Author: Department of the Army
Publisher: Createspace Independent Pub
ISBN: 9781481146654
Category : History
Languages : en
Pages : 212
Book Description
This manual, “Airdrop of Supplies and Equipment: Rigging Containers (FM 4-20.103),” provides the latest approved doctrine for rigging airdrop containers. It is written for use by a parachute rigger or jumpmaster. Container loads are loads that are rigged for airdrop in airdrop containers such as the A-7A airdrop cargo sling assembly, the A-21 cargo bag assembly, and the A-22 cargo bag assembly. These containers are packed with supplies, disassembled equipment, or small items of ready-to-use equipment prepared for airdrop. Loads may be required to be cushioned with energy dissipating material (honeycomb), felt, or cellulose wadding depending on the load requirements and the method of airdrop. The number and types of parachutes required to stabilize the load and slow its descent depend on the type of container used, the weight of the load, and the type of airdrop. This manual consists of six parts. a. Part one contains general information for container loads and aircraft. b. Part two contains procedures for rigging A-7A container loads. c. Part three contains procedures for rigging A-21 container loads. d. Part four contains procedures for rigging A-22 container loads. e. Part five contains procedures for rigging low-cost aerial delivery systems. f. Part six contains procedures for rigging specialized loads and equipment.
Airdrop of Supplies and Equipment: Rigging Containers (FM 4-20. 103 / MCRP 4-11. 3C / To 13C7-1-11)
Author: Department of the Army
Publisher: Createspace Independent Pub
ISBN: 9781481146654
Category : History
Languages : en
Pages : 212
Book Description
This manual, “Airdrop of Supplies and Equipment: Rigging Containers (FM 4-20.103),” provides the latest approved doctrine for rigging airdrop containers. It is written for use by a parachute rigger or jumpmaster. Container loads are loads that are rigged for airdrop in airdrop containers such as the A-7A airdrop cargo sling assembly, the A-21 cargo bag assembly, and the A-22 cargo bag assembly. These containers are packed with supplies, disassembled equipment, or small items of ready-to-use equipment prepared for airdrop. Loads may be required to be cushioned with energy dissipating material (honeycomb), felt, or cellulose wadding depending on the load requirements and the method of airdrop. The number and types of parachutes required to stabilize the load and slow its descent depend on the type of container used, the weight of the load, and the type of airdrop. This manual consists of six parts. a. Part one contains general information for container loads and aircraft. b. Part two contains procedures for rigging A-7A container loads. c. Part three contains procedures for rigging A-21 container loads. d. Part four contains procedures for rigging A-22 container loads. e. Part five contains procedures for rigging low-cost aerial delivery systems. f. Part six contains procedures for rigging specialized loads and equipment.
Publisher: Createspace Independent Pub
ISBN: 9781481146654
Category : History
Languages : en
Pages : 212
Book Description
This manual, “Airdrop of Supplies and Equipment: Rigging Containers (FM 4-20.103),” provides the latest approved doctrine for rigging airdrop containers. It is written for use by a parachute rigger or jumpmaster. Container loads are loads that are rigged for airdrop in airdrop containers such as the A-7A airdrop cargo sling assembly, the A-21 cargo bag assembly, and the A-22 cargo bag assembly. These containers are packed with supplies, disassembled equipment, or small items of ready-to-use equipment prepared for airdrop. Loads may be required to be cushioned with energy dissipating material (honeycomb), felt, or cellulose wadding depending on the load requirements and the method of airdrop. The number and types of parachutes required to stabilize the load and slow its descent depend on the type of container used, the weight of the load, and the type of airdrop. This manual consists of six parts. a. Part one contains general information for container loads and aircraft. b. Part two contains procedures for rigging A-7A container loads. c. Part three contains procedures for rigging A-21 container loads. d. Part four contains procedures for rigging A-22 container loads. e. Part five contains procedures for rigging low-cost aerial delivery systems. f. Part six contains procedures for rigging specialized loads and equipment.
