Advances in Reinforced Soil Structures PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Advances in Reinforced Soil Structures PDF full book. Access full book title Advances in Reinforced Soil Structures by Sanjay Kumar Shukla. Download full books in PDF and EPUB format.
Author: Sanjay Kumar Shukla Publisher: Springer ISBN: 3319635700 Category : Science Languages : en Pages : 169
Book Description
Soil reinforcement is a very useful technique to construct several cost-effective soil structures in an environmentally friendly and sustainable manner. The most commonly used reinforcement materials are galvanised steel strips, geosynthetics in the form of woven geotextiles, geogrids and geocomposites, and fibres from natural and waste products. In recent years, there have been advances in the area of soil reinforcement, especially in the utilization of the technique in field projects. The researchers have also been working to understand the behaviour of reinforced soil considering the field challenges of reinforced soil structures. This edited volume contains contributions on advances in reinforced soil structures, mainly flexible pavements, footings, embankments, stone columns/piles, and slopes, as covered in the subject areas of geosynthetic engineering and fibre-reinforced soil engineering. The first paper by Ioannis N. Markou presents the details of sand-geotextile interaction based on interface tests with conventional and large-scale direct shear equipment. The second paper by Atef Ben Othmen and Mounir Bouassida examines the interface properties of geosynthetic reinforcement by carrying out inclined plane tests under low confinement adapted to landfill covers conditions. The third paper by J.N. Jha, S.K. Shukla, A.K. Choudhary, K.S. Gill1 and B.P. Verma deals with the triaxial compression behaviour of soil reinforced with steel and aluminium solid plates in horizontal layers. The fourth paper by M. Muthukumar and S.K. Shukla describes the swelling and shrinkage behaviour of expansive soil blended with lime and fibres. The fifth paper by S.G. Shah, A.C. Bhogayata and S.K. Shukla provides the test results of shear strength of cohesionless soil reinforced with metalized plastic waste. The sixth paper by Bouacha Nadjet compares the geotextile-reinforced and geogrid-reinforced flexible pavements based on numerical analyses. The seventh paper by S. Kumar, C.H. Solanki, J.B. Patel, P.B. Sudevan and P.M. Chaudhary reports the results of laboratory model tests carried out on a square footing resting on prestressed geotextile reinforced sand. The eighth paper by Sanoop G and Satyajit Patel presents the numerical studies on ground improvement using geosynthetic reinforced sand layer. The ninth paper by ------------------- discusses the bearing capacity prediction of inclined loaded strip footing on reinforced sand by ANN. The tenth paper by Mohamad B.D. Elsawy presents the numerical simulation of an embankment, constructed on reinforced soft soil with conventional stone piles. The eleventh paper by N.O. Sheta and R.P. Frizzi deals with the analysis, design, construction and monitoring of a geosynthetics-reinforced-earth pile-supported embankment serving as an access road. The twelfth paper by S. Banerjee, A. Adhikari, S. Chatterjee and D. Das provides the details of a case study on reinforced slope on soft soil for the approach of a major bridge. We do hope the researchers and the engineers may find the contributions in this volume very useful. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.
Author: Sanjay Kumar Shukla Publisher: Springer ISBN: 3319635700 Category : Science Languages : en Pages : 169
Book Description
Soil reinforcement is a very useful technique to construct several cost-effective soil structures in an environmentally friendly and sustainable manner. The most commonly used reinforcement materials are galvanised steel strips, geosynthetics in the form of woven geotextiles, geogrids and geocomposites, and fibres from natural and waste products. In recent years, there have been advances in the area of soil reinforcement, especially in the utilization of the technique in field projects. The researchers have also been working to understand the behaviour of reinforced soil considering the field challenges of reinforced soil structures. This edited volume contains contributions on advances in reinforced soil structures, mainly flexible pavements, footings, embankments, stone columns/piles, and slopes, as covered in the subject areas of geosynthetic engineering and fibre-reinforced soil engineering. The first paper by Ioannis N. Markou presents the details of sand-geotextile interaction based on interface tests with conventional and large-scale direct shear equipment. The second paper by Atef Ben Othmen and Mounir Bouassida examines the interface properties of geosynthetic reinforcement by carrying out inclined plane tests under low confinement adapted to landfill covers conditions. The third paper by J.N. Jha, S.K. Shukla, A.K. Choudhary, K.S. Gill1 and B.P. Verma deals with the triaxial compression behaviour of soil reinforced with steel and aluminium solid plates in horizontal layers. The fourth paper by M. Muthukumar