises from vortex shedding generated by laminar boundary layers. Nearfield acoustic sources are computed using compressible large eddy simulation (LES) and acoustic predictions are performed by the FMM-FWH. Numerical simulations are conducted for a NACA0012 airfoil with tripped boundary layers and blunt rounded trailing edge at different Mach numbers and angles of incidence. The effects of non-linear quadrupole sources and convection are assessed. In order to validate the numerical solutions, flow simulation and acoustic prediction results are compared to experimental data available in the literature and excellent agreement is observed.
Author: Nik Ahmad Ridhwan Nik Mohd. Publisher: Springer Nature ISBN: 9819968747 Category : Technology & Engineering Languages : en Pages : 280
Book Description
This book consists of selected peer-reviewed papers from the 2nd International Seminar on Aeronautics and Energy (ISAE 2022) focusing on the theme to revive the aviation industry post-COVID-19 pandemic. The topics discussed in this book include aircraft design and optimization, computational fluid dynamics (CFD) simulation and experimental aerodynamics, aircraft structure and aeroelasticity, guidance control and navigation, aircraft manufacturing and health monitoring avionics and system integration of UAV/drones, SITL AND HITL application on drones, rockets and missile, industrial wind engineering, green fuel and aviation sustainability, and aviation management. This book is a valuable resource for academicians and industry players in the field of aviation and sustainability.
Author: Elena Ciappi Publisher: Springer ISBN: 3319767801 Category : Technology & Engineering Languages : en Pages : 365
Book Description
This is the proceedings of the Second International Workshop on Flow Induced Noise and Vibration (FLINOVIA), which was held in Penn State, USA, in April 2016. The authors’ backgrounds represent a mix of academia, government, and industry, and several papers include applications to important problems for underwater vehicles, aerospace structures and commercial transportation. The book offers a valuable reference guide for all those working in the area of flow-induced vibration and noise. Flow induced vibration and noise (FIVN) remains a critical research topic. Even after over 50 years of intensive research, accurate and cost-effective FIVN simulation and measurement techniques remain elusive. This book gathers the latest research from some of the most prominent experts in the field. The book describes methods for characterizing wall pressure fluctuations, including subsonic and supersonic turbulent boundary layer flows over smooth and rough surfaces using computational methods like Large Eddy Simulation; for inferring wall pressure fluctuations using inverse techniques based on panel vibrations or holographic pressure sensor arrays; for calculating the resulting structural vibrations and radiated sound using traditional finite element methods, as well as advanced methods like Energy Finite Elements; for using scaling approaches to universally collapse flow-excited vibration and noise spectra; and for computing time histories of structural response, including alternating stresses.
Author: Stewart Glegg Publisher: Academic Press ISBN: 0128097930 Category : Science Languages : en Pages : 554
Book Description
Aeroacoustics of Low Mach Number Flows: Fundamentals, Analysis, and Measurement provides a comprehensive treatment of sound radiation from subsonic flow over moving surfaces, which is the most widespread cause of flow noise in engineering systems. This includes fan noise, rotor noise, wind turbine noise, boundary layer noise, and aircraft noise. Beginning with fluid dynamics, the fundamental equations of aeroacoustics are derived and the key methods of solution are explained, focusing both on the necessary mathematics and physics. Fundamentals of turbulence and turbulent flows, experimental methods and numerous applications are also covered. The book is an ideal source of information on aeroacoustics for researchers and graduate students in engineering, physics, or applied math, as well as for engineers working in this field. Supplementary material for this book is provided by the authors on the website www.aeroacoustics.net. The website provides educational content designed to help students and researchers in understanding some of the principles and applications of aeroacoustics, and includes example problems, data, sample codes, course plans and errata. The website is continuously being reviewed and added to. Explains the key theoretical tools of aeroacoustics, from Lighthill’s analogy to the Ffowcs Williams and Hawkings equation Provides detailed coverage of sound from lifting surfaces, boundary layers, rotating blades, ducted fans and more Presents the fundamentals of sound measurement and aeroacoustic wind tunnel testing
Author: Roberto Camussi Publisher: Springer Science & Business Media ISBN: 3709114586 Category : Technology & Engineering Languages : en Pages : 453
Book Description
The articles in this volume present the state-of-the-art in noise prediction, modeling and measurement. The articles are partially based on class notes provided during the course `Noise sources in turbulent shear flows', given at CISM on April 2011. The first part contains general concepts of aero acoustics, including vortex sound theory and acoustic analogies, in the second part particular emphasis is put into arguments of interest for engineers and relevant for aircraft design: jet noise, airfoil broadband noise, boundary layer noise (including interior noise and its control) and the concept of noise sources, their theoretical modeling and identification in turbulent lows. All these arguments are treated extensively with the inclusion of many practical examples and references to engineering applications.
Author: Shia-Hui Peng Publisher: Springer Science & Business Media ISBN: 3642141684 Category : Technology & Engineering Languages : en Pages : 361
Book Description
Hybrid modelling of turbulent flows, combining RANS and LES techniques, has received increasing attention over the past decade to fill the gap between (U)RANS and LES computations in aerodynamic applications at industrially relevant Reynolds numbers. With the advantage of hybrid RANS-LES modelling approaches, being considerably more computationally efficient than full LES and more accurate than (U)RANS, particularly for unsteady aerodynamic flows, has motivated numerous research and development activities. These activities have been increasingly stimulated by the provision of modern computing facilities. The present book contains the contributions presented at the Third Symposium on Hybrid RANS-LES Methods, held in Gdansk, Poland, 10-12 June 2009. To a certain extent, this conference was a continuation of the first symposium taking place in Stockholm (Sweden, 2005) and the second in Corfu (Greece, 2007). Motivated by the extensive interest in the research community, the papers presented at the Corfu symposium were published by Springer in the book entitled “Advances in Hybrid RANS-LES Modelling” (in Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Vol. 97). At the Gdansk symposium, along with four invited keynotes, given respectively by S. Fu, U. Michel, M. Sillen and P. Spalart, another 28 papers were presented on the following topics: Unsteady RANS, LES, Improved DES Methods, Hybrid RANS-LES Methods, DES versus URANS and other Hybrid Methods, Modelli- related Numerical Issues and Industrial Applications. After the symposium all full papers have been further reviewed and revised for publication in the present book.
Author: Christophe Brun Publisher: Springer Science & Business Media ISBN: 3540899561 Category : Technology & Engineering Languages : en Pages : 344
Book Description
Large Eddy Simulation (LES) is a high-fidelity approach to the numerical simulation of turbulent flows. Recent developments have shown LES to be able to predict aerodynamic noise generation and propagation as well as the turbulent flow, by means of either a hybrid or a direct approach. This book is based on the results of two French/German research groups working on LES simulations in complex geometries and noise generation in turbulent flows. The results provide insights into modern prediction approaches for turbulent flows and noise generation mechanisms as well as their use for novel noise reduction concepts.
Author: William Roberto Wolf
Author: William Roberto Wolf
Author: Nik Ahmad Ridhwan Nik Mohd.
Author: Elena Ciappi
Author: Stewart Glegg
Author: Harvey H. Hubbard
Author: Roberto Camussi
Author: Shia-Hui Peng
Author: Christophe Brun
Author: Leilei Chen
Author: Center for Turbulence Research (U.S.)