Airdrop of Supplies and Equipment: Rigging Communication Control Vehicles (FM 10-500-23 / To 13C7-14-461)
Author: Department Army
Publisher: CreateSpace
ISBN: 9781481002523
Category :
Languages : en
Pages : 156
Book Description
This manual tells and shows how to prepare and rig the Mobile Microwave Landing System (MMLS) which is packed in 11 hard-shell protective cases. These cases are rigged with four 3kw generators and four fuel cans in the beds of an M998 HMMWV truck and an M116A2 3/4 -ton trailer. The load is rigged on a 24-foot, type V platform with three G-11 cargo parachutes for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The Standard Intergraded Command Post System (SICPS) and the Common Hardware/Software 2nd Generation Package (CHS-2) are rigged on a 20-foot, type V airdrop platform with three G-11 cargo parachutes for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The M996 CAV is rigged on a 20-foot, type V airdrop platform for low-velocity airdrop form a C-130, C-141, C-5, and C-17. The load requires three G-11 cargo parachutes. The CAV is rigged with communication equipment. The M998 cargo/troop carrier (two seater) is rigged with a radio equipment GRC/206 Air Force pallet. Other equipment included on the load is the 1.5 kilowatt, 28-VDC generator set, two cable spools, tow 5-gallon fuel cans, and one 5-gallon water can. The load requires two G-11 cargo parachutes and is rigged for low-velocity airdrop from a C-103, C-141, C-5, and C-17. The M998 cargo/troop carrier (four seater) is rigged with a radio equipment GRD/206 Air Force pallet. Other equipment included on the load is on cable spool, two-5 gallon fuel cans, on 5-gallon water can, one roll of field wire, one set of slave cable, and one camouflage net with support poles. Also included with this load are one shovel, one ax, two sets of antennas, 2 quarts of oil, 1 quart of transmission fluid, one funnel, and one fuel nozzle. The truck weighs 6,020 pounds with ¾ tank of fuel and equipment installed. The load requires two G-11 cargo parachutes and is rigged for low-velocity airdrop from a C-130, C-141, C-5, and C-17.
Publisher: CreateSpace
ISBN: 9781481002523
Category :
Languages : en
Pages : 156
Book Description
This manual tells and shows how to prepare and rig the Mobile Microwave Landing System (MMLS) which is packed in 11 hard-shell protective cases. These cases are rigged with four 3kw generators and four fuel cans in the beds of an M998 HMMWV truck and an M116A2 3/4 -ton trailer. The load is rigged on a 24-foot, type V platform with three G-11 cargo parachutes for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The Standard Intergraded Command Post System (SICPS) and the Common Hardware/Software 2nd Generation Package (CHS-2) are rigged on a 20-foot, type V airdrop platform with three G-11 cargo parachutes for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The M996 CAV is rigged on a 20-foot, type V airdrop platform for low-velocity airdrop form a C-130, C-141, C-5, and C-17. The load requires three G-11 cargo parachutes. The CAV is rigged with communication equipment. The M998 cargo/troop carrier (two seater) is rigged with a radio equipment GRC/206 Air Force pallet. Other equipment included on the load is the 1.5 kilowatt, 28-VDC generator set, two cable spools, tow 5-gallon fuel cans, and one 5-gallon water can. The load requires two G-11 cargo parachutes and is rigged for low-velocity airdrop from a C-103, C-141, C-5, and C-17. The M998 cargo/troop carrier (four seater) is rigged with a radio equipment GRD/206 Air Force pallet. Other equipment included on the load is on cable spool, two-5 gallon fuel cans, on 5-gallon water can, one roll of field wire, one set of slave cable, and one camouflage net with support poles. Also included with this load are one shovel, one ax, two sets of antennas, 2 quarts of oil, 1 quart of transmission fluid, one funnel, and one fuel nozzle. The truck weighs 6,020 pounds with ¾ tank of fuel and equipment installed. The load requires two G-11 cargo parachutes and is rigged for low-velocity airdrop from a C-130, C-141, C-5, and C-17.