and S.K. Shukla describes the swelling and shrinkage behaviour of expansive soil blended with lime and fibres. The fifth paper by S.G. Shah, A.C. Bhogayata and S.K. Shukla provides the test results of shear strength of cohesionless soil reinforced with metalized plastic waste. The sixth paper by Bouacha Nadjet compares the geotextile-reinforced and geogrid-reinforced flexible pavements based on numerical analyses. The seventh paper by S. Kumar, C.H. Solanki, J.B. Patel, P.B. Sudevan and P.M. Chaudhary reports the results of laboratory model tests carried out on a square footing resting on prestressed geotextile reinforced sand. The eighth paper by Sanoop G and Satyajit Patel presents the numerical studies on ground improvement using geosynthetic reinforced sand layer. The ninth paper by ------------------- discusses the bearing capacity prediction of inclined loaded strip footing on reinforced sand by ANN. The tenth paper by Mohamad B.D. Elsawy presents the numerical simulation of an embankment, constructed on reinforced soft soil with conventional stone piles. The eleventh paper by N.O. Sheta and R.P. Frizzi deals with the analysis, design, construction and monitoring of a geosynthetics-reinforced-earth pile-supported embankment serving as an access road. The twelfth paper by S. Banerjee, A. Adhikari, S. Chatterjee and D. Das provides the details of a case study on reinforced slope on soft soil for the approach of a major bridge. We do hope the researchers and the engineers may find the contributions in this volume very useful. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.
Author: Hoe I. Ling Publisher: CRC Press ISBN: 9780203911976 Category : Technology & Engineering Languages : en Pages : 532
Book Description
This one-of-a-kind reference evaluates the efficacy, stability, and strength of various soil walls, slopes, and structures enhanced by geosynthetic materials. Offering stimulating contributions from more than 50 leading specialists in the field, Reinforced Soil Engineering compiles recent innovations in design layout, controlled construction, and g
Author: C. N. V. Satyanarayana Reddy Publisher: Springer Nature ISBN: 9811618313 Category : Science Languages : en Pages : 788
Book Description
This volume comprises the select proceedings of the Indian Geotechnical Conference (IGC) 2020. The contents focus on recent developments in geotechnical engineering for sustainable tomorrow. The volume covers the topics related advances in ground improvement of weak foundation soils for various civil engineering projects and design/construction of reinforced soil structures with different fill materials using synthetic and natural reinforcements in different forms.
Author: Jonathan T. H. Wu Publisher: John Wiley & Sons ISBN: 1119375843 Category : Technology & Engineering Languages : en Pages : 414
Book Description
The first book to provide a detailed overview of Geosynthetic Reinforced Soil Walls Geosynthetic Reinforced Soil (GRS) Walls deploy horizontal layers of closely spaced tensile inclusion in the fill material to achieve stability of a soil mass. GRS walls are more adaptable to different environmental conditions, more economical, and offer high performance in a wide range of transportation infrastructure applications. This book addresses both GRS and GMSE, with a much stronger emphasis on the former. For completeness, it begins with a review of shear strength of soils and classical earth pressure theories. It then goes on to examine the use of geosynthetics as reinforcement, and followed by the load-deformation behavior of GRS mass as a soil-geosynthetic composite, reinforcing mechanisms of GRS, and GRS walls with different types of facing. Finally, the book finishes by covering design concepts with design examples for different loading and geometric conditions, and the construction of GRS walls, including typical construction procedures and general construction guidelines. The number of GRS walls and abutments built to date is relatively low due to lack of understanding of GRS. While failure rate of GMSE has been estimated to be around 5%, failure of GRS has been found to be practically nil, with studies suggesting many advantages, including a smaller susceptibility to long-term creep and stronger resistance to seismic loads when well-compacted granular fill is employed. Geosynthetic Reinforced Soil (GRS) Walls will serve as an excellent guide or reference for wall projects such as transportation infrastructure—including roadways, bridges, retaining walls, and earth slopes—that are in dire need of repair and replacement in the U.S. and abroad. Covers both GRS and GMSE (MSE with geosynthetics as reinforcement); with much greater emphasis on GRS walls Showcases reinforcing mechanisms, engineering behavior, and design concepts of GRS and includes many step-by-step design examples Features information on typical construction procedures and general construction guidelines Includes hundreds of line drawings and photos Geosynthetic Reinforced Soil (GRS) Walls is an important book for practicing geotechnical engineers and structural engineers, as well as for advanced students of civil, structural, and geotechnical engineering.