Airdrop of Supplies and Equipment
Author: Department of the Army
Publisher: Createspace Independent Publishing Platform
ISBN: 9781976077258
Category :
Languages : en
Pages : 160
Book Description
This manual, "Airdrop of Supplies and Equipment: Rigging Communication Control Vehicles" (FM 10-500-23), tells and shows how to prepare and rig the Mobile Microwave Landing System (MMLS) which is packed in 11 hard-shell protective cases. The cases are rigged with four 3kw generators and four fuel cans in the beds of an M998 HMMWV truck and an M116A2 3/4-ton trailer. The load is rigged on a 24-foot, type V platform with three G-11 cargo parachutes for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The Standard Intergraded Command Post System (SICPS) and the Common Hardware/Software 2nd Generation Package (CHS-2) are rigged on a 20-foot, type V airdrop platform with three G-11 cargo parachutes for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The M996 CAV is rigged on a 20-foot, type V airdrop platform for low-velocity airdrop from a C-130, C-141, C- 5, and C-17. The load requires three G-11 cargo parachutes. The CAV is rigged with communication equipment. The M998 cargo/troop carrier (two seater) is rigged with a radio equipment GRC/206 Air Force pallet. Other equipment included on the load is the 1.5-kilowatt, 28-VDC generator set, two cable spools, two 5-gallon fuel cans, and one 5-gallon water can. The load requires two G-ll cargo parachutes and is rigged for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The M998 cargo/troop carrier (four seater), is rigged with a radio equipment GRC/206 Air Force pallet. Other equipment included on the load is one cable spool, two 5-gallon fuel cans, one 5-gallon water can, one roll of field wire, one set of slave cables, and one camouflage net with support poles. Also included with this load are one shovel, one ax, two sets of antennas, 2 quarts of oil, 1 quart of transmission fluid, one funnel, and one fuel nozzle. The truck weighs 6,020 pounds with 3/4 tank of fuel and equipment installed. The load requires two G-ll cargo parachutes and is rigged for low velocity airdrop from a C-130, C-141, C-5, and C-17.
Publisher: Createspace Independent Publishing Platform
ISBN: 9781976077258
Category :
Languages : en
Pages : 160
Book Description
This manual, "Airdrop of Supplies and Equipment: Rigging Communication Control Vehicles" (FM 10-500-23), tells and shows how to prepare and rig the Mobile Microwave Landing System (MMLS) which is packed in 11 hard-shell protective cases. The cases are rigged with four 3kw generators and four fuel cans in the beds of an M998 HMMWV truck and an M116A2 3/4-ton trailer. The load is rigged on a 24-foot, type V platform with three G-11 cargo parachutes for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The Standard Intergraded Command Post System (SICPS) and the Common Hardware/Software 2nd Generation Package (CHS-2) are rigged on a 20-foot, type V airdrop platform with three G-11 cargo parachutes for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The M996 CAV is rigged on a 20-foot, type V airdrop platform for low-velocity airdrop from a C-130, C-141, C- 5, and C-17. The load requires three G-11 cargo parachutes. The CAV is rigged with communication equipment. The M998 cargo/troop carrier (two seater) is rigged with a radio equipment GRC/206 Air Force pallet. Other equipment included on the load is the 1.5-kilowatt, 28-VDC generator set, two cable spools, two 5-gallon fuel cans, and one 5-gallon water can. The load requires two G-ll cargo parachutes and is rigged for low-velocity airdrop from a C-130, C-141, C-5, and C-17. The M998 cargo/troop carrier (four seater), is rigged with a radio equipment GRC/206 Air Force pallet. Other equipment included on the load is one cable spool, two 5-gallon fuel cans, one 5-gallon water can, one roll of field wire, one set of slave cables, and one camouflage net with support poles. Also included with this load are one shovel, one ax, two sets of antennas, 2 quarts of oil, 1 quart of transmission fluid, one funnel, and one fuel nozzle. The truck weighs 6,020 pounds with 3/4 tank of fuel and equipment installed. The load requires two G-ll cargo parachutes and is rigged for low velocity airdrop from a C-130, C-141, C-5, and C-17.
Airdrop of Supplies and Equipment: Rigging High-Mobility Multipurpose Wheeled Vehicles (HMMWV) (FM 4-20. 117 / MCRP 4-11. 3M / To 13C7-1-111)
Author: Department of the Army
Publisher: Createspace Independent Pub
ISBN: 9781481134705
Category : History
Languages : en
Pages : 344
Book Description
This manual, “Airdrop of Supplies and Equipment: Rigging High-Mobility Multipurpose Wheeled Vehicles (HMMWV) (FM 4-20.117),” tells and shows how to rig HMMWV-series trucks in the Army inventory at the time of publication for low-velocity parachute airdrop. Some specialized truck configurations and loads are included. The HMMWV-series trucks that can be rigged using the procedures in this manual include: M998 Cargo/Troop Carriers, M1038 Cargo/Troop Carriers With Winch, M1025 Armament Carriers, Armored, M1025A2 Armament Carrier (Modified), With Winch, M1026 Armament Carriers, Armored With Winch, M1026 Armament Carrier (Modified), M966 TOW Carriers, Armored, M1036 TOW Carrier, Armored With Winch, M1121 TOW Carrier, Armored, M1043 Armament Carriers, With Supplemental Armor, M1044 Armament Carriers, With Supplemental Armor and Winch, M1045 Armament Carriers, With Supplemental Armor, M1046 TOW Carriers, With Supplemental Armor and Winch, M1037 S250 Shelter Carrier, M1037 Cargo/Troop Carrier (Modified), With Winch, M1042 S250 Shelter Carrier, With Winch, M1097 Truck, Utility, Heavy Variant, M1113 Truck, Utility, Expanded Capacity, M1114 Armament Carrier, Expanded Capacity, Up-Armored, With Winch, M1151 Armament Carrier, Expanded Capacity.
Publisher: Createspace Independent Pub
ISBN: 9781481134705
Category : History
Languages : en
Pages : 344
Book Description
This manual, “Airdrop of Supplies and Equipment: Rigging High-Mobility Multipurpose Wheeled Vehicles (HMMWV) (FM 4-20.117),” tells and shows how to rig HMMWV-series trucks in the Army inventory at the time of publication for low-velocity parachute airdrop. Some specialized truck configurations and loads are included. The HMMWV-series trucks that can be rigged using the procedures in this manual include: M998 Cargo/Troop Carriers, M1038 Cargo/Troop Carriers With Winch, M1025 Armament Carriers, Armored, M1025A2 Armament Carrier (Modified), With Winch, M1026 Armament Carriers, Armored With Winch, M1026 Armament Carrier (Modified), M966 TOW Carriers, Armored, M1036 TOW Carrier, Armored With Winch, M1121 TOW Carrier, Armored, M1043 Armament Carriers, With Supplemental Armor, M1044 Armament Carriers, With Supplemental Armor and Winch, M1045 Armament Carriers, With Supplemental Armor, M1046 TOW Carriers, With Supplemental Armor and Winch, M1037 S250 Shelter Carrier, M1037 Cargo/Troop Carrier (Modified), With Winch, M1042 S250 Shelter Carrier, With Winch, M1097 Truck, Utility, Heavy Variant, M1113 Truck, Utility, Expanded Capacity, M1114 Armament Carrier, Expanded Capacity, Up-Armored, With Winch, M1151 Armament Carrier, Expanded Capacity.
Airdrop of Supplies and Equipment: Rigging Typical Supply Loads (FM 4-20. 112 / To 13C7-1-8)
Author: Department Army
Publisher: CreateSpace
ISBN: 9781481105781
Category :
Languages : en
Pages : 412
Book Description
This manual tells and shows how to prepare and rig mass supply loads. Procedures are given for typical loads that can be contained by the methods shown. These procedures are meant as a guide, and may be adapted to specific loads. Procedures are also given for some specific ammunition loads. This manual is designed for all parachute riggers.
Publisher: CreateSpace
ISBN: 9781481105781
Category :
Languages : en
Pages : 412
Book Description
This manual tells and shows how to prepare and rig mass supply loads. Procedures are given for typical loads that can be contained by the methods shown. These procedures are meant as a guide, and may be adapted to specific loads. Procedures are also given for some specific ammunition loads. This manual is designed for all parachute riggers.
MCDP 1 Warfighting
Author: USMC
Publisher:
ISBN: 9781790765720
Category :
Languages : en
Pages : 108
Book Description
MCDP 1 WARFIGHTING Since Fleet Marine Force Manual 1, Warfighting, was first published in 1989, it has had a significant impact both inside and outside the Marine Corps. That manual has changed the way Marines think about warfare. It has caused energetic debate and has been translated into several foreign languages, issued by foreign militaries, and published commercially. It has strongly influenced the development of doctrine by our sister Services. Our current naval doctrine is based on the tenets of maneuver warfare as described in that publication. Current and emerging concepts such as operational maneuver from the sea derive their doctrinal foundation from the philosophy contained in Warfighting. Our philosophy of warfighting, as described in the manual, is in consonance with joint doctrine, contributing to our ability to operate harmoniously with the other Services.
Publisher:
ISBN: 9781790765720
Category :
Languages : en
Pages : 108
Book Description
MCDP 1 WARFIGHTING Since Fleet Marine Force Manual 1, Warfighting, was first published in 1989, it has had a significant impact both inside and outside the Marine Corps. That manual has changed the way Marines think about warfare. It has caused energetic debate and has been translated into several foreign languages, issued by foreign militaries, and published commercially. It has strongly influenced the development of doctrine by our sister Services. Our current naval doctrine is based on the tenets of maneuver warfare as described in that publication. Current and emerging concepts such as operational maneuver from the sea derive their doctrinal foundation from the philosophy contained in Warfighting. Our philosophy of warfighting, as described in the manual, is in consonance with joint doctrine, contributing to our ability to operate harmoniously with the other Services.