Author: Awdhesh Kumar Choudhary Publisher: Springer Nature ISBN: 981161993X Category : Science Languages : en Pages : 335
Book Description
This book presents select proceedings of the National conference on Geo-Science and Geo-Structures (GSGS 2020). It provides sustainable solutions to various challenges encountered in the field of geotechnical engineering. The topics presented include advanced characterization to study the behavior of geomaterials, shallow and deep foundations including tunneling, use of geosynthetics and other soil reinforcing materials in minimizing slope failures and landslides, dynamics of soils and foundations, and its connection with energy geotechnics, transportation geotechnics, and offshore geotechnics. The book further highlights various aspects of ground improvement techniques by incorporating the use of industrial by-products, forensic analyses of geo-structures, instrumentation and sensing techniques in geotechnical engineering and issues associated with geo-environmental engineering. The book will be a valuable reference for budding researchers, academicians, practitioners and policymakers interested in sustainable practices associated with geotechnical engineering and related domains.
Author: Ed Ellis Publisher: CRC Press ISBN: 0203885945 Category : Technology & Engineering Languages : en Pages : 788
Book Description
Highways provide the arteries of modern society. The interaction of road, rail and other transport infrastructure with the ground is unusually intimate, and thus needs to be well-understood to provide economic and reliable infrastructure for society. Challenges include not only the design of new infrastructure (often on problematic ground), but inc
Author: T. G. Sitharam Publisher: Springer Nature ISBN: 9811560951 Category : Science Languages : en Pages : 484
Book Description
This book is designed to serve as a comprehensive resource on cellular confinement systems or geocells, covering technologies and their applications in geotechnical engineering. The book discusses all aspects of geocells and related technologies, and covers the subjects from conceptual basics to recent advances. The chapters of this book are written by renowned international experts and its contents include detailed case studies from both academic and industry experts. This book is a one-stop reference work for academicians, students, and practicing engineers in the global geotechnical community.
Author: Vasant Matsagar Publisher: Springer ISBN: 8132221877 Category : Technology & Engineering Languages : en Pages : 1033
Book Description
The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.
Author: J. Zaras Publisher: Elsevier ISBN: 008055170X Category : Technology & Engineering Languages : en Pages : 779
Book Description
This volume contains the papers presented at the Third International Conference on Thin-Walled Structures, Cracow, Poland on June 5-7, 2001. There has been a substantial growth in knowledge in the field of Thin-Walled Structures over the past few decades. Lightweight structures are in widespread use in the Civil Engineering, Mechanical Engineering, Aeronautical, Automobile, Chemical and Offshore Engineering fields. The development of new processes, new methods of connections, new materials has gone hand-in-hand with the evolution of advanced analytical methods suitable for dealing with the increasing complexity of the design work involved in ensuring safety and confidence in the finished products.Of particular importance with regard to the analytical process is the growth in use of the finite element method. This method, about 40 years ago, was confined to rather specialist use, mainly in the aeronautical field, because of its requirements for substantial calculation capacity. The development over recent years of extremely powerful microcomputers has ensured that the application of the finite element method is now possible for problems in all fields of engineering, and a variety of finite element packages have been developed to enhance the ease of use and the availability of the method in the engineering design process.
Author: Jun Otani Publisher: CRC Press ISBN: 1000942503 Category : Technology & Engineering Languages : en Pages : 917
Book Description
Earth reinforcement techniques are used worldwide, providing dependable solutions to a wide range of geotechnical engineering problems.Well-established earth reinforcement technologies are regularly augmented by new materials, innovative construction techniques and advances in design and analysis. Furthermore, reinforced earth structures are increasingly seen as expedient and economical techniques in disaster situations, such as earthquakes, flooding or tsunamis. NEW HORIZONS in EARTH REINFORCEMENT contains contributions from the 5th International Symposium on Earth Reinforcement, Kyushu, Japan, 14-16 November 2007, and presents the very latest earth reinforcement techniques and design procedures. The volume showcases advances in materials and emerging applications, with special emphasis on disaster mitigation and geoenvironmental issues. The book will be invaluable to academics and professionals in geotechnical engineering.
Author: Sanjay Kumar Shukla
Author: Sanjay Kumar Shukla
Author: Hoe I. Ling
Author: C. N. V. Satyanarayana Reddy
Author: Jonathan T. H. Wu
Author: Awdhesh Kumar Choudhary
Author: Ed Ellis
Author: T. G. Sitharam
Author: Vasant Matsagar
Author: J. Zaras
Author: Jun Otani