Field Manual FM 4-20. 102 Airdrop of Supplies and Equipment: Rigging Airdrop Platforms June 2006 (MCRP 4-11. 3J) US Army
Author: United States Government Us Army
Publisher: CreateSpace
ISBN: 9781477604755
Category : Reference
Languages : en
Pages : 176
Book Description
FM 4-20.102, MCRP 4-11.3J, NAVSEA SS400-AB-MMO-010, TO 13C7-1-5 The purpose of this manual is to provide the latest approved procedures for rigging airdrop Platforms. This manual is written for use by the parachute rigger. It consists of 10 chapters. The procedures contained in this manual are typical and serve as the standard from which all platform rigging is derived. Due to the uniqueness of some equipment and items, the procedures in a specific rigging manual may be different from those in this manual. When procedures are different, those in the specific manual will be followed. When an item of equipment is specified to be used for which its minimum or maximum capacity is exceeded, a notice of exception will be printed at the beginning of each paragraph in each rigging manual where the exception is authorized. When an item of airdrop equipment is replaced or a procedure is changed, it will be impossible to change all manuals in the field at one time. Therefore, this manual will be changed, when necessary. Chapters 1 through 10 contain specific limitations and general information about the rigging of airdrop platform loads for low-velocity airdrop from US aircraft and also shows and tells how to prepare, attach, and safety tie some of the components and systems used in the specific rigging manuals of the FM 4-20.100/TO 13C7 series. Note: New information concerning the Extraction Parachute Jettison System (EPJS) has been added along with some new procedures for the extraction force transfer coupling (EFTC). The C-141 and C-5 aircraft have been taken out and the C-17 aircraft information has been added. Also, a new user friendly format has been introduced combining general information and rigging information in each chapter.
Publisher: CreateSpace
ISBN: 9781477604755
Category : Reference
Languages : en
Pages : 176
Book Description
FM 4-20.102, MCRP 4-11.3J, NAVSEA SS400-AB-MMO-010, TO 13C7-1-5 The purpose of this manual is to provide the latest approved procedures for rigging airdrop Platforms. This manual is written for use by the parachute rigger. It consists of 10 chapters. The procedures contained in this manual are typical and serve as the standard from which all platform rigging is derived. Due to the uniqueness of some equipment and items, the procedures in a specific rigging manual may be different from those in this manual. When procedures are different, those in the specific manual will be followed. When an item of equipment is specified to be used for which its minimum or maximum capacity is exceeded, a notice of exception will be printed at the beginning of each paragraph in each rigging manual where the exception is authorized. When an item of airdrop equipment is replaced or a procedure is changed, it will be impossible to change all manuals in the field at one time. Therefore, this manual will be changed, when necessary. Chapters 1 through 10 contain specific limitations and general information about the rigging of airdrop platform loads for low-velocity airdrop from US aircraft and also shows and tells how to prepare, attach, and safety tie some of the components and systems used in the specific rigging manuals of the FM 4-20.100/TO 13C7 series. Note: New information concerning the Extraction Parachute Jettison System (EPJS) has been added along with some new procedures for the extraction force transfer coupling (EFTC). The C-141 and C-5 aircraft have been taken out and the C-17 aircraft information has been added. Also, a new user friendly format has been introduced combining general information and rigging information in each chapter.
Airdrop of Supplies and Equipment
Author:
Publisher:
ISBN:
Category : Airdrop
Languages : en
Pages : 104
Book Description
This manual describes and illustrates the techniques and procedures for preparing and rigging typical container loads for low-velocity and high-velocity airdrop. It also contains and illustrates procedures for rigging typical supply loads of POL, 55-gallon drums of gasoline, individual combat meals, containers for airdrop in jungle terrain, AN/TPS-22 radar set in A-22 cargo bag, gyro azimuth theodolite in A-21 cargo bag, and 50-g.p.m. dispenser in A-22 cargo bag. These procedures will not be used for rigging ammunition in containers for airdrop; procedures outlined in TM 10-500-53/TO 13C7-18-41 will be used for this purpose.
Publisher:
ISBN:
Category : Airdrop
Languages : en
Pages : 104
Book Description
This manual describes and illustrates the techniques and procedures for preparing and rigging typical container loads for low-velocity and high-velocity airdrop. It also contains and illustrates procedures for rigging typical supply loads of POL, 55-gallon drums of gasoline, individual combat meals, containers for airdrop in jungle terrain, AN/TPS-22 radar set in A-22 cargo bag, gyro azimuth theodolite in A-21 cargo bag, and 50-g.p.m. dispenser in A-22 cargo bag. These procedures will not be used for rigging ammunition in containers for airdrop; procedures outlined in TM 10-500-53/TO 13C7-18-41 will be used for this purpose.
Airdrop of Supplies and Equipment: Rigging 105-Millimeter Howitzers (FM 4-20. 119 / To 13C7-10-31)
Author: Department of the Army
Publisher: Createspace Independent Pub
ISBN: 9781481106276
Category : History
Languages : en
Pages : 302
Book Description
This manual shows how to rig the M102, M119, and M101A1 105-millimeter howitzers for low-velocity airdrop from a C-130 or C-17 aircraft. The manual includes procedures and equipment for rigging the M102 and M119 105-millimeter howitzer with the 1 ¼-ton High Mobility Multipurpose Wheeled Vehicle (HMMWV) truck as the prime mover on a 32-foot, type V airdrop platform for low-velocity airdrop from a C-130 or C-17 aircraft. In addition, procedures are given for rigging two M119 105-millimeter howitzers on a single platform with two different ammunition loads and with two 81-millimeter mortars for a low-velocity airdrop from C-130 or C-17 aircraft. The manual is designed for use by all parachute riggers.
Publisher: Createspace Independent Pub
ISBN: 9781481106276
Category : History
Languages : en
Pages : 302
Book Description
This manual shows how to rig the M102, M119, and M101A1 105-millimeter howitzers for low-velocity airdrop from a C-130 or C-17 aircraft. The manual includes procedures and equipment for rigging the M102 and M119 105-millimeter howitzer with the 1 ¼-ton High Mobility Multipurpose Wheeled Vehicle (HMMWV) truck as the prime mover on a 32-foot, type V airdrop platform for low-velocity airdrop from a C-130 or C-17 aircraft. In addition, procedures are given for rigging two M119 105-millimeter howitzers on a single platform with two different ammunition loads and with two 81-millimeter mortars for a low-velocity airdrop from C-130 or C-17 aircraft. The manual is designed for use by all parachute riggers.
Tm 4-48.02 Mcrp 4-11.3j Navsea Ss400-ab-mmo-010 Rev 1 to 13c7-1-5 Airdrop of Supplies and Equipment
Author: United States Government US Army
Publisher: Createspace Independent Publishing Platform
ISBN: 9781544837666
Category :
Languages : en
Pages : 406
Book Description
TM 4-48.02 MCRP 4-11.3J NAVSEA SS400-AB-MMO-010 REV 1 TO 13C7-1-5 Airdrop of Supplies and Equipment: Rigging Airdrop Platforms; Airdrop Derigging and Recovery Procedures; Reference Data for Airdrop Platform Loads TM 4-48.02/MCRP 4-11.3J/NAVSEA SS400-AB-MMO-010/ TO 13C7-1-5 provides doctrinal guidance and direction for United States Army, United States Marine Corps, United States Navy and United States Air Force, units conducting aerial delivery operations. This manual provides information on procedures for rigging airdrop platforms, derigging and recovery procedures and reference data for airdrop platform loads
Publisher: Createspace Independent Publishing Platform
ISBN: 9781544837666
Category :
Languages : en
Pages : 406
Book Description
TM 4-48.02 MCRP 4-11.3J NAVSEA SS400-AB-MMO-010 REV 1 TO 13C7-1-5 Airdrop of Supplies and Equipment: Rigging Airdrop Platforms; Airdrop Derigging and Recovery Procedures; Reference Data for Airdrop Platform Loads TM 4-48.02/MCRP 4-11.3J/NAVSEA SS400-AB-MMO-010/ TO 13C7-1-5 provides doctrinal guidance and direction for United States Army, United States Marine Corps, United States Navy and United States Air Force, units conducting aerial delivery operations. This manual provides information on procedures for rigging airdrop platforms, derigging and recovery procedures and reference data for airdrop platform loads